EC- except needs some work (reglue loose bridge, dress frets, heat press neck, setup, etc. - sold AS-IS), gloss natural finish, solid cedar top, 14-7/8" lower bout, mahogany back and sides, mahogany neck with 19 fret rosewood fretboard, 2-1/16" nut width, 650 mm scale, maple bound body, rosewood bridge, 3-on-a-plate open gear tuners with white plastick buttons, made in Spain, with gigbag
28U-2137
$165.00
FAVILLA C-6 CONCERTO (1960's)
14 Photos
VG-EC but needs work (glue loose back binding, file fret ends, replace saddle, restring and set up, etc. - sold AS-IS), solid cedar top, mahogany sides and solid back, 12-fret mahogany neck with slotted headstock, 19-fret rosewood fingerboard with side dot markers, rosewood bridge, black body binding, simple rosette, 3-on-a-plate tuners with cream buttons, gold "FAVILLA" headstock crest with crown, 14-5/8" lower bout, 3-1/2" to 4" body depth, 25" scale (635mm), 2-1/16" (52mm) nut width, built in the U.S.A. by Herk Favilla and company, with rough semi-HSC (peach lining) (SN:500477)
28U-2095
$385.00
|
GIANNINI AN21 (1980's)
12 Photos
EC- except needs work (cut down top of saddle to lower action, polish frets, clean, restring and set up, etc. - sold AS-IS), all laminate woods, spruce top, Imbuia? (Brazilian walnut) back and sides, mahogany neck with carving on front of headstock, 19-fret rosewood fingerboard, side dot markers, rosewood bridge, maple body binding, wood top purfling, decorative soundhole rosette, 14-1/4"lower bout, 610mm (~24") scale, 1-7/8" nut width, 3-5/8" to 4" body depth, built in Brazil, with SSC (SN:11979 / 01038?)
28U-2157
$69.00
|
GOODALL BC425 (1986)
21 Photos
EC-, fine handcrafted guitar from Goodall, Western red cedar top, Brazilian rosewood sides and bookmatched back, mahogany neck, Brazlian rosewood peghead overlay, Koa underlay, 19-fret ebony fingerboard, Brazilian rosewood bridge, koa body binding and soundhole rosette, 14-7/8" lower bout, 648mm scale, 52mm (2-1/16") nut width, label inside reads "James Goodall / music / Fort Bragg, California", and is signed by James, quality tuners with pearl buttons, very nice! With De Cuir HSC (blue lining), on consignment (SN:2-16-86)
28U-2138
$6,850.00
|
LA PATRIE CW CONCERT (recent)
13 Photos
EC+ except for repired crack near low "E" string on headstock, rounded cutaway, gloss natural finish, solid cedar top, mahogany back and sides, 12-fret mahogany neck with slotted headstock, 19-fret rosewood fingerboard, 2-1/16" nut width, 650mm scale, rosewood bridge, cream-bound body, fancy rosette, gold tuners with pearloid buttons, made in Canada, with HSC (grey lining) (SN:06484568)
28U-2144
$395.00
|
MARTIN 00-18C (1971)
20 Photos
VGC+ except needs work (repair top center seam, repair back cracks, cut down/reglue bridge, level and dress frets, strings, set-up etc. - sold AS-IS), 00-size, spruce top, mahogany back and sides, 12-fret mahogany neck, slotted headstock, 19-fret rosewood fingerboard, 2" nut width, 642mm scale length, Brazilian rosewood bridge, 3-on-a-plate tuners with white plastic buttons, with OSSC (red lining) (SN:275619)
28U-2142
$895.00
|
RAMIREZ AE (2004)
13 Photos
EC+, Estudio Series, all solid woods, spruce top, Indian rosewood back and sides, Spanish cedar neck with ebony reinforcement, 19-fret ebony fingerboard, rosewood bridge, rosewood peghead overlay, gold tuners, 650mm scale, 51mm nut width, 14-5/8" lower bout, 3-7/8" to 4-1/8" body depth, this is near the top end of Estudio line and the only Estudio Model Ramirez offers with a spruce top, very nice! With thermoplastic Humi-Case HSC (gray with black lining) (SN:65826)
28U-2146
$2,100.00
|
S. YAIRI MODEL 8900 (1973)
11 Photos
EC except could use minor work (polish frets, restring and set up, etc. - sold AS-IS), solid cedar top, mahogany back and sides, 12-fret mahogany neck, 19-fret rosewood fingerboard, side dot markers, ebonized bridge, 655mm scale, 2" nut width, ~4" body depth, 14-3/8" lower bout, label reads "Hand Made / Yairi Guitar / YAIRI GAKKI LTD. / NAGOYA / MADE IN JAPAN / AD.1973", label signed by S Yairi, inside back of guitar is stamped "SADA YAIRI / JAPAN", built in Japan (SN:G 1014)
28U-2159
$500.00
|
STRUNAL 1/2 SIZE (recent)
13 Photos
EC except needs work (level and dress frets, strings, setup, etc. - sold AS-IS), 1/2 size, 12-3/8" lower bout, natural finish, spruce top, mahogany back and sides, 12-fret mahogany neck, 18-fret rosewood fingerboard, 1-11/16" nut width, 530mm scale length, fancy soundhole rosette, 3-on-a-plate open-gear tuners with white plastic buttons, made in the Czech Republic, with black gigbag (SN:4655)
28U-2163
$95.00
|
TAKAMINE C132S (1976)
16 Photos
VGC+ except needs work (reseat and dress frets, restring and set up, etc. - sold AS-IS), gloss natural finish, solid cedar top, rosewood back and sides, mahogany neck with slotted headstock, 19-fret rosewood fingerboard, rosewood bridge (appears to have been reglued, some excess glue on top in front of bridge), 2-1/16" (52mm) nut width, 660mm scale, 14-1/2" lower bout, ~3-3/4" body depth, attractive rosette, brown body binding, gold tuners with plastic pearloid buttons, made in Japan, with flat lid wooden HSC (black lining) (SN:76120153)
28U-2097
$475.00
|
TAKAMINE EG522C (recent)
12 Photos
EC+ except needs some work (shim and recut nut, shim saddle slot and adjust for even pickup response, setup, etc. - sold AS-IS), nylon string, soft cutaway classical body, spruce top, mahogany back & sides, 19 fret mahogany neck with rosewood fingerboard, rosewood bridge, 25 1/2" scale, 2" nut width, Takamine TK40 preamp, gold open geared tuning machines with pearloid buttons, gloss natural finish, TKL case (black lining), made in Korea (SN:2854736)
28U-2083
$400.00
|
YAMAHA CG-171SF FLAMENCO (recent)
9 Photos
EC except needs some work, (polish frets, setup, etc. - sold AS-IS), 00-size, solid spruce top, cypress back and sides, gloss natural finish with aging toner, nato neck with rosewood fingerboard, 19 frets, 2.05" nut width, 25.6" scale, rosewood headstock overlay, dark tortoise plastic body binding, mosaic-style top purfling, back strip and rosette, gold tuners with pearloid buttons, clear pickguards, made in Asia (SN:QMZ217104)
28U-2152
$285.00
|
YAMAHA CGX-101 (recent)
13 Photos
EC except needs some work (polish frets, setup, etc. - sold AS-IS), laminated spruce top, black binding on body and neck, nato back and sides, nato neck with rosewood fingerboard, 19 frets, 2-1/16" nut width, 650mm scale, rosewood bridge, multi-color rosette, chrome tuners with pearloid buttons, factory pickup and preamp, natural finish, with SSC (SN:ON0076213)
28U-2150
$195.00
|
Classical Guitars
 other vintage and used categories . . .
|
|
|
|
| 
