VG-EC with some repaired cracks and needs work (reset neck, install bridge plate patch, level and dress frets, strings, setup, etc. - sold AS-IS), 13-5/8" lower bout, all mahogany body, scalloped bracing, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with micro-dot inlays, tortoise plastic pickguard, 1-3/4" nut width, 24.9" scale length, replacement Brazilian rosewood bridge, replacement open-gear Grover tuners with metal buttons, Brazilian rosewood peghead overlay, a great project, with arched-lid OSSC (purple lining) (SN:53741)
10U-4668
$2,400.00
MARTIN 00-18V (2005)
13 Photos
EC-, large dent in top near bass side of fretboard extension, 14-1/4" lower bout, 00-size, Sitka spruce top, scalloped bracing, mahogany back and sides, modified V-shaped 14-fret mahogany neck, 20-fret ebony fingerboard with abalone dot inlays, 1-3/4" nut width, 24.9" scale length, ebony bridge with long saddle, rosewood peghead overlay, tortoise plastic body binding and pickguard, w-b-w-b top purfling, gloss "1935" sunburst finish, Martin open-gear vintage style tuners with butterbean buttons, on consignment, with Martin vintage style OHSC (green lining) (SN:1016467)
10U-4815
$2,000.00
|
MARTIN 00-21 (1952)
14 Photos
VGC+, here's a great player's guitar that has seen many repairs in it's 56 years on this planet (4 repaired top cracks, repaired heel and 2 repaired side cracks, back has been off at some point, some overspray on back, neck reset, new bridge, Mitchel Plate Mate installed and new nut and saddle), 14-1/8" lower bout, spruce top, nice straight grained Brazilian rosewood back and sides, 12-fret mahogany neck with slotted headstock, Brazilian rosewood peghead overlay, engraved Waverly Sloane tuners with ivoroid buttons (originals in case), 20-fret rosewood fingerboard with pearl dot inlays, Brazilian rosewood bridge, tortoise plastic pickguard and body binding, missing endpin, 3-1/4" to 4-1/8" body depth, 24.9" scale, 1-7/8" nut width, with recent Martin Geib-style HSC (cabernet lining), on consignment (SN:132222)
10U-4736
$4,750.00
|
MARTIN 000-16GT (2007)
14 Photos
EC, 15-1/8" lower bout, 3-1/4" to 4" body depth, all solid woods, scalloped bracing, gloss finished spruce top, satin finished mahogany back and sides, 14-fret mahogany neck, 20-fret black micarta fingerboard with pearl dot inlays, black micarta bridge, 1-11/16" nut width, 25.4" scale, rosewood peghead overlay, tortoise plastic pickguard, black-bound body, herringbone soundhole rosette, chrome tuners, with flat lid wooden OHSC (green lining), (SN:1239431)
10U-4820
on hold...$735.00
|
MARTIN 000-18 (1944)
14 Photos
VG-EC, 000-size, 15-1/4" lower bout, spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 24.9" scale, Brazilan rosewood bridge (bridge plate patch added), tortoise plastic pickguard and body binding, replacement nickel Waverly tuners with ivoroid-buttons (original tuners included), Brazilian rosewood headstock overlay, neck has been reset, fingerboard has been refretted, essentially all original and crack free, this guitar has a great vibe along with fine sound, with period brown HSC (purple lining) (SN:88296)
10U-4679
$13,000.00
|
MARTIN 000-M (2006)
14 Photos
EC, satin natural finish, solid spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with dot inlays, rosewood bridge, rosewood peghead overlay, 15-1/8" lower bout, 3-3/16" to 4" body depth, 1-11/16" nut width, 25.4" scale, herringbone soundhole rosette, tortoise plastic pickguard, black-bound body, chrome tuners, with flat lid wooden OHSC (green lining), on consignment (SN:1129131)
10U-4806
$600.00
|
MARTIN BACKPACKER
9 Photos
EC travel guitar, solid spruce top, solid mahogany sides and back, 15-fret rosewood fingerboard, dot markers, rosewood bridge, passive saddle transducer installed with endpin jack, chrome tuners, natural satin finish, 1-11/16" nut width, 24" scale, built in Mexico, with gigbag (SN:150261)
10U-4829
$175.00
|
MARTIN BACKPACKER (recent)
10 Photos
EC except needs work (install new saddle around, strings, setup, etc. - sold AS-IS), travel guitar, solid spruce top, solid mahogany sides and back, 15-fret rosewood fingerboard, dot markers, rosewood bridge, chrome tuners, natural satin finish, 1-11/16" nut width, 24" scale, built in Mexico, with gigbag (SN:131683)
10U-4793
$115.00
|
MARTIN C-2 CONVERSION (1937)
23 Photos
EC++, lovingly converted to 1930's OM-42 specifications, this conversion was started by Randy Lucas who installed the new Adirondack spruce top and supplied the proper neck blank, the rest of the work was completed by Joe Konkoly of Konkoly guitars (and also Elderly Instruments Repair Shop Manager), completely refinished in nitrocellulose lacquer, really nice Brazilian rosewood back and sides, 14-fret mahogany neck, 42-Style snowflake inlays in 20-fret ebony fingerboard, ivoroid-bound body, fretboard and headstock, abalone top purfling and soundhole rosette, small tortoise plastic pickguard (under finish), ebony bridge with long saddle, ivory nut and saddle, Brazilian rosewood headstock overlay with block C.F. Martin inlay, gold Gotoh tuners with butterbean buttons, 15-1/4" lower bout, 25.4" scale, 1-25/32" nut width, 3-1/4" to 4" body depth, very nice guitar that sounds great too! With recent Martin Geib-style HSC (green lining), on consignment (SN:66020)
10U-4762
$8,500.00
|
MARTIN CEO-4R (2006)
12 Photos
EC-, #352 of Special Edition, D-size with sloped shoulders, all solid woods, sunburst finished Adirondack spruce top, scalloped bracing, Indian rosewood sides and back, 14-fret modified low oval mahogany neck, 20-fret black micarta fingerboard with pearl dot inlays, black micarta bridge, white-bound body, b-w-b-w-b soundhole rosette, black pickguard, rosewood peghead overlay, gold tuners, 16-1/4" lower bout, 3-3/4" to 4-7/8" body depth, 25.4" scale, 1-11/16" nut width, inside label signed by C.F. Martin IV, sharp guitar! With Geib-style OHSC (cabernet lining) (SN:1179388)
10U-4595
$1,785.00
|
MARTIN CONCEPT III (2003)
13 Photos
EC, 000 size, black Firemist finish, solid spruce top, solid maple back and sides, 14 fret mahogany neck, 20 fret micarta fingerboard without dots, micarta bridge, black tuners, no pickguard, 1-11/16" nut width, 25.4" scale length, factory Fishman Prefix Stereo Blender installed, made in USA, with OHSC (SN:918328)
10U-4389
$1,675.00
|
MARTIN D-16 H 93 (1994)
13 Photos
VG-EC with touchup throughout, D-size, 15-11/16" lower bout, gloss natural finish, spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with slotted diamond inlays, 1-11/16" nut width, 25.4" scale length, rosewood bridge with slotted diamond inlays, tortoise plastic pickguard, tortoise plastic body binding, herringbone rosette and backstrip, repaired and reinforced crack in side near neck block, Taylor style endpin installed, chrome tuners with ebony buttons, with OHSC (blue lining) (SN:539279)
10U-4786
$985.00
|
MARTIN D-16A (1988)
14 Photos
EC-, D-size, figured ash back and sides, spruce top, 20 fret rosewood fretboard, dot inlays, 1-11/16" nut width, 25.4" scale, scalloped braces, tortoise plastic bound top and back, rosewood bridge, black pickguard, chrome Grover Rotomatic tuners, limited production (1 of 818 made between 1987-1990), with black HSC (maroon lining) (SN:482673)
10U-4778
$1,250.00
|
MARTIN D-18 (1942)
14 Photos
EC except a few well-hidden cracks (see below), 15-3/4" lower bout, Adirondack spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard, pearl dot inlays, 1-11/16" nut width, 25.4" scale, replacement ebony bridge, back, sides and neck refinished (looks like Martin factory work - several repaired cracks on back and one on side are under the newer finish), tortoise plastic pickguard and body binding, nickel Grover tuners with butterbean buttons, recent neck reset by our shop, part of inner edge of soundhole replaced (excellent - appears to be factory work), great, loud, balanced prewar sound, with later HSC (blue lining) (SN:80198)
10U-4560
$18,500.00
|
MARTIN D-18GE GOLDEN ERA (2007)
14 Photos
EC- except for small repaired area of top center seam (very hard to see), Special Edition based on a 1934 D-18, Adirondack (red) spruce top, scalloped bracing and forward shifted X-brace, mahogany back and sides with internal cloth reinforcement strips on sides, 14-fret modified V-shaped mahogany neck, 20-fret ebony fingerboard with abalone dot inlays, 1-3/4" nut width, 25.4" scale, 15-5/8" lower bout, ebony bridge with long saddle, tortoise plastic pickguard, black-bound body, rosewood peghead overlay with old-style decal logo, Waverly tuners with butterbean buttons, with OHSC (Cabernet lining) (SN:1198057)
10U-4798
$2,250.00
|
MARTIN D-18VS CUSTOM (2006)
14 Photos
EC, custom amberburst finished Adirondack spruce top, natural finished mahogany back and sides, 12-fret mahogany neck with slotted headstock, 19-fret ebony fingerboard, abalone dot inlays, 1-3/4" nut width, 25.4" scale, ebony bridge with long saddle, tortoise plastic pickguard and body binding, b-w-b-w top purfling, rosewood headstock overlay, nickel Waverly tuners with butterbean buttons, with Geib-style OHSC (burgundy lining) (SN:1184243)
10U-4803
$2,485.00
|
MARTIN D-21 (1956)
15 Photos
VG-EC with one repaired top crack, D-size, 15-3/4" lower bout, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, Brazilian rosewood bridge, two tortoise plastic pickguards (bass side added), tortoise plastic body binding, Brazilian rosewood peghead overlay, Kluson Deluxe tuners, recent neck reset by our shop, fine sound, "J751403" carved into heel and top of headstock, on consignment, with newer thermoplastic HSC (rust lining) - price reduced (SN:150874)
10U-4571
$5,800.00
|
MARTIN D-21 (1969)
12 Photos
EC-, D-size, 15-3/4" lower bout, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, Brazilian rosewood bridge, replacement Greven Tor-tis pickguard, black body binding (reglued on back treble side), Brazilian rosewood peghead overlay, chrome Grover Rotomatic "PAT. PEND. U.S.A." tuners, Taylor endpin installed, fine sound, neck has been reset, on consignment, with OHSC (green lining) - price reduced (SN:246919)
10U-4643
$5,500.00
|
MARTIN D-28 (1941)
14 Photos
EC-, professionally refinished (we're told it was done by Martin in the 1970's -- they also replaced the bridge, pickguard, did a neck reset and installed a rosewood bridge plate), beautiful quartersawn Brazilian rosewood sides and back, red spruce top with scalloped bracing, herringbone top purfling, ivoroid-bound body, slotted diamond inlays in 20-fret ebony fingerboard, original closed-back Grover tuners with butterbean buttons, 1-11/16" nut width, 25.4" scale, 15-3/4" lower bout, 3-7/8" to 4-7/8" body depth, really nice sounding pre-war D-28, with newer HSC (purple lining), on consignment (SN:77778)
10U-4783
$40,000.00
|
MARTIN D-28 (1944)
23 Photos
VGC+, here's a great player's guitar that has been used but not abused, it has several repaired top cracks, a new bridge and maple bridge plate, is refinished, but most importantly has a great BIG sound! Spruce top with scalloped bracing and herringbone top purfling, nice straight-grained Brazilian rosewood back and sides, ivoroid-bound body, 20-fret ebony fingerboard with slotted diamond inlays, tortoise plastic pickguard, Brazilian rosewood peghead overlay, riveted nickel open-gear tuners with white buttons (one replaced button), 15-3/4" lower bout, 25.4" scale, 1-11/16" nut width, 3-7/8" to 4-7/8" body depth, this guitar's action is geared towards the player that likes a bit higher action (4/32" at bass side and 3/32" on treble side at 12th fret, would require a neck reset to set up with lower action), very cool guitar! With import HSC (black lining), on consignment (SN:89357)
10U-4795
$30,000.00
|
MARTIN D-28 (1980)
14 Photos
VG-EC, D-size, spruce top, Indian rosewood sides and back, 14-fret mahogany neck, 20-fret ebony fretboard with pearl dot inlays, ebony bridge, rosewood peghead overlay, 1-11/16" nut width, 25.4" scale, 15-5/8" lower bout, 3-7/8" to 4-7/8" body depth, replacement tortoise plastic pickguard, chrome tuners, white-bound body, b-w-b-w-b top purfling, b-w back purfling, bone nut and saddle, Fishman Matrix pickup installed, some overspray on body, small amount of finish touch up on neck, neck has been reset at some point and the bridge reglued, pre-truss rod era, sounds good! With black thermoplastic OHSC (rust color lining), on consignment (SN:427392)
10U-4791
$1,850.00
|
MARTIN D-42SB (2007)
14 Photos
EC, Sitka spruce top with 1935 sunburst, scalloped braces (X-brace is 1" below soundhole), rosewood back and sides, low profile neck with 1-11/16" nut width and 25.4" scale length, ivoroid binding, bound ebony fretboard with 45-style snowflake inlay pattern, 45-style bound peghead "CF MARTIN" block letter inlay, gold vintage style tuners with butterbean buttons, snowflakes in ebony bridge, abalone rosette and top purfling including connecting link around fretboard extension as on D-45, tortoise pickguard, bridge pickup and endpin jack installed, with thermoplastic case (SN:1241993)
10U-4773
$3,500.00
|
MARTIN D-42V (1985)
14 Photos
EC except 1 repaired side crack, only 12 of these "Vintage Series" tone machines were built, double bound D (15-5/8") size body, spruce top with aging toner, scalloped braces, abalone top trim and rosette, very nice Brazilian rosewood back and sides, 14-fret V shapped mahogany neck, bound ebony fretboard, fancy star and diamond inlays, 20 frets, ebony bridge with inlays, bound headstock with rosewood overlay and C.F. Martin inlay, Martin / Schaller roto style tuners, tortoise plastic pickguard, label inside signed by C.F. Martin III and IV, big sound, 1-11/16" nut, 25.4" scale, with OHSC, on consignment (SN:455453)
10U-4754
$9,000.00
|
MARTIN D1 (1993)
13 Photos
EC, D-size, satin natural finish, solid spruce top, mahogany sides and solid back, 14-fret mahogany neck, 20-fret rosewood fingerboard, dot inlays, 1-11/16" nut width, 25.4" scale, rosewood bridge, tortoise plastic pickguard and body binding, chrome tuners, on consignment, with thermoplastic OHSC (blue lining) (SN:530531)
10U-4822
$650.00
|
MARTIN DXM (2003)
12 Photos
EC except needs work (fill bridge gap, file fret ends, tighten neck bolt, setup, etc. - sold AS-IS), D-size, synthetic top, back and sides, photo-finish mahogany looking back and sides, 14-fret stratobond neck, 20-fret morado fingerboard , 1-11/16" nut width, 25.4" scale length, morado bridge, tortoise plastic pickguard, chrome tuners, with gigbag (SN:978534)
10U-4722
$295.00
|
MARTIN HD-28S CUSTOM (1995)
16 Photos
EC- with a very small amount of finish off top in front of bridge, gloss natural finish, spruce top with aging toner, scalloped bracing, Indian rosewood back and sides, V-shaped 12-fret mahogany neck with slotted headstock, 19-fret ebony fingerboard with slotted diamond and square inlays, ebony bridge with long saddle, herringbone top purfling, ivoroid-bound body, rosewood peghead overlay, Waverly tuners with butterbean buttons, 15-3/8" lower bout, 25.4" scale, 1-3/4" nut width, 4" to 4-7/8" body depth, neck block stamped "CUSTOM / HD-28 S", inside back of guitar stamped "KONRAD ZELLER" twice, replacement pickguard, bridge pins and endpin, similar to HD-28VS, with black thermoplastic OHSC (black lining) (SN:567192)
10U-4763
on hold...$2,250.00
|
MARTIN OM-18GE 1930 (2006)
13 Photos
EC, 000-size (15-1/4" lower bout), Adirondack spruce top and scalloped bracing, "Golden Era" forward shifted X-brace, mahogany sides and back, 14-fret mahogany 30's style V-neck, squared headstock with Brazilian rosewood overlay (no logo), 20-fret ebony fingerboard with abalone dot inlays, 1-3/4" nut width, 25.4" scale, ebony bridge with long fossil ivory saddle, ebony nut, replacement open-back vintage style Gotoh tuners with butterbean buttons (original Waverly V-2 banjo style tuners in case), Brazilian rosewood-bound body, w-b-w-b top purfling, tortoise plastic pickguard, inside label signed by C.F. Martin IV, neck block says "CF Martin & Company / EST. 1833 / GOLDEN ERA / OM-18GE 1930 / 1197156" on consignment, with black arched-lid OHSC (cabernet lining) (SN:1197156)
10U-4794
$2,600.00
|
MARTIN OM-21 (2003)
13 Photos
EC, 15-1/8" lower bout, gloss natural finish, spruce top, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard, pearl dot inlays, 1-25/32" nut width, 25.4" scale, 3-1/4" to 4" body depth, rosewood bridge, tortoise plastic pickguard and body binding, rosewood peghead overlay, chrome tuners, with upgrade Geib-style OHSC (cabernet lining), on consignment (SN:951459)
10U-4792
on hold...$1,425.00
|
MARTIN OM-21 SPECIAL (2007)
13 Photos
EC+, 000-size body, 15-1/4" lower bout, Sitka spruce top with aging toner and 1/4" scalloped braces, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with abalone cut diamond inlays, 1-3/4" nut width, 25.4" scale length, ebony pyramid bridge with bone saddle, tortoise plastic pickguard, rosewood body binding, fine herringbone rosette and backstrip, rosewood headstock overlay, nickel open-gear tuners, nice guitar with really fine sound, on consignment, with OHSC (cabernet lining) (SN:1250206)
10U-4805
$2,250.00
|
MARTIN OM-28 MARQUIS CUSTOM (2006)
12 Photos
EC, 000 size, cutaway Adirondack spruce top with scalloped 1/4" Adirondack braces, indian rosewood back and sides (with linen reinforcing strips), ivoroid binding, herringbone top trim, 28-style rosette, zigzag backstrip, modified V-shape neck, 25.4" scale, 1 3/4" nut, 2 3/8" string spacing at bridge, ebony fretboard with short pattern diamond and squares inlay, tapered and squared headstock with Golden Era decal on Brazilian rosewood overlay, fossil ivory nut and long saddle, fossil ivory bridge and endpins with black dots, bevelled and polished tortoise pickguard, Martin nickel butterbean gears, Geib style case (rust lining) (SN:1185596)
10U-4770
$3,250.00
|
MARTIN OM-28V (2005)
13 Photos
EC, Vintage Series OM-28, 15-1/4" lower bout, spruce top with aging toner, scalloped bracing and forward shifted X-brace, herringbone top purfling, rosewood back and sides, 14-fret V-shaped mahogany neck, 20-fret ebony fingerboard, slotted diamond inlays, 1-3/4" nut width, 25.4" scale length, 3-1/4" to 4" body depth, ebony bridge with long saddle, small tortoise plastic pickguard, vintage-style Martin tuners with butterbean buttons, old-style decal, fine sound, with Geib-style OHSC (green lining), on consignment (SN:1098278)
10U-4782
$2,200.00
|
MARTIN OMC-28E (2006)
17 Photos
EC+ except side cracks and needs work (repair / touchup major side cracks at lower bout, strings, setup, etc. - sold AS-IS), 15-3/16" lower bout, rounded cutaway, gloss natural finish, spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-3/4" nut width, 25.4" scale length, rosewood peghead overlay, chrome tuners, white-bound body, ebony bridge, black plastic pickguard, with factory Fishman Ellipse Aura pickup, with thermoplastic OHSC (green lining) (SN:1192264)
10U-4706
$1,700.00
|
Martin Guitars
 other vintage and used categories . . .
|
|
|
|
| 
