EC- except needs minor work (clean and adjust electronics, rewire tone control, dress frets, setup, etc. - sold AS-IS), black finish, offset double cutaway alder body, bolt-on maple neck, 24-fret rosewood fingerboard, dot inlays, 1-9/16" nut width, 34" scale, one split-coil pickup, chrome hardware, great student bass, with rough thermoplastic HSC (black lining) (SN:MN30270)
55U-4261
$135.00
WASHBURN RB2000 BANTAM (1999)
12 Photos
EC- except needs some work (install 9-volt battery, clean electronics and hardware, polish frets, setup, etc. - sold AS-IS), natural finish, Bantam Series, offset double cutaway body, bolt-on maple neck, 24 fret rosewood fingerboard, offset pearl dot inlays, 1 humbucking pickup, brushed chrome hardware, strings-thru-body bridge, 1-1/2" nut width, 34" scale, made in Korea (SN:CK99100008)
55U-4214
$275.00
|
WARWICK STREAMER STANDARD 5 (2001)
9 Photos
EC+, five strings, double cutaway carolena body, bolt-on ovankol neck, 24-fret wenge fingerboard without inlays, 1-3/4" nut width, ~34" scale, two MEC soapbar pickups, passive electronics, chrome hardware, made in Germany, with Warwick gigbag (SN:F-085186-01)
55U-4362
$585.00
|
WARWICK STREAMER STAGE I (2004)
12 Photos
EC-, 5 strings, transparent red satin finish, contoured flamed maple body, 7-piece neck-thru-body, 24-fret wenge fingerboard, side dots only, 1-7/8" nut width, 34" scale, two MEC soapbar style pickups, 3-band active EQ, gold hardware, made in Germany, with deluxe gigbag (SN:D-105582 04)
55U-4215
$1,850.00
|
WARWICK ROCKBASS CORVETTE IV (2004)
13 Photos
EC except could use minor work (dress frets, setup, etc. - sold AS-IS), gloss transparent black finish, double cutaway alder body, bolt-on maple neck, 24-fret rosewood fingerboard, side dots only, 1-1/2" nut width, 34" scale, two MEC J-style pickups, 2-band active EQ, chrome hardware, made in China, with thermoplastic HSC (black lining) (SN:RB SN J-046483 5-07)
55U-4344
$350.00
|
WARWICK CORVETTE STANDARD IV FRETLESS (2000)
11 Photos
EC-, bubinga body, bolt-on wenge neck, fretless ebony fingerboard, side dot markers only, 1-17/32" nut width, 34-1/8" scale length, 2 MEC J style pickups, passive electronics, chrome hardware, carbon/teflon alloy adjustable nut, natural oil finish, very articulate bass, flatwound strings, made in Germany (SN:J-109902-02)
55U-4359
$685.00
|
WARWICK CORVETTE FNA (1998 )
13 Photos
EC, five (5) string, honey satin finish, nice looking maple top on ash body, bolt-on wenge and ovangkol neck, wenge fretboard, side dot markers, 24 frets, MEC humbucking pickup, 3 band EQ, contour "slap" switch (pull up on volume), gold hardware, built in Germany, very punchy sound, 1-25/32" (adjustable) Teflon "Just-a-Nut", 34" scale, on consignment, with gigbag (SN:J-051950-98)
55U-4351
$1,250.00
|
SILVERTONE MODEL 1444 BASS (c.1962)
13 Photos
VG-EC, black finish, masonite top and back on a poplar frame, white side walls, single cutaway, bolt-on neck, dolphin headstock, rosewood fretboard, dot markers, 24 frets, 1 lipstick tube single coil pickup, adjustable wood bridge saddle, white plastic knobs, original clear pickguard, 1-5/8" aluminum nut, 30" scale, made in the USA by Danelectro for the Sears Company, with OHSC (red plush lining)
55U-4365
on hold...$750.00
|
SCHECTER EXOTIC 4-STRING (2005)
11 Photos
EC- except needs work (resolder output jack, replace batteries and clean battery clip, restring and set up, etc. - sold AS-IS), Diamond Series, natural satin finish, 5-piece wenge / bubinga neck through body, zebrawood top on mahogany body wings, 24-fret rosewood fingerboard, dot inlays, 1-1/2" brass nut, 34" scale, zebrawood headstock overlay, two Duncan Design SB-101 pickups, active tone circuit, Diamond Custom bridge, gold hardware, import model (SN:S050210757)
55U-4293
$425.00
|
PEDULLA RAPTURE
13 Photos
EC, 5 strings, natural finish (with matching headstock), soft maple body, bolt-on maple neck, rosewood fretboard, dot inlays, 22 frets, 2 Bartolini J-style pickups, active electronics, tortoise-w-b-w pickguard, modern bridge, tuners and hardware, great look and sound, built in the USA, 1-15/16" nut, 34" scale, with OHSC, on consignment (SN:RB-6469)
55U-4364
$1,500.00
|
PEAVEY MILLENIUM USA (recent)
13 Photos
EC+, pearl blue metallic color-change finish, offset double cutaway body, bolt-on one-piece maple neck, 21 fret pau ferro fingerboard with maple dot inlays, 1 classic single coil and one large humbucking style pickup, active electronics, volume, blend and 3-band EQ (sweepable mid-band EQ), strings thru body or top-load "Quadrajust" bridge by Hipshot, satin black hardware, 35" scale, 1-9/16" nut width, Hipshot tuners with low "E" D-tuner and black buttons, a real nice bass, made in the USA, with thermoplastic OHSC (black lining) (SN:11229536)
55U-4300
$550.00
|
PEAVEY MILLENIUM STANDARD 4 (2003)
13 Photos
EC++, sunburst finish, bolt-on maple neck, 21-fret rosewood fingerboard with dot inlays, 1-1/2" nut width, 34" scale, 2 Peavey pickups, one split-style and one single coil, black hardware, made in USA, a very nice bass in this price range, on consignment, with TKL brand thermoplastic OHSC (SN:11798904)
55U-4264
$500.00
|
PEAVEY CIRRUS V (1998)
13 Photos
EC-, 5 strings, wenge top, graphite reinforced 5-piece maple / walnut neck-thru-body construction, walnut body wings, satin finish on neck and body, 24-fret pau ferro fingerboard, abalone "C" inlay at 12th fret, 1-9/16" nut width, 2-13/16" width at 24th fret, 35" scale, two Peavey VFL humbucking pickups, 3-band active EQ, gold hardware, black graphite peghead overlay, weighs 9.0 lbs, with rectangular thermoplastic OHSC (green lining) (SN:09981784)
55U-4309
$950.00
|
PEAVEY CIRRUS 4 (recent)
13 Photos
EC, bubinga top, graphite reinforced 5-piece maple/walnut neck-thru-body construction, walnut body wings, satin finish on neck and body, 24-fret pau ferro fingerboard, abalone "C" inlay at 12th fret, 1-13/16" nut width, 2-13/16" width at 24th fret, 35" scale, two Peavey VFL humbucking pickups, 3-band active EQ, gold hardware, patterned graphite peghead overlay, with rectangular thermoplastic OHSC (green lining) (SN:10441665)
55U-4301
$975.00
|
PEAVEY AXCELERATOR 2-T FRETLESS (1998)
13 Photos
EC except needs some work (repair neck, truss rod is at maximum adjustment, neck is straight now, setup, etc. - sold AS-IS), metallic black finish, offset double cutaway solid body, bolt on maple neck, fretless 4 string, rosewood fretboard, no lines side dots only, 2 soap bar type pickups, active electronics with volume, blend and 2-band EQ, satin chrome 2-Tek bridge, pearloid-b-w pickguard, chrome sealed gear tuners, 35" scale, 1-5/8" nut width, 9.8 lbs, made in USA, with thermoplastic OHSC (black lining) (SN:09220932)
55U-4282
$385.00
|
NS STICK GUITAR BASS (recent)
13 Photos
EC+, two-hand touchboard instrument with eight strings (tap with two hands), red satin finish body, wenge fingerboard with pearl dot inlays, ~34" scale length, black hardware, four EMG single coil pickups, switchable stereo/mono output for two groups of four strings or one group of eight, active electronics, 3-position selectors and independent bass and treble controls, on consignment, with heavy duty OHSC (SN:EHC 30201)
55U-4372
$1,800.00
|
MUSIC MAN STINGRAY FRETLESS (1979)
13 Photos
EC-, sunburst finish on alder body (upper portion of body is darker than lower portion and shows in finish), original 3-bolt maple neck with tilt adjust, fretless rosewood fingerboard, 1-11/16" nut width, 34" scale length, one Music Man humbucking pickup, 9-volt active electronics (volume, 2-band EQ), original string-through-body bridge (rubber mutes and metal bases are missing, adjusting screws are present), serial number is on bridge, b-w-b plastic pickguard, Pino Paladino used one of these on tons of hits in 1980's and 90's, body date is JUL 11, 1979, neck date is JUL 25, 1979, pot codes date to 13th week of 1979, 1/4" output jack likely changed (original(?) included), built in the USA, with rectangular black tolex OHSC (orange lining) (SN:B 013363)
55U-4342
$2,500.00
|
MODULUS QUANTUM Q6 (1995)
13 Photos
VG-EC, 6 strings, transparent vintage natural finish, offset double cutaway alder body, figured maple top, bolt-on graphite neck (pre-trussrod construction, neck is straight), composite fingerboard with 24 frets, 2" nut width, 35" scale, two Bartolini soapbar pickups with 18-volt, volume, blend and 3-band active EQ, black hardware, chrome treble knob, Gotoh tuners, BIG TONE!!! made in USA, on consignment, with rectangular black vinyl covered HSC (gray lining) (SN:951739)
55U-4346
$2,800.00
|
MODULUS QUANTUM Q6 (1992)
13 Photos
VG-EC, 6 strings, transparent natural finish, offset double cutaway alder body, cocobolo top, bolt-on graphite neck (pre-trussrod construction, neck is straight but has a a quarter-size ding on bass side behind 10th fret), composite fingerboard with 24 frets, pearl dot inlays, 2" nut width, 35" scale, two Bartolini soapbar pickups, 9-volt active system with, volume, blend, bass and treble controls, two 3-way coil tap, series / parallel switches, worn gold hardware, Gotoh tuners, made in USA, with rectangular black vinyl covered HSC (black lining) (SN:920414)
55U-4313
$2,200.00
|
KRAMER FOCUS 7000 (1980's)
13 Photos
EC- except needs some work (dress frets, clean electronics, repair or replace microphonic bridge pickup, setup, etc. - sold AS-IS), offset double cutaway body, black finish, bolt-on neck, rosewood fingerboard, pearl dot inlays, 21 frets, passive P-bass and double J pickup configuration, 2 volume controls, tone control, 3-way pickup selector switch, and coil switch for bridge pickup, built in Japan, with Fender® thermoplastic HSC (black lining) (SN:65778)
55U-4371
$300.00
|
IBANEZ SR400 SOUNDGEAR (2002)
10 Photos
EC-, except needs some work (trouble shoot electronics, neck pickup cuts out, replace screws in control cavity cover, setup, etc. sold AS-IS), light amber finish, offset double cutaway body, bolt-on 3-piece maple neck, 24 fret rosewood fretboard with dot inlays, smokey chrome hardware, body matching peghead overlay, 2 pickup configuration, (DXJ and DXP), active electronics, 1 volume, pickup blend, and 3-band EQ, replacement (home-made) control cavity cover, 34" scale, 1.5" nut width, made in Korea, price reduced (SN:02122525)
55U-4093
$200.00
|
IBANEZ SOUNDGEAR SR-400
14 Photos
EC-, silver / gray finish, soundgear body, bolt-on neck, rosewood fretboard, dot inlays, 24 frets, PJ pickup configuration, active electronics, modern style bridge and tuners, sold AS-IS (needs backplate, clean up, strings, set up, etc.), 1-9/16" nut, 34" scale, with OHSC (SN:C02120116)
55U-4208
$235.00
|
IBANEZ ATK700 (2006)
11 Photos
EC+, 4-string, transparent blue finish on quilted-maple veneer top, offset double cutaway body, bolt-on, 5-piece maple / mahogany neck, double dot black fretboard markers, headstock overlay matches body color, triple coil humbucking pickup, string-thru body bridge / tailpiece, chrome hardware, active electronics, ~34" scale, 1-5/8" nut width, great growl, weighs 10.4 lbs. made in Korea, with wooden oblong OHSC (burgundy lining) (SN:06117397)
55U-4376
$500.00
|
IBANEZ ATK305 (2008)
10 Photos
EC+, black sparkle finish, maple neck and fingerboard, huge 3 coil humbucking pickup, active electronics with individual bass, mid, treble, volume and pickup coil select, large steel combination pickup surround / bridge, strings through body, white pearloid pickguard, 2 and 3-on-a-side headstock matches body finish, all original, 1-13/16" nut width, 34" scale, made in Indonesia, weighs 11.8 lbs. (SN:I080220706)
55U-4378
$395.00
|
GIBSON SG REISSUE BASS (2008)
13 Photos
EC+, essentially an EB-3 with simplified electronics, cherry finish, mahogany body and neck, large low hovering cloud tone neck pickup, mini humbucking bridge pickup, 2 volumes, master tone, modern style 3 point bridge, Grover open gear tuners, great mother of White Room tone, 1-5/8" nut, 30-1/2" scale, with OHSC (SN:009980371)
55U-4333
$1,150.00
|
GIBSON EB-0 (1973)
14 Photos
VGC+, how do you spell L-O-W E-N-D, mahogany body and neck refinished natural (this started life with a natural finish, so it looks about right), rosewood fretboard, dot markers, 21 frets, the low hovering cloud pickup, electronics, bridge, bridge cover, tuners, hardware and b-w-b pickguard are all original, a great workhorse, 1-5/8" nut, 30-1/2" scale, with newer HSC (SN:030838)
55U-4251
$785.00
|
GIBSON EB-0 (1960)
13 Photos
VG-EC, transparent cherry red finish, mahogany Les Paul Junior style double cutaway body, set mahogany neck (neck has been reglued at some point and 3 large screws were added to joint), 20-fret rosewood fingerboard with pearl dot inlays (one replaced dot at 12th fret), 1-5/8" nut width, ~30" scale length, one humbucking pickup with black plastic cover and adjustable pole pieces, one volume control and one tone control with metal pointers, black plastic pickguard, cast one-piece bridge-tailpiece combination, 4 stairstep "Banjo" tuners with white plastic buttons (one button is a replacement), pearl "Gibson" and crown headstock inlays (small chip in overlay near "G" string), pots codes date to 1959, this is the same Gibson bass model that Gene Simmons used early in his "KISS" career, on consignment, with newer rough condition HSC (burgundy lining, broken handle, torn tolex) (SN:0 8595)
55U-4324
$3,500.00
|
G&L LEGACY BASS (1991)
13 Photos
EC, rare metallic red-burst finish, classic double cutaway body, maple neck, black dot markers, split coil pickup with white cover, volume and tone controls, metal knobs, w-b-w pickguard, rugged G&L design bridge, chrome hardware except for textured black neck plate, great "old school" look, 1-11/16" nut, 34" scale, on consignment, with rough (all latches broken) OHSC (black lining) (SN:302244B)
55U-4306
$700.00
|
G & L SB-2 FRETLESS (1998)
13 Photos
EC, black finish, bolt-on maple neck, fretless ebony fingerboard with white lines, black side dots only, 1-1/2" nut width, 34" scale, P-J pickup configuration, 2 volume controls (no tone control), nickel hardware, black-w-b pickguard, on consignment, with thermoplastic OHSC (black lining, one broken latch) (SN:B031027)
55U-4273
$750.00
|
FENDER® PRECISION BASS® (1979)
13 Photos
VG-EC, sienna sunburst finish, bolt-on maple neck with skunk stripe, 20-fret rosewood fingerboard with pearl dot markers, 1-5/8" nut width, ~34" scale length, one split-coil pickup, black-w-b plastic pickguard, one volume control, one tone control, pots date 15th and 22nd week of 1979, chrome hardware, very clean and cool, weight 10.4 lbs, front is very clean, area of buckle wear (~3"x 1.5") on back, some finish checking, bridge cover only, with black tolex covered OHSC (blue lining, case handle is damaged) (SN:S891919)
55U-4358
$1,800.00
|
FENDER® PRECISION BASS® (1966)
13 Photos
VG-EC, vivid 3 tone sunburst finish, maple neck with rosewood fingerboard, pearl dot inlays, neck dated 5 FEB 66C, pickup, pots (dated 8th week of '66), bridge, tuners and hardware are all original (except for 4 pickguard screws), includes both covers, tortoise-w-b-w pickguard with ground plate, a great bass, killer "fill up the band" tone, 1-3/4" nut, 34" scale, 8.8 lbs, with OHSC (orange lining) (SN:125564)
55U-4285
$5,500.00
|
FENDER® PRECISION (1974)
11 Photos
VG-EC, a little on the weathered side but still a fine machine, sunburst finish, 1 piece maple neck, dot markers, frets have been pulled and maple inserts installed (not a pretty job but functional), pickup, pots (29th week of '74), bridge, tuners and hardware are all original, newer 1 ply black pickguard, big (BIG) sound, 1-11/16" nut, 34" scale, with OHSC, price reduced (SN:616969)
55U-4091
$1,600.00
|
FENDER® PRECISION (1964)
14 Photos
EC-, this bass is very COOL, black finish, great wide feeling neck marked 5 SEP 64C, rosewood fretboard, clay dot markers, 20 frets, w-b-w pickguard, pickup, electronics, tuners, bridge and hardware all original, the only things that have been changed are the pickup lead wires. The pots are dated 20th week of '64, the sound of this bass is amazing and it plays great, a tone monster, 1-13/16" nut, 34" scale, with OHSC, on consignment - price reduced (SN:L45885)
55U-4027
$10,000.00
|
FENDER® PRECISION (1960)
12 Photos
VG-EC, 3 tone sunburst finish has faded in a very unusual way (looks cool), finish on wide / thin neck is in very good shape, rosewood fretboard, clay dot markers, 20 frets, pickups and electronics all original except tone pot dated 40th week of '63, tortoise-w-b-w pickguard, bridge, tuners and hardware are all original, bridge and pickup covers are here and on the bass, Duck Dunn, James Jamerson, the KILLER sound, 1-11/16" nut, 34" scale, with newer black HSC (blue lining), on consignment - price reduced (SN:44800)
55U-4138
$10,500.00
|
FENDER® JAZZ BASS® (c.1979/80)
13 Photos
VG-EC, sienna sunburst finish, ash body, white-bound (3-bolt) maple neck with skunk-stripe, pearloid block inlays, 20 frets, b-w-b pickguard, electronics, hardware, bridge, tuners and covers are all original, original pickups, black strat®-type knobs, great look and BIG sound, 1-1/2" nut width, 34" scale, with both covers, pots date 31st week of 1979, no neck or body dates, appears to be all original, some knicks and dings but overall very clean!! weight 11.2 lbs, with HSC (cabernet lining) (SN:S8848724)
55U-4368
$1,900.00
|
FENDER® JAZZ BASS® (1967)
17 Photos
VG-EC, showing only the play wear you'd expect on a bass that sounds this good, this is just an exceptional instrument, Lake Placid blue finish with matching headstock, heaviest wear is buckle rash on back, neck marked 7 DEC 66A, bound rosewood fretboard, block inlays, 20 frets, pots dated 13th week of '66, neck pickup marked 12-30-66, bridge pickup marked 1-3-67, w-b-w pickguard, bridge, tuners and hardware are all original, a real Hot Dog, 1-1/2" nut, 34" scale, with OHSC, price reduced (SN:175768)
55U-4111
$12,000.00
|
FENDER® JAZZ BASS® (1964)
15 Photos
VGC+, here is a very cool working man's bass, sunburst finish on body is original and shows lots of play wear but looks cool, neck has been refinished (pro job) but the original decals are intact, original neck stamp reads 5 JAN 64C but an A has been inked over the C (most Jazz Basses are A necks), pots dated 10th week of '64, pickups and electronics all original, bridge and tuners are original, 1 new (G) bridge piece installed, tortoise-w-b-w pickguard, the bass looks slick and sounds HUGE, there is a small metal plate installed in front of the treble side of bridge (can't figure out why, but we left it), pickup and bridge covers in case, 1-5/8" nut, 34" scale, with cool cream OHSC (good shape except handle replaced with rope), on consignment - price reduced (SN:L26604)
55U-4015
$9,800.00
|
FENDER® AMERICAN STANDARD JAZZ BASS® (2008)
13 Photos
EC++, black finish, alder body, bolt-on maple neck, 20-fret maple fingerboard, dot inlays, 1-1/2" nut width, 34" scale, two single coil pickups, combo bridge (either top-load or strings through body), chrome hardware, w-b-w pickguard, with ATA-style OHSC (SN:Z8008156)
55U-4355
$925.00
|
FENDER® AMERICAN STANDARD JAZZ BASS® (2008)
13 Photos
EC+, blizzard pearl finish, bolt-on maple neck, 20-fret rosewood fingerboard, dot inlays, 1-1/2" nut width, 34" scale, combo bridge (strings thru-body or back of bridge), two single coil pickups, standard 2 volume and one tone controls, w-b-w plastic pickguard, chrome hardware, with OHSC (black lining) (SN:Z8060650)
55U-4323
$925.00
|
FENDER® AMERICAN JAZZ DELUXE V (1998)
13 Photos
EC, five string, teal green transparent finish, rosewood fretboard, abalone dot inlays, 22 frets, Fender® Noiseless pickups, active electronics, w-b-w pickguard, very nice, 1-7/8" nut, 34" scale, with OHSC (blue lining) (SN:DN808529)
55U-4335
$1,000.00
|
FENDER® AMERICAN JAZZ DELUXE V (1998)
11 Photos
EC, five string, teal green transparent finish, rosewood fretboard, abalone dot inlays, 22 frets, Fender® Noiseless pickups, active electronics, w-b-w pickguard, very nice, 1-7/8" nut, 34" scale, weighs 10.4 lbs, made in USA, with OHSC (SN:DN802268)
55U-4326
$1,000.00
|
ESP LTD B-104 (c.2003)
11 Photos
VG-EC except could use (minor set up, etc. - sold AS-IS), transparent gloss black finish with matching headstock, offset double cutaway body, bolt-on maple neck, 24-fret rosewood fingerboard with dot inlays, 2 soapbar style pickups, volume, blend, and 2-band EQ, black hardware, top-load bridge, 34" scale, 1-9/16" nut width, built in Indonesia (SN:IR0318829)
55U-4284
$199.00
|
ESHENBAUGH STALLION SIX STRING BASS (2005)
12 Photos
EC-, 6-string extended range bass (this style is often referred to as a "Contrabass"), body meets neck at the 10th fret on bass side bout and at 24th fret on treble side, 5-piece maple neck is set into birch(?) center body section, ash body wings, 3-piece figured-mahogany top, 24 fret rosewood fingerboard, abalone inlay at the 3rd fret, side dots, two Bartolini mk-1 soap-bar pickups, volume, blend, bass, mid and treble controls, 18-volt preamp, strings terminate at bridge, sealed gear tuners, smoke chrome hardware, really good sound and playability, 2-1/4" nut width, 34" scale, satin natural finish (sprayed finish is a bit rough and uneven) made in USA, on consignment, with Eshenbaugh / ProTec gigbag (SN:070505)
55U-4347
$2,500.00
|
ERNIE BALL STINGRAY HH4 (recent)
13 Photos
EC, natural finish, bolt-on maple neck, 21-fret rosewood fingerboard with white dot markers, two Music Man humbucking pickups, active electronics (volume, 3-band EQ and 5-way switch), top-load bridge, chrome hardware, tortoise-w-b-w pickguard, 34" scale, 1-11/16" nut width, HipShot D-tuner installed on "E" string, built in the USA by Ernie Ball, with rectangular black thermoplastic OHSC (black lining) (SN:E52066)
55U-4327
$1,200.00
|
ERNIE BALL MUSIC MAN STINGRAY 4 (2001)
11 Photos
EC, ash body with natural finish, bolt-on maple neck, 21-fret rosewood fingerboard with white dot markers, one Bartolinin MM-style humbucking pickup (top of pickup shows wear from strings vibrating against it), Music Man active electronics date to Nov. 2001 (volume, 3-band EQ), top-load bridge, chrome hardware, replacement pearloid-b-w pickguard, ~ 34" scale, ~ 1-11/16" nut width, built in the USA, weighs 9.0 lbs, sounds good (SN:E27479)
55U-4382
$1,065.00
|
ERNIE BALL MUSIC MAN STERLING (2001)
13 Photos
EC, transparent amber finish on ash body, 1 piece maple maple neck, 22 fret rosewood fingerboard, white dot inlays, 1 humbucking pickup, active electronics with 3-way blade switch, tortoise-w-b-w pickguard, build in USA by Ernie Ball, 1-1/2" nut, 34" scale, weight 8.8 lbs, on consignment, made in USA, with thermoplastic OHSC (NIKO painted in white several times on outside, black lining) (SN:F03452)
55U-4274
$950.00
|
ERNIE BALL MUSIC MAN S.U.B. IV (2003)
12 Photos
EC-, double cutaway Stingray-style body with textured black finish, poplar body, bolt-on maple neck, 21-fret rosewood fingerboard, 1-11/16" nut width, 34" scale, one humbucking pickup, active bass and treble controls, textured finish aluminum pickguard, chrome hardware, made in the USA, on consignment, with gigbag (SN:X03968)
55U-4339
$500.00
|
ALEMBIC EPIC 4 (1998)
13 Photos
EC, gloss natural finish, offset double cutaway mahogany body with flamed maple top, 3-piece maple set neck, ebony fretboard, no inlays only side dots, 24 frets, adjustable brass nut, two Alembic MXY56 soapbar style pickups, active preamp with volume, pickup blend, bass and treble EQ, adjustable brass bridge and separate tailpiece, gold Alembic / Gotoh tuners, looks great, sounds thick and punchy, made in the USA, 1-9/16" nut, 34" scale, 8.8 lbs, with SKB thermoplastic HSC (black lining) (SN:98W11385)
55U-4315
$1,750.00
|
Electric Basses
 other vintage and used categories . . .
|
|
|
|
| 
