EC-, mahogany neck and double white-bound resonator, 22-fret ebony fingerboard with pearl slotted diamond inlays, 1-9/32" nut width, ~26" scale, nickel hardware, one-piece flange, flathead tone ring, 3-ply rim, dual coordinator rods, Presto tailpiece, black headstock overlay, 2 import D-tuners and 2 original geared tuners with pearloid buttons, geared 5th string tuner, with arched-lid OHSC (blue lining) (SN:042138986753)
70U-3052
$1,650.00
DEERING DELUXE (2000)
16 Photos
EC-, mahogany neck and double white-bound resonator, 22-fret ebony fingerboard with pearl slotted diamond inlays, 1-9/32" nut width, ~26-1/8" scale, nickel hardware, one-piece flange, flathead tone ring, 5/8" maple rim, dual coordinator rods, Presto tailpiece, ebony peghead overlay with pearl banner that reads "DEERING", chrome geared tuners with pearloid buttons, geared 5th string tuner, something whited out on resonator label, with arched-lid wooden OHSC (blue lining) (SN:8914)
70U-3099
$1,550.00
|
DEERING GDL (2005)
15 Photos
EC+, Greg Deering Limited model with figured walnut resonator and walnut neck, ivoroid-bound ebony fingerboard with fancy inlays, 1-5/16" nut width, ~26-1/4" scale length, double-bound resonator, extensive abalone trim on side of neck, ivoroid heel cap, i-b-i-bound headstock, flathead tone ring, one-piece flange, Deering engraved tailpiece, railroad spikes at frets 7, 9, and 10, five geared tuners with pearloid buttons, nickel hardware, with OHSC (green lining) (SN:0325205F593)
70U-3130
$3,350.00
|
DEERING GOLDEN WREATH (2007)
15 Photos
EC, mahogany neck and resonator, white binding, 20-hole bell bronze tone ring, one-piece cast zinc flange, double cut peghead with one small finish chip, Deering engraved tailpiece, bound ebony fretboard with wreath pattern inlays, resonator has concentric circles of purfling on back, pre-war "Golden Era" styling a fuller neck and deeper resonator, resonator walls taper for better projection, railroad spikes at frets 7, 9 and 10, nickel hardware, 1-1/4" nut width, on consignment, Deering wooden archtop hardshell case (green lining) (SN:01136007J728)
70U-3125
$2,500.00
|
DEERING MAPLE BLOSSOM (1991)
16 Photos
EC, walnut stained flamed maple neck and double white-bound resonator, 22-fret ebony fingerboard with fancy pearl inlays, 1-3/16" nut width, 26-1/8" scale, nickel hardware, one-piece flange, no holes flathead tone ring, Presto tailpiece, b-w-b peghead overlay with pearl "DEERING" banner and floral inlays, five geared tuners, two Scruggs-Keith tuners installed, Shubb sliding 5th string capo installed, on consignment, with Protec triangular foam HSC (SN:1085291-1751)
70U-3092
$2,100.00
|
GIBSON CUSTOM 12" CONVERSION BANJO (c.1936)
20 Photos
VG-EC, this is a very rare bird indeed! A 1930's 12" rim from Gibson is virtually unheard of, and this instrument was undoubtedly some kind of custom order or experimental model. It features a 12" wood rim (29/32" thickness) with a 2-piece archtop tone ring (with 33 holes of 2 different sizes), tube and 4-piece flat plate flange, gold hardware, 26 brackets, with a First Quality 5-string neck (sunburst curly maple with ivoroid-bound rosewood fretboard, Flying Eagle inlays on neck and peghead, 2-band "GROVER PAT." tuners with mother-of-pearl tuners -- one modern repro tuner -- and modern geared 5th peg). Also includes the original plectrum 4-string dark-finished maple neck with 22-fret ebony fingerboard and yellowed pearloid block inlays at frets 1, 3, 5, 7, 10, 12, 15, 17, 19 and 22, double cut headstock with Flying Eagle style inlays, sunburst flamed maple resonator with 15" outer diameter and flat back (has been repaired on side), modern replacement Presto tailpiece engraved "Granada." On consignment, with guitar SSC - price reduced (SN:517-1)
70U-2963
$7,000.00
|
GIBSON MASTERTONE CONVERSION
15 Photos
EC, 1933 5/8" rim with original decal, highly flamed maple neck and sunburst finished double white-bound (non-original) resonator, white-bound 22-fret ebony fingerboard with hearts and flowers inlays, 1-3/16" nut width, 26-3/8" scale, gold hardware, newer 40-hole archtop tone ring and one-piece flange (broken original - gold plated, unusual - included), modern clamshell tailpiece, fancy pearl headstock inlays, four newer geared tuners with pearloid buttons, geared 5th string peg with pearl button, with recent flat-lid HSC (grey lining) , price reduced (SN:9489-17)
70U-2706
$7,500.00
|
GIBSON RB-1 (1926)
11 Photos
VG-EC except small repaired neck crack below headstock and some water damage to resonator finish, dark stained maple neck, rim and white-bound resonator, newer white-bound 22-fret ebony fingerboard with dot inlays, 1-3/16" nut width, 26-3/8" scale, flat plate flange with diamond cutouts, brass hoop tone ring, replacement tailpiece, silkscreened "The Gibson" peghead logo, five mechanical friction tuners with ivoroid buttons, with newer arched-lid HSC (SN:8652-5)
70U-2925
on hold...$3,500.00
|
GIBSON STYLE 75 FLATHEAD CONVERSION (late 1930's -- early 1940's)
16 Photos
VG-EC, original flathead tone ring, one-piece flange (in very nice shape, virtually no warpage at all), no label, 19/32" rim, 11" plastic head, original Presto tailpiece (with a center hole punched to accommodate 5 strings), double white-bound mahogany resonator with w-b-w concentric purfling rings, mahogany neck by (we are told) Frank Neat, white-bound rosewood fretboard with flying eagle inlay pattern, pearl Mastertone block inlay at 21st fret, railroad spikes at frets 7 and 9, double cut peghead, tuners appear to be Waverly double ring geared tuners with ivoroid buttons, nickel plated hardware. Includes an appraisal from Steve Huber which among other things states that it "is not uncommon to see a late flathead without a serial number chalked in the resonator or without a Mastertone warranty decal on the rim." We agree with this as well as the rim and all the hardware on the rim (including the flathead tone ring) is original, and that normally the serial number would appear on the back of the headstock (and the neck is not included or available). On consignment, with modern Gibson HSC (black interior). Important to note is that this banjo has a fantastic sound - it is loud and clear, a real herringbone killer! Easily one of the best we have heard.
70U-3100
$82,500.00
|
GOLD TONE BG-250 (recent)
15 Photos
EC, dark stained maple neck, w-b-w double-bound mahogany resonator, ~3/4" 12-ply pot, dual coordinator rods, Mastertone-style flathead tone ring, bound 22 fret rosewood fretboard with slotted diamond inlays, 24 bracket hooks, no flange, 5 geared tuners, fiddle-shaped peghead with pearl logo and diamond inlay, chrome hardware, armrest, ~26-3/8" scale, 1-3/16" nut width, Shubb sliding 5th string capo, on consignment, with black OHSC (grey lining) (SN:2005104)
70U-3126
$500.00
|
KALAMAZOO MODEL KRB (1930' s)
12 Photos
VG-EC, some rust and wear on tension hoop and brackets, partial refret (frets 1 through 5), repaired crack in headstock wing, mahogany neck, 22-fret rosewood fingerboard with pearl dot inlays, 1-1/4" nut width, ~26-3/8" scale, white-bound sunburst resonator, 5/8" sunburst finished rim, 16-brackets with individual flange pieces, 11" head, single coordinator rod, clamshell tailpiece cover, sunburst headstock face with white logo, five friction tuners with 4 yellow buttons and white 5th string tuner button, replacement 5th string peg, 4 small depressions on edge of fretboard for position markers between frets 6/7, 9/10, 11/12 and 16/17, really cool and rare model, with gigbag
70U-3075
$1,250.00
|
KIT OR PARTS BANJO
13 Photos
EC, transparent grey / black finished curly maple neck and w-b-w-bound resonator, 22-fret ebony fingerboard, pearl dot inlays and pearloid-b-w underlay, 1-1/4" nut width, 26-1/4" scale, two-piece flange, 40-hole archtop tone ring, Presto tailpiece, double-cut peghead, five geared tuners with pearloid buttons, Shubb sliding 5th string capo installed, decently assembled and finish, good sound
70U-2844
$1,000.00
|
LOUZEE WALNUT SUPREME (2003)
21 Photos
EC, really sharp looking banjo gold hardware and nicely figured walnut neck and w-b-w double-bound resonator, this also features a 5/8" "Lost Forest" block rim by Tony Pass, Hopkins flathead tone ring, one piece flange, engraving on tension hoop, armrest and tailpiece, white-bound 22-fret ebony fingerboard with unique inlays (they tell a story), block inlay at 21st fret reads "Superfluous", ebony peghead overlay with lyre and fancy inlays, engraved geared tuners with ivoroid buttons, cool red, green and gold purfling on resonator and neck, 27" scale, 1-3/16" nut width, railroad spikes installed at frets 7, 9, and 10, label inside rim signed by Mike Longworth, Paul and David Hopkins, this isn't a "Louzee Lyre" it's a great banjo! With deluxe OHSC (plum lining), on consignment (SN:030-1)
70U-3118
$3,500.00
|
NECHVILLE CLASSIC DELUXE MAPLE HELI-MOUNT (2005)
15 Photos
EC, walnut gloss finish, black bound maple resonator, maple rim, black Heli-mount hardware, Cyclatronic tone ring, maple neck, 22-fret radiused ebony fingerboard with diamond wing pearl inlays, 1-9/32" nut width, ~26-3/8" scale length, straight pull tailpiece, cocobolo armrest, geared tuners with pearloid buttons, railroad spikes installed in frets 7, 8, 9 and 10, signed by Tom Nechville 11/05, with arched-lid HSC (green lining) (SN:1105-555)
70U-3045
$2,500.00
|
STELLING BELLFLOWER (1984)
15 Photos
EC, walnut stained maple neck and double ivoroid-b-w-bound resonator, ivoroid-bound 22-fret ebony fingerboard with pearl flower and leaf inlays, "Bellflower" in pearl block at 19th fret, 1-1/4" nut width, 26-1/8" scale, laminated maple rim, one-piece flange, Stelling "Wedge-Fit" tone ring, ebony peghead overlay with pearl "STELLING" logo and leaf inlays, five geared tuners, railroad spike holes filled at frets 7-10 , railroad spike at fret 12, and gold Shubb 5th string capo installed, includes a pair of imported D-tuners, with OHSC (heel and tail pads have been removed from inside) (SN:2862)
70U-3127
$2,500.00
|
STELLING CRUSADER DELUXE (recent)
11 Photos
EC+, mahogany neck and double ivoroid-bound resonator, ivoroid-bound 22-fret ebony fingerboard with fancy pearl inlays, "Crusader" pearl inlay at 21st fret, 1-1/4" nut width, ~26-1/2" scale, block laminated "Lost Forest" old wood rim by Tony Pass, engraved gold hardware, one-piece flange, Stelling "Wedge-Fit" tone ring, white-bound ebony peghead overlay with pearl "STELLING" logo and fancy inlays, two geared tuners with white buttons, two Keith tuners installed, geared 5th string peg, railroad spikes installed at frets 7-10, this banjo features a slightly longer scale, fine sound, with OHSC (green lining) (SN:5918)
70U-2959
$4,200.00
|
Resonator Back Banjos (5-string)
 other vintage and used categories . . .
|
|
|
|
| 
