Vintage & Used Instruments - Elderly Instruments

Home

Sale

Events

Shop by Brand

What's New

Cart

contact us.. showroom info get catalogs	\| help / policies \| email lists \| gift certificates
toll-free in USA 888-473-5810

As-IS Martin Guitars
As-IS Violin Family Instruments
As-IS Amplifiers
As-IS Hammered Dulimers
As-IS Accordions
As-IS Autoharps
As-IS Ukuleles
As-IS Lap and Pedal Steels
As-IS Miscellaneous Instruments
As-IS Flat-top Guitars
As-IS Left Handed Flat-top Guitars
As-IS 12 String Guitars
As-IS Classical Guitars
As-IS Solid Body Electric Guitars
As-IS Hollow Body Electric Guitars
As-IS Archtop Acoustic Guitars
As-IS Resonator & Hawaiian Guitars
As-IS Electric Basses
As-IS Left Handed Electric Basses
As-IS Open Back Banjos (5-string)
As-IS Resonator Back Banjos (5-string)
As-IS Tenor/Plectrum Instruments
As-IS Mandolin Family Instruments

MARTIN BACKPACKER (1990's) 11 Photos

EC- except could use work (fix crack in bridge, fill bridge, glue two loose back braces, heat press neck, restring, set up etc. - sold AS-IS), travel guitar, solid spruce top, solid mahogany sides and back, 15-fret rosewood fingerboard, dot markers, rosewood bridge, chrome tuners, satin natural finish, 1-11/16" nut width, 24" scale, doesn't play too bad as it is, built in Mexico, with gigbag (SN:8418)
10U-4908 $99.00

MARTIN D-18 (1969) 14 Photos

EC- except needs work (reset neck, refret to straighten neck, reglue pickguard, glue top crack, install new strap button, strings, setup. etc. - sold AS-IS), 15-3/4" lower bout, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 25.4" scale length, Brazilian rosewood bridge, black body binding, black plastic pickguard, Brazilian rosewood peghead overlay, chrome Grover Rotomatic tuners read "PAT.PEND. U.S.A.", Barcus-Berry 1/4" endpin jack installed (no pickup), with HSC (black lining) (SN:255541)
10U-4889 $2,200.00

MARTIN 00-17 (1936) 11 Photos

VG-EC except needs some work (dress frets, probably reset neck, recut saddle slot and make new saddle or possibly replace bridge as the wings are a bit thin, clean, setup, etc. - sold AS-IS), 14-1/4" lower bout, no cracks and only minor nicks and dings for such a great old guitar, natural finish, all solid mahogany construction, scalloped bracing, 14-fret neck, 20-fret Brazilian rosewood fingerboard (some sizable finger dents from the 6th fret down), ivoroid dot inlays, 1-3/4" nut width, 24.9" scale, Brazilian rosewood bridge, tortoise plastic pickguard, replacement 1970's (with the rectangular metal buttons) nickel Grover tuners, overall a very clean vintage instrument that with a bit of TLC will be a very sweet sounding little guitar!!! (SN:63441)
10U-4930 $2,650.00

MARTIN OMC-28E (2006) 17 Photos

EC+ except side cracks and needs work (repair / touchup major side cracks at lower bout, strings, setup, etc. - sold AS-IS), 15-3/16" lower bout, rounded cutaway, gloss natural finish, spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-3/4" nut width, 25.4" scale length, rosewood peghead overlay, chrome tuners, white-bound body, ebony bridge, black plastic pickguard, with factory Fishman Ellipse Aura pickup, with thermoplastic OHSC (green lining) (SN:1192264)
10U-4706 $1,700.00

MARTIN 00-17 (1957) 15 Photos

VGC with several top cracks and needs work (reset neck, repair open top cracks, dress frets, restring and set up, etc. - sold AS-IS), solid mahogany top back and sides (large spot of missing finish on top), 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard (refretted, replacement dots), rectangular rosewood bridge, Brazilian rosewood peghead overlay, individual tuners with white buttons (two tuner screws replaced), tortoise plastic pickguard, simple rosette, 14-3/8" lower bout, 24.9" scale, 1-21/32" nut width, 3-1/4" to 4" body depth, lots of potential here, with semi-HSC (burgundy lining) (SN:156096)
10U-4760 $1,485.00

MARTIN 1-26 (1891) 12 Photos

VGC except several side cracks, repaired headstock and needs much work (bridge missing - make and install pyramid bridge, repair several side cracks, replace several spots of missing ivory back binding, replace missing tuner button, dress frets, remove archtop tailpiece, remove nut and bolt in headstock and touch up repair as needed, possible neck reset, etc. - sold AS-IS), Brazilian rosewood sides and back, 12-3/4" lower bout, 24-7/8" scale length, 1-29/32" nut width, ebony fretboard with no inlays, slotted headstock, 12 fret neck, brass 3-in-a-line tuners with ivory buttons (one button missing and one has been repaired), bar frets, ivory-bound top and back, b-w checkerboard top trim - just like a 1-28 except for the top trim, strung with nylon strings, top date 12/91, rare model, with later HSC (outside has been recovered, purple interior) (SN: )
10U-4713 $2,000.00

Violin Family Instruments

1/4 NO LABEL CHINESE 6 Photos

VGC except needs work (needs new bridge and strings, open seams, etc.), sold in AS-IS condition, ok student instrument, with shaped HSC
110U-4846 $45.00

STRAD LABEL 9 Photos

G-VGC except needs work (open seams, needs all new set up, could use new pegs, fingerboard not ebony, etc.) sold in AS-IS condition, German, circa 1910-20's, lightly flamed two piece back, shaded amber-orange varnish, with beater case
110U-5359 $60.00

LEWIS & SON 7 Photos

G-VGC except needs work (poor repair on top under tailpiece, slightly low neck angle, is set up and plays but could use better set up, etc.), sold in AS-IS condition, German, circa 1950-60's, model 125, ok student instrument, with older shaped HSC (SN:125)
110U-5267 $95.00

JULIUS LOTHAN (1971) 9 Photos

G-VGC except needs work (open seams, fingerboard and pegs fit poorly, is set up and plays but could use new set up, etc.), sold in AS-IS condition, labeled as #15, Minneapolis, with signature, plain two piece back, yellow-brown varnish, top has some paint/dirt on it that may clean off, sounds ok, with case
110U-5323 $125.00

GLAESEL V130 5 Photos

G-VGC except needs work (low neck angle, poorly repaired top cracks, is set up and plays ok but could use better set up, etc.), sold in AS-IS condition, recent German work, two piece back of faint narrow curl, orange varnish, with case
110U-5138 $140.00

ANTON SCHUSTER 3/4 BASS 11 Photos

VGC+ except unsightly heel repair, sunburst finish, laminated construction, maple neck, stained pearwood fingerboard, built in Germany, newer tuners, adjustable bridge and endpin, sold AS-IS (needs extreamly high action addressed, heel reinforced, general clean up, set up, etc), 1-1/2" nut, 39-3/4" scale
110U-4650 $800.00

3/4 JTL MEDIO FINO 8 Photos

G-VGC except needs work (treble ribs loose from blocks, needs new nut and set up, etc.), sold in AS-IS condition, French, circa 1910-20's, Strad model, plain two piece back, red varnish, scratched on purfling, will be a good student instrument
110U-5269 $90.00

3/4 CARINA 6 Photos

G-VGC except needs work (needs a-peg hole bushed and peg refit, needs all new set up, etc.), sold in AS-IS condition, newer Chinese, plain two piece back, shaded varnish, with case
110U-5101 $50.00

Amplifiers All amps are as described, major modifications (speakers, etc.) will be noted. Minor modifications may be present unless noted otherwise. Unless specified, a cover and/or foot pedal are NOT included.

ROSS RE-112-HS SPEAKER (1970's) 2 Photos

VG except needs some work (replace hi-frequency horn, remount upside down handle, replace missing stand mount, etc. - sold AS-IS), 1x12" and horn full range speaker cabinet, built in crossover, black epoxy-type finish on cabinet, Pyle 12" speaker replaces Fane original blown piezo horn* Sorry, we no longer ship used amps. In-store sales only! * (SN:1364)
130U-8439 $50.00

PIGNOSE HOG 20 (1990's)

VGC except it needs work (battery no longer holds charge, only operates on AC adaptor, clean pots, jacks, etc. - sold AS-IS), 1X8 - 10 watt combo, 3 band EQ, with AC adaptor, works fine on AC * Sorry, we no longer ship used amps. In-store sales only! * (SN:1045019)
130U-8285 $50.00

PEAVEY 400 SERIES BASS (c.1976) 2 Photos

VGC, 200 watt bass head, dual channels, 6 band EQ and fuzz on channel 1, 3 band EQ and Slope control on channels 2, 2 inputs per channel plus parallel and series inputs to use both channels at once, master volume, sold AS-IS (scratchy pots, etc.), LOUD * Sorry, we no longer ship used amps. In-store sales only! *
130U-8498 $125.00
As-IS Martin Guitars
As-IS Violin Family Instruments
As-IS Amplifiers
As-IS Hammered Dulimers
As-IS Accordions
As-IS Autoharps
As-IS Ukuleles
As-IS Lap and Pedal Steels
As-IS Miscellaneous Instruments
As-IS Flat-top Guitars
As-IS Left Handed Flat-top Guitars
As-IS 12 String Guitars
As-IS Classical Guitars
As-IS Solid Body Electric Guitars
As-IS Hollow Body Electric Guitars
As-IS Archtop Acoustic Guitars
As-IS Resonator & Hawaiian Guitars
As-IS Electric Basses
As-IS Left Handed Electric Basses
As-IS Open Back Banjos (5-string)
As-IS Resonator Back Banjos (5-string)
As-IS Tenor/Plectrum Instruments
As-IS Mandolin Family Instruments

Hammered Dulimers

LOST VALLEY HAMMERED DULCIMER (1987) 8 Photos

EC except needs some minor work (clean, tune, etc. - sold AS-IS), satin finish, cherry sides, maple pins block, mahogany soundboard with butterfly wing soundholes, 26 string courses, laminated wooden handle and bridges, with folding stand up playing stand and 2 sets of hammers, made in Montague, Michigan by Curt Sanders and Linda Foley, with rough condition gigbag (torn and modified by previous owner) (SN:321)
155U-138 $425.00

Accordions

VARSITY KEYBOARD ACCORDION 6 Photos

EC, red pearloid plastic covering with white front and back panels, 3-1/3 octave keyboard (white and red keys), 4 treble stops, 120 bass buttons, built in Italy, sold AS-IS (bellows are a little leaky, right hand reeds need attention, etc.), still works pretty well, with straps and HSC
160U-409 $145.00

SCANDOLIA KEYBOARD ACCORDION 6 Photos

EC, white pearloid plastic covering with red front grill and back pannel, 3-1/3 octave keyboard (white and red keys), 2 treble stops, 120 bass buttons, built in Italy, sold AS-IS (right hand reeds need attention, etc.), with a little work this will be a nice instrument, with strap and HSC (SN:603)
160U-404 $125.00

NOBLE DELUXE GRAND KEYBOARD ACCORDION 8 Photos

EC, white pearloid plastic covering with red front and back pannels, 3-1/3 octave keyboard (white and red keys), 4 treble stops, 120 bass buttons, built in Italy, sold AS-IS (bellows are a little leaky and need attention, etc.), still sounds really nice, with straps and HSC
160U-410 $195.00

HOHNER CLUB III BS BUTTON ACCORDION 8 Photos

VG-EC, red swirl plastic covering, keys of C & F, 3 rows (30 in all) of treble buttons, 8 bass buttons, good for Tex-Mex and other styles, sold AS-IS (reed blocks are leaky, need to be re-glued, clean up, etc.), with straps and HSC (SN:830)
160U-406 $250.00

CAPRI KEYBOARD ACCORDION w/ PICKUP SYSTEM 6 Photos

EC-, white pearloid plastic covering with gold front grill and black back pannels, 3-1/3 octave keyboard (white and gold keys), 3 treble stops, 120 bass buttons, 2 bass stops, factory pickup system, built in Italy, sold AS-IS (pickups are out of alignment and need attention, etc.), still a nice instrument, with straps and HSC (SN:24443)
160U-403 $195.00

Autoharps

SILVERTONE AUTOHARP BY OSCAR SCHMIDT (1970s?) 6 Photos

EC- except needs work (reglue and reinforce pin block - which is severely pulling up - clean strings, retune, etc. - sold AS-IS), 15 bars, brown painted sides and gray painted top, made for Sears (SN:56893)
165U-175 $75.00

Ukuleles

EMENEE FLAMINGO SOPRANO UKULELE (1950's) 12 Photos

VG-EC except could use strings and action slightly high (sold AS-IS), white plastic top, tortoise swirl plastic body, neck and fingerboard (with 12 integral frets and diamond and dot inlays), 1-7/16" nut width, 13-3/4" scale, headstock etched "FLAMINGO" with Hawaiian scene, built-in pitchpipe on headstock, mechanical friction tuners, with cool original box ('50's graphics with illustration of Arthur Godfrey playing for some kids - box is worn and torn in some spots), includes "SNAP-ON Arthur godfrey UKE PLAYER" attachment (needs rubber bands)
180U-770 $100.00

KAMAKA HF-1 SOPRANO UKULELE 11 Photos

VGC except needs some work (clean, repair open top crack, re-do poorly done crack repairs, glue loose frets, setup, etc. - sold AS-IS), 6-3/4" lower bout, all solid koa construction, round soundhole, 12 frets, koa fingerboard and bridge, 1-3/8" nut width, 13-5/8" scale, mechanical friction pegs with white plastic buttons, finish delaminating on front and back (looks like too much moisture in wood), made in Hawaii, with SSC (black lining)
180U-779 $250.00

HARMONY SOPRANO UKULELE (1930's) 8 Photos

VGC+, dark natural satin finish, 6-3/8" all birch body, 1 piece birch neck, dot inlays, 12 frets, cool tropic canoe scene on top (same scene as on the latter Green Canoe model), wooden friction pegs, sold AS-IS (needs open seam repair, fret work, strings, set up, etc.), 1-7/16" nut, 13" scale, price reduced
180U-654 $90.00

GIBSON UKE-2 SOPRANO UKULELE (1930's) 16 Photos

VGC+ except refinished, bass side has a small repair (replaced piece of mahogany) and needs much work (glue one back crack, glue loose back brace, glue loose top braces, glue several top cracks, clean restring and set up, etc. - sold AS-IS), all solid mahogany body and neck, w-b-w-bound top, 17-fret rosewood fingerboard, dots on 5th, 7th and 10th frets, 1-7/16" nut width, 13-3/4" scale, 6-1/4" lower bout, ~2-1/8" body depth, silkscreened "The Gibson" script logo, rope-style rosette, 4 mechanical friction tuners with black plastic buttons, missing logo, with period end-loading SSC (may be original?)
180U-741 $385.00

FLAMINGO SOPRANO UKULELE (1950's) 8 Photos

EC- except needs very minor work (clean, strings, etc. - sold AS-IS), all plastic instrument, 6-1/4 body, white top and headstock, tortoise swirl back, sides, neck and fingerboard, dot markers, 12 integrated frets, 1-7/16" nut width, 13-3/4" scale length, hula scene on headstock, friction tuners, very cool! Price reduced
180U-559 $125.00

KOLOA KU-650 BARITONE UKULELE (recent) 11 Photos

EC- except needs minor work (polish frets, strings, setup, etc. - sold AS-IS), gloss natural finish, solid mahogany body, 14-fret mahogany neck, 19-fret ebony fingerboard, 1-1/2" nut width, 20-1/4" scale length, rosewood bridge, chrome sealed tuners, made in China, with black gigbag
180U-788 $110.00

EMENEE FLAMINGO SOPRANO UKULELE (1950's) 10 Photos

EC- except large back crack, 3" of top separation from body, and needs other minor work (clean, strings, etc. - sold AS-IS), all plastic instrument, 6-1/4" body, white top and headstock, tortoise swirl back, sides, neck and fingerboard, bowtie markers, 12 molded plastic frets, 1-7/16" nut width, 13-3/4" scale length, hula scene on headstock, friction tuners, with Arthur Godfrey Uke Player chord attachment, built-in pitchpipe, original cardboard case (some cellophane tape corner reinforcement) with wonderful period graphics depicting TV/radio star Arthur Godfrey, price reduced
180U-561 $50.00

NO NAME SOPRANO UKULELE (c.1930) 11 Photos

VGC except refinished and needs work (glue two back cracks, glue one top crack, fill gap at neck heel, dress frets, clean, restring and set up etc. - sold AS-IS), round body, 6-3/8" diameter, mahogany neck, 17 frets, white-bound body and round soundhole, Northwest totem decals on top and front of headstock, ~13" scale, 1-3/16" nut width, ~2-1/4" body depth, nice wallhanger or labor of love project! with end-loading canvas bag
180U-740 $65.00

MARTIN T-15 TIPLE (1952) 14 Photos

VG-EC except except needs much work (reglue bridge, replace missing piece of headstock overlay, glue headstock crack at top of treble side slot, cut down bridge and replace saddle, replace missing endpin, repair two back cracks, dress frets, setup, etc. - sold AS-IS), natural finish, all mahogany construction, 12-fret mahogany neck with slotted headstock, 18-fret rosewood fingerboard, ivoroid dot inlays, ivoroid-b-i soundhole ring, 1-1/2" nut width, 17" scale, rosewood bridge, 5-on-a-plate tuners with white plastic buttons, lots of potential for the right person (SN:123772)
180U-812 $785.00

MARTIN STYLE O SOPRANO UKULELE (1950's) 11 Photos

VGC+ with one repaired top crack and needs some work (reglue one side of top brace, setup, etc. - sold AS-IS), all mahogany body and neck, 6-5/16" lower bout, 12-fret Brazilian rosewood fingerboard with micro-dot inlays, 1-7/16" nut width, 13-5/8" scale length, mechanical friction tuners with white plastic buttons, some finish touchup and possible overspray on top only, with canvas carrying bag
180U-784 $395.00

MARTIN 1-T TENOR UKULELE (c.1950) 10 Photos

EC- except needs some work (repair side cracks, reglue back brace end, dress frets, clean, setup, etc. - sold AS-IS), 9" lower bout, all mahogany body, 12-fret mahogany neck, 18-fret Brazilian rosewood fingerboard, 1-5/16" nut width, 17" scale, rosewood bridge, tortoise plastic top and back binding, ivoroid-black top purfling, i-b-i soundhole ring, mechanical friction tuners with black plastic buttons
180U-728 $875.00

Lap and Pedal Steels

BRONSON MELODY KING MODEL 52 LAP STEEL GUITAR (c.1950) 10 Photos

VG-EC except needs work (rewind pickup, clean pots, strings, etc. - sold AS-IS), brown bakelite body with 5 gold cavity covers on top, 2 brown radio type control knobs on same side, metal swivel cover plate on headstock with large metal badge on front, 23 molded frets outlined in white, white dot markers (missing dots at frets 7 and 14), 1-9/32" nut width, 22-1/2" scale length, gold Kluson Deluxe 3-on-a-plate tuners, super cool, made by Rickenbacker - similar to model BD
185U-373 $1,050.00

Miscellaneous Instruments

FENDER BG29 ACOUSTIC/ELECTRIC BASS GUITAR (1998) 11 Photos

EC- except needs minor work (dress frets, reglue bridge, setup, etc. - sold AS-IS), natural satin finish, 15-3/4" lower bout, soft cutaway, spruce top, mahogany back, sides and neck, 20-fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 29-7/8" nut, rosewood pinless bridge, Fishman pickup / preamp system, modern roto style tuners, built in Korea, with gigbag (SN:98052147)
200U-1423 $295.00

DEAN PERFORMER CE NS ACOUSTIC-ELECTRIC BASS (2002) 15 Photos

EC except could use work (file last 7 frets down or pull last 7 frets, plane fingerboard and refret, restring and set up, etc. - sold AS-IS), satin natural finish, acoustic-electric, rounded cutaway, spruce top, mahogany back and sides, mahogany neck joins body at the 15th fret, black-bound 22-fret rosewood fingerboard with dot inlays, rosewood bridge, chrome tuners, abalone soundhole rosette, white-bound body, b-w-b-w-b-w top purfling, factory Dean EQ7545 pickup system, 17-1/8" lower bout, ~32-1/8" scale, 1-21/32" nut width, 3-7/8" to 4-7/8" body depth, built in Korea, with flat lid TKL HSC (gray lining) (SN:02112166)
200U-1381 $225.00

BEAT STICK (1950's) 5 Photos

VGC, large tear in the nylon (?) head and missing jingles that sit on the wooden platform at the top (sold AS-IS), this is a rhythm toy instrument (marketed by Sears Roebuck) with jingles, ~7-1/2" nylon (?) drum head on a wood shell with red and white metal outer covering, with rope running the length of the toy. all mounted on a 43" long red stick with rubber covering on both ends, cool '50's kind of graphic on the head shows a young man playing a beat stick with dancing couples and musical notes. "MFG BY NOBEL & COOLEY CO. / GRANVILLE, MASS."
200U-940 $15.00

AMPEG BB-4 BABY BASS (1960's) 9 Photos

VG-EC except needs minor work (adjust neck angle, clean, dress fingerboard, setup, etc. - sold AS-IS), small body, 41" scale standup bass, semi-solid body with synthetic wood-grain exterior, sunburst finish, maple neck with ebony fingerboard, adjustable endpin, scroll headstock, decal logo on headstock, factory pickup, 1 volume and 1 tone control, appears to be all original, early model before the "Ampeg" tailpiece, with rough padded carrying bag (broken zippers, some tears) (SN:00100)
200U-1364 $2,150.00

STEFAN WEISS HURDY GURDY (1990's) 12 Photos

EC but needs some work (replace missing strings, set up, etc. - sold AS-IS), one small repaired side crack, handcrafted in Austria, 7-string chromatic instrument, currently has 5 strings (3 drones and 2 melody), gamba style body with carved spruce top and hardwood (cherry?) sides and back, decorative ebony pegs, cutout scroll, inlaid cherry(?)-top key box, unusual decorative soundholes, ~ 33" long (without crank), ~ 11" lower bout, with OHSC,
200U-1282 $2,375.00

MICHAEL KELLY DRAGONFLY 4TBK (recent) 13 Photos

EC+ except needs minor work (replace or shim saddle, change to acoustic strings, setup, etc. - sold AS-IS), 4-string, 34" scale, jumbo body with soft cutaway, 16-5/8" lower bout, 5-1/8" body depth, highly figured quilted maple laminate top, back and sides, transparent gloss black finish, white-bound rosewood fingerboard with deluxe vine inlay, 22 frets, 1-11/16" nut width, 34" scale, white bound body and headstock, abalone rosette, factory Fishman MKAB pickup system with on-board EQ, chrome hardware, made in China, with gigbag (SN:06030387)
200U-1411 $400.00

MARTIN OOC-16GTAE BASS GUITAR (2007) 15 Photos

EC+ except needs repair (glue and cleat 2 large side cracks, touch-up finish, setup, etc. - sold AS-IS) thin 00-size cutaway body with satin finished solid mahogany sides and back, gloss finish solid spruce top, Fishman Prefix Pro system, rosewood fingerboard with only side dots, 1.58" nut, 34" scale, ~3-1/4" to ~2-3/8" body depth, black body binding, black chrome tuners, with OHSC (green lining) (SN:1219638)
200U-1309 $650.00

FOLKCRAFT HIGHLAND JR LAP HARP (1995) 6 Photos

VG-EC except needs some minor work (restring, missing lowest string and all are old, reglue small loose veneer spot, setup, etc., - sold AS-IS), model, 27 strings, 3-1/2 octave range (C below mid-C to third A above), with sharping levers on all "F's" & "C"s". Solid cherry with spruce soundboard, 46" tall, removable feet, form fitting padded bag (SN:279)
200U-1336 $600.00

FRANZ SCHWARZER CONCERT ZITHER (c.1900) 12 Photos

PC, needs much work (compete restoration, including removal of back to repair delaminations, cracks and loose braces, various minor exterior repairs, new strings, etc. - sold AS-IS), 33 strings, 29 frets, dot inlays,figure maple (or ash or ????) veneered back and top with oval soundhole, multi-ply inlaid soundhole rosette, fancy engraved plate cover for 5 guitar-style tuners (with pearl buttons), ~29" long, 12-1/2" in width and 1-1/2" in depth, built in Washington, Missouri by this noted maker, with cool OHSC (missing handle)
200U-1369 $150.00

Flat-top Guitars

NO NAME GUITAR 12 Photos

PC (bowed neck, warped top, neck joint separating from body, clean and dress frets, needs strings, setup, etc. etc. etc. - sold AS-IS), orange sunburst top, back, and sides with black painted "purfling", slotted headstock, plastic dot inlays, screw-down black pickguard, nothing more than a practice piece for a budding repairperson or to use as a wall decoration, made in Taiwan
20U-12046 $17.50

ALVAREZ AD80SSB (recent) 13 Photos

VG-EC except needs work (dress frets, reglue bridge, setup, etc. - sold AS-IS), D-size, 15-5/8" lower bout, sunburst finish solid spruce top, natural finish rosewood back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard, fancy pearl inlays at 12th fret, 1-23/32" nut width, 25-5/8" scale length, rosewood bridge, black plastic pickguard, pearl rosette and top purfling, white-bound body, fingerboard and headstock, chrome tuners, made in Asia (SN:F305240102)
20U-11873 $250.00

EMENEE "OHIO ART" BOSS GUITAR AMERICA PLASTIC TOY GUITAR (1980'S) 6 Photos

VGC, all plastic construction, red top with injection molded integral bridge, paper label with the "Ohio Art BOSS Guitar America" on it, white body and neck, red fingerboard with 16 integral frets, 1-17/32" nut width, 19" scale, red plastic headstock overlay, plastic tuners missing, made by Emenee Industries of Bryan, Ohio. Not to be confused with a functioning instrument, this is a collectible TOY. Sold AS-IS, price reduced
20U-11157 $15.00

FENDER ESV-10E ENSENADA (recent) 13 Photos

EC- except could use work (dress frets, clean, restring and set up, etc. - sold AS-IS), Fender calls this and Orchestra body, 15-3/4" lower bout, acoustic electric, gloss natural finish, all solid woods, spruce top, Palo Escrito (Mexican rosewood) sides and bookmatched back, 12-fret mahogany neck with slotted headstock, 19-fret ebony fingerboard with abalone dot inlays, rectangular ebony bridge, abalone soundhole rosette, small tortoise plastic pickguard, factory Fishman Ellipse VT pickup system, vintage-style Gotoh tuners with butterbean buttons, 25.5" scale, 1-3/4" nut width, 3-3/4" to 4-3/4" body depth, built in Mexico, with thermoplastic OHSC (black lining) (SN:MAH605042)
20U-11984 $495.00

GIBSON B-25 (1968) 19 Photos

VG-EC with two repaired cracks and needs work (replace missing back brace, reglue loose back braces, glue back end of bridge, level and dress frets, strings, set-up, etc. - sold AS-IS), 14-1/2" lower bout, sunburst finished X-braced spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard, pearl dot inlays, 1-9/16" nut width, 24-3/4" scale, rosewood reverse belly bridge with adjustable saddle, tortoise plastic pickguard, white-bound body, 3-on-a-plate Kluson Deluxe tuners, back and sides appear to be refinished, with SSC (blue lining) (SN:953567)
20U-11858 $825.00

GIBSON BLUERIDGE CUSTOM (1974-75) 15 Photos

VG-EC except needs lots of work (replace one tuner, glue headstock seam, refret to straighten neck, setup, etc. - sold AS-IS), natural finish solid spruce top, rosewood back and sides, 16" lower bout, dark-stained 3-piece maple neck with 20 fret rosewood fretboard, pearl dot inlays, 1-11/16" nut width, 25-1/2" scale, replacement Martin-style ebony bridge, double black-bound body, w-b-w top and back purfling, replacement tortoise plastic pickguard, replacement tuners tuners with metal buttons, repaired end-block crack, tuners have been changed more than once, brown "Wheatland Festival with pine trees" graphic painted on top of guitar in brown paint, trussrod is at maximum adjustment, plugged jackplate hole on side, repaired center seam and treble side cracks, this guitar has had numerous modifications, just needs some TLC, made in Kalamazoo, rough SSC (brown lining) (SN:B002017)
20U-11926 $550.00

GIBSON DOVE CUSTOM (1980) 15 Photos

EC- except needs work (reset neck, level and dress frets, strings, setup, etc. - sold AS-IS), square shouldered D-size, 16" lower bout, gloss natural finished spruce top, cherry finished maple back and sides, 3-piece maple neck, white-bound ebony fingerboard with double parallelogram inlays, 1-23/32" nut width, 25-1/4" scale, rosewood bridge with pearl dove inlays, fancy 4-point engraved pickguard with pearl inlaid dove, white-bound body, Grover Rotomatic tuners, back of headstock stamped "SECOND", made in Kalamazoo, with black Epiphone HSC (blue lining) (SN:80210079)
20U-11840 $1,400.00

GIBSON HARLEY DAVIDSON LIMITED EDITION (1994) 12 Photos

EC except could use work (refret to true and straighten fingerboard, restring and set up, etc. - sold AS-IS), #192 of 1500, gloss black finish, 15-3/4" lower bout, 3-3/4" to 4-5/8" body depth, all solid woods, spruce top, maple back and sides, 14-fret maple neck, white-bound 20-fret ebony fingerboard with pearl shield inlays, 1-23/32" nut width, 24-3/4" scale, ebony belly bridge, dual black pickguards (stenciled "Harley-Davidson"), w-b-w double-bound, body, pearl headstock inlays of Gibson and H-D logos, nickel tuners, 100th Anniversary interior label, these guitars were originally sold at Harley dealerships, with certificate of authenticity, and black wooden OHSC (Harley orange lining) (SN:92294012)
20U-11547 $2,100.00

GIBSON HUMMINGBIRD (1966) 14 Photos

VG-EC with a repaired headstock crack / top crack and needs work (repair top center seam, reglue pickguard, reset neck, level and dress frets, strings, setup, etc. - sold AS-IS), 15-7/8" lower bout, square-shouldered D-shape, sunburst finished spruce top (appears to be oversprayed), cherry stained mahogany back and sides (sides appear to be slightly oversprayed), 14-fret mahogany neck, white-bound 20-fret rosewood fingerboard with pearl dual parallelogram inlays, 1-19/32" nut width, 25-1/2" scale, rosewood reverse belly bridge, plastic pickguard embosed with hummingbird and flower motif, white-bound body, pearl "Gibson" and crown headstock inlays, gold Kluson Deluxe tuners with single ring keystone buttons, with flat-lid HSC (black lining) (SN:405085)
20U-11535 $2,400.00

GIBSON LG-2 (1942-46) 13 Photos

VG-EC except needs work (reglue bridge, glue back center seam, glue pickguard, borderline for neck reset, strings, setup, etc. - sold AS-IS), 14-3/8" lower bout, sunburst finished X-braced spruce top, 14-fret mahogany neck, 19-fret Brazilian rosewood fingerboard with dot inlays, 1-3/4" nut width, 24-7/8" scale, white-bound body, tortoise plastic pickguard, Brazilian rosewood bridge with 2 dots, tortoise plastic pickguard, 3-on-a-plate open-gear riveted tuners with white-plastic buttons, banner headstock logo reads "ONLY A GIBSON IS GOOD ENOUGH", with SSC (blue interior) (SN:2395 12)
20U-11372 $3,500.00

HOHNER ECA800 ECLIPSE (recent) 13 Photos

EC except needs some work (reglue neck lamination behind headstock, setup, etc. - sold AS-IS), grand auditorium bowlback acoustic/electric, solid spruce top, parabolic body of cross-woven spherical alder "Gibbous Echo" soundhole design, maple binding, faux abalone purfling, 3 piece mahogany neck, pearloid ellipses inlays, ebony fingerboard, gold Gotoh tuners with ebony buttons, ANP-41 preamp with eq, presence and an auto-tuner, AA Nubone nut and saddle by Tusq, scale length ~ 25.5", nut width ~ 1-11/16", made in Korea, with molded OHSC (black lining) (SN:SP02G10419)
20U-11965 $485.00

IBANEZ PF105S NT (2003) 10 Photos

EC- except could use minor work (dress frets, clean, restring and set up, etc. - sold AS-IS), Performance Series, gloss natural finish, D-size, solid spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with dot inlays, fancy inlay on 12th fret, rosewood bridge, tortoise plastic pickguard, black-bound body and fretboard, w-b-w-b-w top purfling, large herringbone soundhole rosette, chrome tuners, "PF" on headstock, 15-3/4" lower bout, 25.5" scale, 1-23/32" nut width, 4" to 4-3/4" body depth, built in China (SN:K031101615)
20U-12057 $125.00

KENT (1960's) 10 Photos

FC, funky heel repair and needs much work (new nut, dress frets, reglue several inside braces, new saddle and bridge pins, restring and set up, etc. - sold AS-IS), small body, 13" lower bout, mahogany body construction, ladder braced, 12-fret mahogany neck, black-bound 18-fret rosewood fingerboard, dot inlays, screwed down white pickguard, ~23" scale, 1-3/4" nut width, round yellow inside label (someone has written on it with green marker), "JAPAN" stamped in back of headstock, cool wallhanger!
20U-11297 $15.00

LOPRINZI VR-10 (c.1975) 13 Photos

VG-EC except for repaired side crack on treble lower bout (large cleats) and needs some work (reglue bridge, dress uneven frets, clean, setup, etc. - sold AS-IS), D-size, 14-1/2" lower bout, 3-3/4" to 4-5/8" body depth, solid spruce top, solid rosewood back and sides, 14 fret mahogany neck with ebony fingerboard, 20 frets, pearl dot inlays, Brazilian rosewood headstock overlay with "A. LoPrinzi" decal, rosewood bridge, cream-bound body, black plastic pickguard, gold Grover rotomatic tuners, L.R. Baggs Active Element pickup installed with endpin jack, repaired hole on upper bass bout side from strap button, made in Plainsboro, New Jersey, label signed by T. LoPrinzi, with arched-lid HSC (orange lining) (SN:3360)
20U-12043 $785.00

MAPLE LAKE MODEL 2411 (BY WECHTER) (recent) 16 Photos

EC but needs work (fix hole in treble side lower bout, reseat and dress frets, replace one bridge pin, restring and set up, etc. - sold AS-IS), D-size, gloss natural finish, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with dot inlays, rosewood bridge, tortoise plastic body and fretboard binding, chrome tuners, faux abalone soundhole rosette, 15-3/4" lower bout, 25.5" scale, 1-21/32" nut width, 4" to 4-3/4" body depth, built in China, with nice Wechter gigbag (SN:15797)
20U-11932 $100.00

OVATION CC057 CELEBRITY (recent) 12 Photos

VG-EC except needs work (replace battery, recut bridge slot to lower action, saddle is as low as it can go, etc. - sold AS-IS), acoustic-electric, rounded cutaway, mahogany finish spruce top, super shallow bowl, 14-fret bound mahogany neck, rosewood fretboard, dot and diamond inlays, 20 frets, pinless walnut bridge, chrome tuners, under saddle pickup, built in Korea, 1-11/16" nut, 25-1/2' scale, with gigbag (SN:1113194)
20U-11870 $200.00

TACOMA DM9 (2001) 12 Photos

EC except needs work (glue fingerboard extension, fill back of bridge, level and dress frets, strings, setup, etc. - sold AS-IS), D-size, 15-3/4" lower bout, natural satin finish, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with abalone dot inlays, 1-3/4" nut width, 25-5/8" scale, rosewood bridge, tortoise plastic-bound body and fretboard, clear plastic pickguard, chrome tuners, 4-color herringbone soundhole rosette, with black OHSC (tan lining) (SN:E0990040)
20U-11575 $425.00

TAKAMINE G340SC (2007) 12 Photos

EC- except needs some minor work (new strings, setup, etc. - sold AS-IS), gloss natural finish, solid spruce top, mahogany back and sides, rosewood fretboard and bridge, rounded cutaway, abalone dot inlays and rosette, gold tuners, G Series, 25-1/2" scale, 1-5/8" nut, made in China, with chipboard SSC (SN:07080917)
20U-12063 $210.00

TAYLOR 110 (2006) 12 Photos

EC except needs work (polish frets, lower saddle, strings, set-up, etc. - sold AS-IS), D-size, 15-7/8" lower bout, satin natural finish, solid spruce top, laminated sapele sides and arched back, 14-fret mahogany neck, 20-fret ebony fingerboard with dot inlays, 1-11/16" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, black-bound body, chrome tuners, with Taylor gigbag (SN:20060327805)
20U-11980 $410.00

VENTURA V2 (recent) 15 Photos

EC- except needs some work (dress frets, cut down top of bridge to lower action, setup, etc. - sold AS-IS), D-size body with soft cutaway, natural finish laminated spruce top, nato back and sides, mahogany neck with bound rosewood fingerboard, 20 frets, striped ebony bridge, white bound body with b-w-b-w-b top purfling, bound headstock, gold sealed back tuners, faux abalone rosette, black pickguard, EQ-7545R pickup and preamp system, volume control and 4 tone sliders, 1-11/16" nut width, 25-1/2" scale, made in China, with flat-lid HSC (black lining)
20U-12013 $85.00

WASHBURN D-100MCBL (2000) 13 Photos

EC- except needs some work (dress frets, reglue back of bridge, setup, etc. - sold AS-IS), D-size body, transparent green finish, mahogany top, back and sides, mahogany neck with rosewood fingerboard, dot inlays, 20 frets, black body binding, b-w-b-w top purfling, rosewood bridge, black pickguard, 3-ring rosette, gold sealed back tuners, 1-11/16" nut width, 25-1/2" scale, made in Asia, with gigbag (SN:600110402)
20U-12012 $125.00

WASHBURN EA20SDLK (2007) 12 Photos

EC except could use minor work (restring, minor set up, etc. - sold AS-IS), acoustic-electric, sharp cutaway, gloss natural finish, solid spruce top with oval soundhole, quilted maple back and sides, 14-fret 3-piece maple neck, 21-fret rosewood fingerboard with dot inlays, white-bound body, fretboard and headstock, rosewood bridge, factory B-Band A3T pickup system with built in tuner, 16" lower bout, 3-1/8" to 3-1/2" body depth, 25-5/8" scale, 1-11/16" nut width, abalone soundhole rosette, b-w-b-w-b top purfling, chrome Grover 18-1 Rotomatic tuners with black plastic buttons, built in China, with blue thermoplastic OHSC (black lining, missing end buttons) (SN:G07070045)
20U-11990 $450.00

WECHTER 5713 PARLOR (recent) 12 Photos

EC except needs some minor work (polish frets, setup, etc. - sold AS-IS), parlor size, 13-1/2" lower bout, 3-3/8" to 3-3/4" body depth, gloss natural finished solid spruce top, scalloped braces, satin finished rosewood back and sides, 14 fret nato neck with bound rosewood fingerboard, 20 frets, small dot inlays, ivoroid bound top, back, neck and headstock, b-i-b top purfling, abalone rosette, ebony bridge with compensated saddle, 1.7" nut width, 25-1/2" scale, sealed back tuners with chrome buttons, made in China, with gigbag (SN:17183)
20U-11865 $315.00

WM. B. TILTON PARLOR GUITAR (mid-1800's) 14 Photos

VG-EC except needs work (glue open back seams, redo old repair: reglue & reinforce major side crack, repair broken tailpiece, 5 missing frets, reseat and dress frets, reset neck, repair top crack, remove added cloth fret markers, setup, strings, etc. - sold AS-IS), ladder-braced spruce top, Brazilian rosewood sides and back, 12-fret mahogany neck, 18-fret ebony finberboard, slotted headstock, decorative 3-in-a-line tuners with bone buttons, 1-25/32" nut width, ~24-1/2" scale, replacement (but very cool) decorative metal tailpiece (needs repair), 11-1/2" lower bout, unbound body, b-w-brown-w-b soundhole ring, nickel-silver soundhole medallion engraved "Wm. B. TILTON'S / IMPROVEMENT / Patented March 4 1856 / ZOGBAUM & FAIRCHILD / NEW YORK" is mounted on the longitudinal wooden bar that constitutes the "Improvement", made by John C. Haynes and stamped on back of headstock "John C. Haynes & Co. / Boston", with coffin case (SN:03091)
20U-11855 $1,200.00

YAMAHA APX-7 (1990's) 14 Photos

EC- except needs some work (polish frets, clean electronics, borderline for neck reset, setup, etc. - sold AS-IS), rounded cutaway, black finish, spruce top with oval soundhole, agathis back and sides with synthetic outside coating, 14-fret mahogany neck, 24 fret rosewood fingerboard with dot inlays, composite bridge, white-bound body, fretboard and headstock, b-w-b-w top purfling, black peghead overlay with block "YAMAHA" logo, gold tuners, factory Yamaha pickup system with volume, bass, treble and blend controls, 15-1/8" lower bout, 25.5" scale, 1-11/16" nut width, 3" to 3-3/8" body depth, made in Taiwan, with brown wooden OHSC (burgundy lining) (SN:81028006)
20U-11909 $250.00

Left Handed Flat-top Guitars

TAYLOR 307-GB BIG BABY LH (2002) 14 Photos

EC except needs work (shim neck, dress frets, restring and setup, etc. - sold AS-IS), factory left-handed, 15/16 D-size, 15" lower bout, 3-1/4" to 3-7/8" body depth, satin natural finish, solid spruce top, mahogany sides and arched back, bolt-on mahogany neck, 20-fret ebony fingerboard with white dot inlays, 1-11/16" nut width, 25-1/2" scale, ebony bridge, chrome tuners, tortoise plastic pickguard, with thermoplastic HSC (black lining) (SN:20020415413)
21U-328 $285.00

FENDER DG-16L (2002) 13 Photos

EC except needs some work (dress frets, clean, setup, etc. - sold AS-IS), factory left-handed, dreadnought body, mahogany back and sides, spruce top, rosewood fretboard with snowflake inlays, black gloss finish, 1-11/16" nut width, 25-1/2" scale, rosewood bridge, black plastic pickguard, chrome sealed back tuners, white binding on neck, top and back of body, made in Korea, with HSC (gray lining) (SN:02071820)
21U-325 $150.00

12 String Guitars

DEERING DELUXE 12 BANJO GUITAR (1993) 14 Photos

EC- except needs work (refret to straigten neck and repair maxed truss rod, strings, setup, etc. - sold AS-IS), 12-string guitar neck on banjo rim, mahogany neck and double white-bound resonator, 22-fret ebony fingerboard, pearl dot inlays, 1-15/16" nut width, ~26-1/8" scale length, nickel hardware, one-piece flange, flathead tone ring, dual coordinator rods, black peghead overlay with silkscreened eagle and Deering logo, chrome Grover mini-Rotomatic tuners, with arched-lid HSC (blue lining) (SN:11154193-2928)
26U-1750 $1,900.00

MICHAEL TERRIS 12-STRING (2001) 12 Photos

EC- except needs work (level and dress frets, fill bridge gaps, reglue pickguards, reset neck, strings, setup, etc. - sold AS-IS), D-size, 15-1/2" lower bout, dark vintage sunburst finish, spruce top, rosewood back and sides, 12-fret mahogany neck, 21-fret ebony fingerboard with pearl dot inlays, 1-31/32" nut width, 25-1/2" scale length, rosewood headstock overlay, chrome Grover Deluxe tuners, ebony bridge, two tortoise plastic pickguards, handcrafted in Califon, N.J., interior label signed by Michael Terris, with arched-lid HSC, Sabine AX-2000 tuner attached to sidereduced (SN:121)
26U-1689 $500.00

MARTIN D12-28 (1971) 14 Photos

VG-EC, except needs major repair work (reset neck, replace bridge, repair and touchup top at end of fretboard extension, repair cracked neck block, dress frets, glue loose heel cap, reglue top center seam below bridge, replace case handle, setup, etc. - sold AS-IS), D-size, 15-3/4" lower bout, spruce top, rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with pearl dot inlays, 1-7/8" nut width, 24.9" scale, ebony bridge, white-bound body, black plastic pickguard, chrome Grover tuners, previously repaired headstock crack (pro job), with HSC (gold lining) (SN:292090)
26U-1771 $1,050.00

OVATION 1615 (1979) 11 Photos

EC- except needs major work (repair broken headstock, glue top cracks, dress frets, setup, etc. - sold AS-IS), acoustic-electric, standard depth bowl, solid spruce top, natural gloss finish, 15-5/8" lower bout, 12-fret neck with slotted headstock, 5-piece mahogany and maple neck, 18-fret ebony fingerboard with dot and diamond-shaped inlays, pinless walnut bridge, chrome tuners with pearloid buttons, w-b-w-b-w-b-w-b top purfling, volume control for pickup, 25.4" scale, 1-7/8" nut width, built in the USA (SN:187070)
26U-1788 $185.00

ALVAREZ 2551-12 (1997) 13 Photos

EC except needs some work (dress frets, setup, etc. - sold AS-IS), D-size, 15-3/4" lower bout, solid spruce top, natural finish, rosewood back and sides, 14 fret mahogany neck with bound rosewood fingerboard, 20 frets, pearl diamond inlays, white bound neck, body and headstock, rosewood headstock overlay with pearl logo inlay, rosewood bridge, 12 individual sealed gear tuners with chrome buttons, 1-7/8" nut width, ~25-1/2" scale, made in Asia, with flat-lid HSC (cream lining) (SN:93810)
26U-1803 $365.00

WASHBURN J28S12DL (2006) 13 Photos

EC+ except needs minor work (level and dress frets, strings, set-up, etc. - sold AS-IS), J-size, 16-5/8" lower bout, gloss natural finish, sold spruce top, quilted maple back and sides, 14-fret maple neck, 20-fret rosewood fingerboard with snowflake abalone inlays, 1-29/32" nut width, ~25-3/4" scale length, rosewood bridge, tortoise plastic pickguard, white-bound body, fingerboard and headstock, rosewood headstock overlay, gold Grover 18-1 tuners with ebonite buttons, with thermoplastic OHSC (black lining) (SN:G06042168)
26U-1795 $495.00

VOX TEMPEST XII (c.1965) 12 Photos

EC-, except needs some work (reseat and dress frets, clean, replace spring, switch tip and tremolo arm and repair broken tremolo attachment, setup, etc. - sold AS-IS), fiesta red finish with some nicks, dings and a bit of checking, offset double cutaway body, bolt-on maple neck with bound rosewood fretboard, 22 frets, aluminum string nut, 1-3/4" width at zero fret, 3 single coil pickups, master volume and 2 tone controls (tone controls work backwards as they should on a Vox), 3-way pickup selector, adjustable bridge with 6 saddles, 12 covered back "VOX" tuners with metal buttons, 6 tuners on each side of headstock, includes blue vinyl "VOX" paperwork folder, bridge cover, neck adjusting rod, and restringing instruction sheet, sounds great, "Made in Italy by Vox" on back of headstock, appears all original, w-b-w plastic pickguard (aged to cream color), on consignment, with original HSC (gold lining) (SN:270118)
26U-1779 $600.00

Classical Guitars

YAMAHA CGX-101 (recent) 13 Photos

EC except needs some work (polish frets, setup, etc. - sold AS-IS), laminated spruce top, black binding on body and neck, nato back and sides, nato neck with rosewood fingerboard, 19 frets, 2-1/16" nut width, 650mm scale, rosewood bridge, multi-color rosette, chrome tuners with pearloid buttons, factory pickup and preamp, natural finish, with SSC (SN:ON0076213)
28U-2150 $195.00

S. YAIRI MODEL 8900 (1973) 11 Photos

EC except could use minor work (polish frets, restring and set up, etc. - sold AS-IS), solid cedar top, mahogany back and sides, 12-fret mahogany neck, 19-fret rosewood fingerboard, side dot markers, ebonized bridge, 655mm scale, 2" nut width, ~4" body depth, 14-3/8" lower bout, label reads "Hand Made / Yairi Guitar / YAIRI GAKKI LTD. / NAGOYA / MADE IN JAPAN / AD.1973", label signed by S Yairi, inside back of guitar is stamped "SADA YAIRI / JAPAN", built in Japan (SN:G 1014)
28U-2159 $500.00

MARTIN 00-18C (1971) 20 Photos

VGC+ except needs work (repair top center seam, repair back cracks, cut down/reglue bridge, level and dress frets, strings, set-up etc. - sold AS-IS), 00-size, spruce top, mahogany back and sides, 12-fret mahogany neck, slotted headstock, 19-fret rosewood fingerboard, 2" nut width, 642mm scale length, Brazilian rosewood bridge, 3-on-a-plate tuners with white plastic buttons, with OSSC (red lining) (SN:275619)
28U-2142 $895.00

FAVILLA C-6 CONCERTO (1960's) 14 Photos

VG-EC but needs work (glue loose back binding, file fret ends, replace saddle, restring and set up, etc. - sold AS-IS), solid cedar top, mahogany sides and solid back, 12-fret mahogany neck with slotted headstock, 19-fret rosewood fingerboard with side dot markers, rosewood bridge, black body binding, simple rosette, 3-on-a-plate tuners with cream buttons, gold "FAVILLA" headstock crest with crown, 14-5/8" lower bout, 3-1/2" to 4" body depth, 25" scale (635mm), 2-1/16" (52mm) nut width, built in the U.S.A. by Herk Favilla and company, with rough semi-HSC (peach lining) (SN:500477)
28U-2095 $385.00

CORDOBA 20 ESTUDIO (2001) 14 Photos

EC- except needs some work (reglue loose bridge, dress frets, heat press neck, setup, etc. - sold AS-IS), gloss natural finish, solid cedar top, 14-7/8" lower bout, mahogany back and sides, mahogany neck with 19 fret rosewood fretboard, 2-1/16" nut width, 650 mm scale, maple bound body, rosewood bridge, 3-on-a-plate open gear tuners with white plastick buttons, made in Spain, with gigbag
28U-2137 $165.00

YAMAHA CG-171SF FLAMENCO (recent) 9 Photos

EC except needs some work, (polish frets, setup, etc. - sold AS-IS), 00-size, solid spruce top, cypress back and sides, gloss natural finish with aging toner, nato neck with rosewood fingerboard, 19 frets, 2.05" nut width, 25.6" scale, rosewood headstock overlay, dark tortoise plastic body binding, mosaic-style top purfling, back strip and rosette, gold tuners with pearloid buttons, clear pickguards, made in Asia (SN:QMZ217104)
28U-2152 $285.00

Solid Body Electric Guitars

GODIN SD (2006) 12 Photos

EC except needs work (clean electronics, polish frets, strings, set-up, etc. - sold AS-IS), sparkle blue finish, single cutaway body, bolt-on flamed maple neck, 24-fret rosewood fingerboard with pearl dot inlays, Godin hum-single-single pickup configuration, 5-way blad switch, 1 volume, 1 tone, black plastic pickguard, 1-5/32" nut width, ~24-7/8" scale, assembled in the U.S.A. from parts handcrafted in Canada, with gigbag (SN:06052405)
30U-14933 $295.00

EGMOND THUNDER (?) GUITAR (c.1965) 13 Photos

VG-EC, except needs some work (reglue loose fretboard, dress frets, trouble-shoot electronics, clean, setup, etc. - sold AS-IS), offset double cutaway multi-laminate body, sunburst finish, lots of checking and dings, big, round back hardwood neck with rosewood fretboard, 20 frets, pearl dot inlays, ~1-5/8" width at zero fret, ~24-5/8" scale length, 2 pickups, individual pickup on-off slider switches, tone (?) toggle switch, 1 volume and 1 tone control, height adjustable bar-bridge, tremolo tailpiece, single-ply pearloid pickguard, 6-on-a-plate open gear tuners with white buttons, made in Holland, with very rough SSC (SN:2172285)
30U-14744 $195.00

EPIPHONE LES PAUL CUSTOM (1996) 12 Photos

EC- except needs some work (dress frets, clean, setup, etc. - sold AS-IS), black finish, mahogany body and neck, bound body, headstock and rosewood fretboard, block inlays, 22 frets, 2 humbucking pickups, tune-o-matic style bridge, Bigsby tailpiece installed, sealed gear tuners, gold hardware, b-w-b-w pickguard, built in Asia, 1-11/16" nut, 24-3/4" scale, with gigbag (SN:S6117738)
30U-15100 $335.00

ESP MH-100QM (2007) 11 Photos

EC- except needs some work (polish frets, clean, setup, etc. - sold AS-IS), carved offset double cutaway agathis body with quilted maple top, transparent aqua finish, bolt-on maple neck with 24 fret rosewood fingerboard and pointed headstock, finish on headstock matches body, dot inlays with model at 12th fret, 2 ESP LH-100 humbucking pickups, 3 way toggle, master volume and tone, Floyd Rose licensed tremolo with locking nut, black hardware, smoke-chrome hardware, made in China (SN:L0711928)
30U-14996 $235.00

FENDER DELUXE SUPER STRATOC ASTER (2001) 12 Photos

EC- except needs minor work, (dress frets, replace missing tremolo arm and tremolo cavity cover, clean electronics, setup, etc. - sold AS-IS) the crimson (dark cherry) finish, gold vintage style tuners and tremolo and tortoise plastic pickguard, rosewood fretboard, dot markers, 3 staggered pole single coil pickups, extra switch allows 7 sounds, weight 7.4 lbs, built in Mexico, 1-11/16" nut, 25-1/2" scale, with gigbag (SN:MZ1123709)
30U-15126 $375.00

FENDER TORONADO (2002) 13 Photos

VGC+ except needs work (replace 1 knob, replace hex nut on toggle switch, polish frets, touchup two large paint chips on body and chip in headstock, clean electronics, restring, setup, etc. - sold AS-IS), black finish, poplar body with offset waist, bolt-on maple neck, 22-fret rosewood fingerboard, 1-11/16" nut width, 24-3/4" scale, 2 humbucking pickups, tortoise-w-b-w pickguard, vintage-style tuners, hardtail bridge, made in Mexico (SN:MZ2059660)
30U-15057 $300.00

GIBSON SG DELUXE (1998) 17 Photos

VGC except needs major work (neck has been broken off body and reattached, neck also broken at headstock and reglued, replace nut, bridge, volume and tone knobs, tremolo spring and pickguard, clean electronics, repair missing pieces of wood around repairs, repair or refinish, dress frets, setup, etc. - sold AS-IS), Blue Ice finish, rosewood fretboard, dot inlays, 3 Firebird style mini humbucking pickups, 6 way rotary switch, pearloid-b-w pickguard, Maestro vibrato, chrome tuners, transition model (later models with vibrato have ebony fretboards), this could be more fun than a barrel of monkeys and at least as much of a challenge, 1-11/16" nut, 24-3/4" scale, made in USA (SN:91418406)
30U-14659 $525.00

IBANEZ AX7271 12 Photos

EC, pewter finish, AX series seven (7) string, double cutaway body, bolt-on neck, bound rosewood fretboard, dot inlays, 22 frets, 2 humbucking pickups (AH1-7, AH2-7), modern bridge and tuners, sold AS-IS (needs fret level, strings, minor set up, etc), 2" nut, 24-3/4" scale, with gigbag (SN:C02082891)
30U-14767 $240.00

PEARL RIVER EG-7 (recent) 9 Photos

EC except needs minor work (dress frets, oil fingerboard, shim neck angle, clean pots, setup, etc. - sold AS-IS), off-set double cutaway solid hardwood body covered in dark blue pearloid front and back, maple neck with rosewood fretboard, 24 frets, dot inlays, 2 humbucking pickups, 1 volume and 1 tone control, 3-way pickup selector, adjustable bridge, bar tailpiece, 1-11/16" nut width, 25-1/2" scale, sealed back tuners, chrome hardware, made in Asia
30U-14713 $175.00

PEAVEY GENERATION EXP (recent) 12 Photos

VG-EC except needs work (strings, set-up, etc. - sold AS-IS), black finish, single cutaway, bolt-on maple neck, 21-fret rosewood fingerboard, 1-5/8" nut width, 25-1/2" scale, three single coil pickups, black plastic pickguard, chrome hardware, replacement chrome tuners, imported, with Godin gigbag (broken zipper) (SN:AQGE2270)
30U-14930 $125.00

PEAVEY HP EX (recent) 10 Photos

EC except needs some minor work (polish frets, setup, etc. - sold AS-IS), double cutaway contoured top solid body, black finish set-neck with rosewood fingerboard, no inlays, side dots only, 24 frets, 2 humbucking pickups, 2 volume and 1 tone control, 3-way pickup selector, t-o-m style bridge with string through body, made in Asia, with gigbag
30U-15110 $165.00

SCHECTER C1+ CLASSIC (1999) 13 Photos

EC except needs minor work (polish frets, tighten hardware, setup, etc. - sold AS-IS), Diamond series, tobacco-burst finish on flamed maple top, deep brown finish on mahogany body and neck, cream-bound 24-fret rosewood fingerboard, pearl and abalone inlays, 1-11/16" nut width, 25-1/2" scale, two Duncan designed humbucking pickups (JB / Jazz), strings anchor thru body, t-o-m style bridge, Grover tuners, chrome hardware, built in South Korea, with thermoplastic OHSC (black lining) (SN:99005424)
30U-14849 $385.00

SILVERTONE MODEL 1415 (c.1960) 14 Photos

EC-VG+, except for finish wear and small crack in back of neck in open chord position as well as needing some work (dress frets, setup, work some glue into crack on back of neck, etc. - sold AS-IS), copper finish, single cutaway, 21 fret brazilian rosewood fretboard, 3 point bridge with rosewood saddle, 6 in-a-line open gear tuners with white plastic buttons, 1 lipstick tube pickup, white plastic knobs on volume and tone controls, 3 position tone switch, dolphin nose headstock, 1-5/8" nut, 25" scale, CTS pots (can't read date, appear original), new jack, same as Danelectro U-1 except for headstock shape, with black HSC (black lining)
30U-14352 $875.00

TEISCO MJ-2 (c.1963) 12 Photos

EC-, except needs some work (dress frets, remove plastic zero fret and recut nut, clean electronics, setup, etc. sold AS-IS), offset double cutaway solid mahogany body, sunburst finish, mahogany neck with bound rosewood fretboard, 20 frets, position markers are rectangular white plastic inlays on bass side of fretboard, double inlays at 12th fret, (LONG!!) 6-in-a-line headstock with added string trees, individual open-gear tuners with white plastic buttons, 2 single coil pickups, silver anodized pickguard with individual rocker style pickup selector switches, 2 volume and 2 tone controls, height adjustable bridge, 1-3/4" nut width, ~24-3/4" scale, made in Japan, with black trapezoidal HSC (purple lining)
30U-14836 $450.00

YAMAHA RGZ121P (c.1988) 12 Photos

VG-EC except needs some work (dress frets, clean electronics, setup, etc. - sold AS-IS), off-set doble cutaway with pointed horns, metallic blue finish, maple neck with rosewood fingerboard, 22 frets, dot inlays, 1-9/16" nut width, 25-1/5" scale, 6-in-a-line sealed gear tuners, hum-single-hum pickup configuration, 1 volume and 1 tone control, 5-way pickup switch, vintage style tremolo, made in Taiwan, with gigbag
30U-14988 $150.00

As-IS Martin Guitars
As-IS Violin Family Instruments
As-IS Amplifiers
As-IS Hammered Dulimers
As-IS Accordions