EC except needs work (replace tuner buttons, restring and set up, etc. - sold AS-IS), 13-1/4" lower bout, sunburst finish, ladder-braced top, 12-fret neck, 18-fret black dyed fingerboard, dot inlays, 1-3/4" nut width, 24-1/4" scale, dark stained bridge, white pickguard and top binding, nickel 3-on-a-plate tuners (buttons missing), set up Hawaiian style with extension nut, paper label inside for Aloha National Music Studios, rubber stamped with address of the Detroit, Michigan branch, with SSC (handle needs repair) (SN:934)
50U-1909
$175.00
ASHER STYLE 1 HAWAIIAN GUITAR (2008)
13 Photos
EC+, a very fine tribute to the classic Weissenborn guitars of the 1920's, solid koa top, back & sides, Weissenborn style body with hollow neck, lacquer finish, 19-fret koa fingerboard with dot inlays and diamond inlay on the 12th fret, maple bridge with metal saddle, 1-15/16" nut width, 2-3/16" string spacing at bridge, 24.9" scale, 15-1/4" lower bout, 2-3/8" to 2-3/4" body depth, Gotoh vintage-style tuners with butterbean buttons, label reads "Commemorative Weissenborn / Hourglass Style 1 #23", label signed by Bill Asher, this guitar is extremely light with a rich, huge sound! Nice example the quality guitars Bill builds, with Cedar Creek Custom OHSC (purple lining), on consignment (SN:405)
50U-1953
$2,700.00
|
BEARD MODEL 175 ROUNDNECK (2007)
12 Photos
EC+, roundneck resonator guitar with figured English walnut sides and book-matched 4-piece back, spruce top, mahogany neck, "R" body style ('30s era Regal size), dual screenholes, natural gloss finish, flame maple binding on top, back, fingerboard & peghead, ebony board with snowflake inlay, solid peghead and chrome hardware, soundwell with spun Beard cone, spider bridge and "lyre" coverplate, Waverly butterbean tuners, chrome-plated hardware, beautiful custom instrument with "one-off" details (lyre coverplate, inlay pattern), label dated 03-05-07, OHSC (burgundy lining) (SN:040507)
50U-1944
$3,300.00
|
CRAFTERS OF TENNESSEE (FORMERLY RICH & TAYLOR) TENNESSEAN (recent)
12 Photos
EC-, 14-1/8" lower bout, gloss sunburst finish, solid mahogany construction, 12-fret square mahogany neck, bound 19-fret ebony fingerboard with fancy abalone inlays, 1-31/32" nut width, 24-1/2" scale length, spider bridge, 10" spun aluminum cone, "lyre" coverplate, dual holes (without screens), white-bound body, rosewood headstock overlay with "Tut Taylor Resophonic" decal, vintage-style tuners with butterbean buttons, with arched-lid HSC (black lining) (SN:061801)
50U-1843
$1,500.00
|
DEAN SPS (recent)
12 Photos
EC, cherry sunburst finish, laminated spruce top, mahogany back and sides, 14-fret square neck, slotted headstock, 19-fret rosewood fingerboard with dot inlays, dual screen holes, spider bridge, fan design coverplate, w-b-w-b-w-b-bound top, bound back and fretboard, 14-3/4" lower bout, ~25" scale, 2-1/16" nut width, 3-3/4" body depth, made in Korea, with gigbag
50U-1885
$295.00
|
DEL VECCHIO RESONATOR GUITAR (1960's?)
14 Photos
EC-, laminated walnut body construction, maple body binding, 14-1/2" lower bout, ~4" body depth, 12-fret round neck with slotted headstock (2-piece mahogany with center strip), engraved 3-on-a-plate open gear tuners with white rectangular buttons, metal plaque on peghead reads "DEL VECCHIO / INDUSTRIA BRASILEIRA / C.G.C. 44.001.808/001-69", 19-fret rosewood fingerboard, zero fret, 2 large holes with aluminum covers in top simulate screen holes, 5 (smaller) similar holes in wooden resonator cover, biscuit-style bridge, trapeze tailpiece has sticker on it that reads "SOM DEMBER", NO soundwell, National cone installed, ~25-3/8" scale, 1-13/16" nut width, built in Brazil, with SSC, on consignment
50U-1946
$1,400.00
|
DOBRO 60D (1994)
13 Photos
EC- except truss rod is at maximum adjustment and needs work (refret to straighten neck, install new cone, reinstall pickup, replace truss rod cover, strings, setup, etc. - sold AS-IS), sunburst finish maple body with checking throughout, 12-fret maple neck with slotted headstock, rosewood fingerboard with pearl dot inlays, 1-3/4" nut width, 24-3/4" scale length, spider bridge, fan design coverplate, dual screen holes, 3 small soundholes at end of fretboard, white body binding, with HSC, price reduced (SN:W8 771 94D)
50U-1772
$700.00
|
DOBRO 60D (1995)
14 Photos
EC, sunburst finish all around, 14-1/4" lower bout, round neck, maple top, back, sides and (12-fret) neck, solid peghead, rosewood fretboard, dot inlays, 19 frets, 3 small holes in top at end of fretboard, soundwell, spider bridge, 10-1/2" cone, fan design coverplate, 2 screenholes, Grover tuners, 1-3/4" nut, 24-1/2" scale, with black flat lid OHSC (gray lining), on consignment (SN:D4 079 95)
50U-1934
$1,350.00
|
DOBRO 60D ROUNDNECK (1983)
12 Photos
VG-EC except needs much work (remove extension nut, enlarge truss rod cavity to allow more adjustment for very bowed neck, glue and dress frets, reshaped or replace distorted original cone, turn replacement tuners around, setup, etc. - sold AS-IS), sunburst finish, maple body and 12-fret roundneck, bound top and back, slotted headstock, rosewood fingerboard, 19 frets, dot inlays, spider bridge, fan design coverplate, dual screen holes and 3 holes at end of fingerboard extension, stamped tailpiece, chrome hardware, 1-3/4" nut width, 24-3/4" scale
50U-1955
$850.00
|
DOBRO 60D-S (1975)
15 Photos
VG-EC, 3-color sunburst finish all around, laminated maple body, 12-fret square maple neck, slotted headstock, 19-fret rosewood fingerboard, dot inlays, 1-13/16" nut width, 24-1/2" scale, dual screenholes, three holes in top at base of fingerboard, 10-1/2" cone with spider bridge, soundwell, nickel hardware, fan design coverplate, stamped tailpiece, white-bound body, 6 individual open-gear tuners with metal buttons, with HSC (red lining) (SN:D 1178 5)
50U-1962
$1,200.00
|
DOBRO 60DS (1979)
13 Photos
EC, sunburst finish all around, laminated maple body, 12-fret square maple neck, slotted headstock, 19-fret rosewood fingerboard, dot inlays, 1-13/16" nut width, 24-1/2" scale, dual screenholes, three holes in top at base of fingerboard, 10-1/2" cone with spider bridge, soundwell, nickel hardware, fan design coverplate, stamped tailpiece, white-bound body, 3-on-a-plate tuners, on consignment, with OHSC (blue lining) (SN:D 464 9)
50U-1913
$1,400.00
|
DOBRO 60DS (1979)
11 Photos
VG-EC, sunburst finish all around (almost a cherry sunburst), a couple of small dings touched up on top, laminated maple body, 12-fret square maple neck, slotted headstock, 19-fret rosewood fingerboard, dot inlays, 1-7/8" nut width, 24-1/2" scale, 14-1/4" lower bout, ~3-1/2" body depth, dual screenholes, three holes in top at base of fingerboard, 10-1/2" cone with spider bridge (new cone installed by our shop), soundwell, nickel hardware, fan design coverplate, stamped tailpiece, white-bound body, 3-on-a-plate tuners, with OHSC (burgundy lining), on consignment (SN:D 693 9)
50U-1921
$1,400.00
|
DOBRO DM-75 "LILY OF THE VALLEY" (1994)
13 Photos
EC+, chrome-plated brass body with engraving on front, back and sides, 10 1/2" diameter cone resonator with biscuit bridge, maple neck, white binding on ebony fretboard with pearl diamond inlay, partially bound solid peghead with pearl Dobro logo, chrome sealed gear tuners with metal buttons, 1-7/8" nut width, ~24-1/2" scale, on consignment, with OHSC (black lining) (SN:M12 1198 94B)
50U-1943
$2,400.00
|
DOBRO F-60 (1996)
13 Photos
EC, satin sunburst finish, laminated maple body, f-holes, 12-fret round maple neck, slotted headstock, 19-fret rosewood fingerboard with pearloid dot inlays, spider bridge, fan design coverplate, trapeze tailpiece, new Quarterman cone installed by our shop, 3-on-a-plate open gear tuners with white rectangular plastic buttons, 14-1/8" lower bout, 24-5/8" scale, 1-3/4" nut width, 3-3/16" to 3-3/8" body depth, with black flat lid wooden OHSC (gray lining), price reduced (SN:B3 129 96)
50U-1804
$1,300.00
|
DOBRO F-60S (1994)
12 Photos
EC-, sunburst finish, maple body with f-holes, 12-fret square maple neck with slotted headstock, 19-fret rosewood fingerboard, dot inlays, 14-1/8" lower bout, ~3-3/8" body depth, 1-13/16" nut width, ~24-1/2" scale, nickel hardware, spider bridge, Quarterman cone installed, soundwell, fan design coverplate, trapeze tailpiece, 3-on-a-plate open-gear tuners, with arched-lid HSC, price reduced (SN:P 6563 94D)
50U-1723
$1,100.00
|
DOBRO F-60S (1995)
12 Photos
EC-, satin sunburst finish with some crazing and minor dings, capo marks on neck edges, maple body with f-holes, 12-fret square maple neck with slotted headstock, 19-fret rosewood fingerboard, dot inlays, 14-1/8" lower bout, ~3-3/8" body depth, 1-13/16" nut width, ~24-1/2" scale, nickel hardware, spider bridge, soundwell, fan design coverplate, trapeze tailpiece, 3-on-a-plate open-gear tuners, with flat-lid OHSC, price reduced (SN:DA16995)
50U-1816
$1,100.00
|
DOBRO MODEL 27 DELUXE (2005)
11 Photos
EC, 14-1/4" lower bout, sunburst finish, figured maple body, 12-fret square maple neck, ivoroid-bound 19-fret fingerboard with pearl lyre inlays, 2" nut width, 25" scale length, poinsettia coverplate, dual screen holes, spider bridge, 10-1/2" spun aluminum cone, ebony peghead overlay with pearl lyre "Dobro" logo, chrome Grover mini Rotomatic tuners, with black OHSC (black lining) (SN:D5020130)
50U-1845
$2,500.00
|
DOBRO MODEL 60D (1978)
14 Photos
EC, sunburst finish all around, laminated maple body, roundback 12-fret maple neck, slotted headstock, 19-fret rosewood fingerboard, dot inlays, 1-13/16" nut width, 24-1/2" scale, dual screenholes, three holes in top at base of fingerboard, 10-1/2" cone with spider bridge, soundwell, nickel hardware, fan design coverplate, stamped tailpiece, white-bound body, 3-on-a-plate tuners with white plastic buttons, on consignment, with HSC (burgundy lining) (SN:D7908)
50U-1911
$1,450.00
|
DOBRO PHIL LEADBETTER (recent)
13 Photos
EC, Artist model, 14-1/8" lower bout, 4-1/8" body depth, all solid ivoroid bound maple body, sunburst finish, ivoroid bound 12 fret square maple neck, 19 fret ebony fingerboard with dot inlays, 2" nut width, ~25" scale length, spider bridge and cone supported by soundposts (no soundwell), chrome fan design coverplate, two screenholes, chrome tuners with ebony buttons, Fishman pickup installed, with original Travelite cordura covered hard foam case (SN:D8040220)
50U-1935
$1,750.00
|
HARMONY PROFESSIONAL H1252 HAWAIIAN GUITAR (c.1940)
11 Photos
EC- except a couple of well repaired top cracks by the center and a repaired side crack, this very cool guitar was the "top of the food chain" when it came to Harmony Hawaiian style guitars, double bound "Extra Auditorium" (15-/1/2") body, spruce top, flamed mahogany back and sides (catalog says it should be "figured mahogany" but looks like KOA wood to me), mahogany square neck, bound Brazilian rosewood fretboard, diamond, dot and block inlays, 18 frets, screwed on rosewood bridge, snazzy pearloid headstock overlay, 3-on-a-plate tuners, just a peach of a guitar, 40's era Electromuse "Eye-Beam" sound hole pickup installed "way back when," modern endpin jack installed recently, 1-15/16" nut, 25" scale, on consignment (SN:2484)
50U-1951
$2,500.00
|
HODGKINS RESOPHONIC SQUARENECK (recent)
13 Photos
EC-, 14" lower bout, sunburst finish, cherry body, 12-fret square neck, rosewood fretboard with pearl dot inlays and 19-ivoroid fret lines, 1-7/8" nut width, 25" scale, dual screen holes, spider bridge and spun cone, chrome fan-style coverplate, ivoroid-bound body and fingerboard, pearl banner headstock inlay engraved "Hodgkins", chrome Grover Rotomatic tuners, with faux alligator flat-lid HSC (brown lining) (SN:03199)
50U-1867
$1,400.00
|
JULIAN TUBB MODEL C STUDIO (recent)
12 Photos
EC+, double bound 15" body, gloss natural finish, solid spruce top, solid mahogany back and sides, 3-piece mahogany-maple-mahogany square neck, solid headstock, bound ebony fretboard, abalone dot inlays, 19 frets, spider bridge and 10" resonator cone, fan style coverplate, trapeze tailpiece, internally baffled (no soundwell), bound ebony headstock overlay with fancy abalone inlay, Schaller tuners, gold hardware, fine instrument with all wood binding handmade in Canada, set up tweeked by Tim Scheerhorn, 1-7/8" nut, 25" scale, with brown arched-lid HSC (green lining), on consignment
50U-1964
$2,400.00
|
KONA STYLE 2 HAWAIIAN GUITAR (1927-1928)
12 Photos
EC-, solid spruce top, solid koa wood sides, back and neck, round neck (set up for Hawaiian style playing), X-braced body, 19-fret fingerboard, pearl dot inlays, 1-15/16" nut width, ~24-7/8" scale, 5.5" wooden bridge, ivoroid-bound body and fingerboard, nickel 3-on-a-plate tuners with ivoroid buttons, made by Weissenborn, with OSSC
50U-1904
$2,750.00
|
MARTIN 0-18KH HAWAIIAN GUITAR (1927)
12 Photos
EC-, 13-3/4" lower bout, nicely figured koa top, back and sides, X-braced top, 12-fret round mahogany neck with slotted headstock, 20-fret ebony fingerboard (flush frets), pearl dot inlays, replacement ebony bridge by our shop, high ebony nut, rosewood body binding, Brazilian rosewood peghead overlay, 3-on-a-plate open-gear tuners with ivoroid buttons, rare model, fine sound, with OSSC (purple lining) (SN:33908)
50U-1865
$3,000.00
|
NATIONAL STYLE 1 TRICONE (1999)
12 Photos
EC+, 14-1/4" lower bout, nickel plated brass body, lattice soundholes, 12-fret round mahogany neck with slotted headstock, ivoroid-bound 19-fret ebony fingerboard, ivoroid dot inlays, 1-13/16" nut width, 25-3/4" scale, T-bar bridge, three resonator cones, diamond shaped screenholes in nickel coverplate, stamped tailpiece, 3-on-a-plate tuners, with OHSC (black lining) (SN:505)
50U-1960
$2,485.00
|
OAHU HAWAIIAN GUITAR (1930's?)
11 Photos
G-VGC, needs work (repair 7 top cracks, reglue bridge, 3 back cracks, needs endpin and several bridge pins, strings, setup, etc. - sold AS-IS), all solid mahogany (looks a lot like koa, though) body, ladder-braced top, 12-5/8" lower bout, V-neck, high nut, straight saddle on pyramid bridge, ~24-23/32" scale, ~1-7/8" nut width, 3-in-a-line brass-colored tuners with cream-colored buttons, dark trim around tim, checkerboard trim around soundhole, appears nicely refinished
50U-1853
$400.00
|
OAHU STYLE 52K HAWAIIAN GUITAR (1930's)
12 Photos
VG-EC except needs work (replace bridge, fill neck gap, clean, restring and set up, etc. - sold AS-IS), small body, ladder braced, black / gray sunburst finish, cool palm trees and women playing a ukulele? on the beach decals on front of the guitar, 12-fret neck with slotted headstock, red painted on top purfling and soundhole rosette, rectangular bridge with metal saddle, Oahu calls the fingerboard covering "Imitation Pearlette", 18-frets, 13-1/8" body depth, 1-3/4" nut width, ~24-1/4" scale, 3-1/4" to 3-5/8" body depth, inside hot stamped "OAHU PUBLISHING CO / 805 EUCLID AVE / CLEVELAND OHIO", very cool! With end-loading canvas SSC (SN:F33)
50U-1956
$295.00
|
RAYCO CUSTOM ROUNDNECK (2008)
13 Photos
EC+, gloss natural finish, all solid mahogany body, round 14-fret mahogany neck, maple-b-w-bound 21-fret ebony fingerboard with slotted diamond inlays, dual screenholes, Quarterman cone, spider bridge, trapeze tailpiece, fan coverplate, 510 Gotoh Super Machine tuners, ebony headstock overlay with pearl "Rayco" logo, 14-1/2" lower bout, ~25" scale, 1-13/16" nut width, 3-3/8" to 3-3/4" body depth, flamed maple-b-w-b double-bound body, fine instrument, handcrafted in Canada, with arched-lid OHSC (gray lining) (SN:146)
50U-1958
$2,285.00
|
REGAL / DOBRO MODEL 37 (1933-37)
17 Photos
VG-EC, 14-1/8" lower bout, white-bound birch body, sunburst top with dual screenholes, dark stained back and sides, 12-fret V-shaped round mahogany neck with slotted headstock, 19-fret ebonized fingerboard with dot inlays, 1-13/16" nut width, 25" scale, ~3-1/2" body depth, nickel hardware, original spider bridge and stamped cone, new saddles, no soundwell, fan design coverplate stamped "1,896,484 / OTHER PATS. PEND.", trapeze tailpiece, 3-on-a-plate tuners with white plastic buttons, previous neck reset, currently set up for Hawaiian style with extension nut, with TKL HSC (burgundy lining), on consignment
50U-1914
$1,100.00
|
REGAL BLACK LIGHTNING (recent)
11 Photos
EC, squareneck model, Quarterman cone, classic laminated 12-fret mahogany body with gloss translucent dark brown finish, dot inlaid fretboard, solid peghead wtih distinctive lightning-bolt inlay, open gear tuners with butterbean buttons, spider bridge, soundwell, dual screen-holes (screens have been removed), fan coverplate, trapeze tailpiece, all hardware nickel plated, ivoroid bound body neck, 2" nut width, ~25" scale, made in Asia, with flat-lid HSC (black lining)
50U-1947
$475.00
|
TERRIS SQUARENECK RESONATOR GUITAR (2001)
13 Photos
EC-, 14-1/4" lower bout, sunburst finish, solid flamed maple top, back, sides and 12-fret square neck, solid headstock, ivoroid-bound 19-fret ebony fingerboard with dot inlays, 2" nut width, 24-3/4" scale, spider bridge and spun cone, chrome fan coverplate, stamped tailpiece, ivoroid-bound body, Brazilian rosewood peghead overlay with "Terris" logo inlay, brushed chrome Sperzel locking tuners, two filled holes from previously installed electronics near endblock, handmade by Michael Terris, excellent sound, with arched-lid HSC (burgundy lining) (SN:121)
50U-1897
$1,650.00
|
WECHTER / SCHEERHORN 6524-R (recent)
12 Photos
EC+, 14-1/2" lower bout, maple almond sunburst finish, laminated flamed maple body, square mahogany neck, cream-bound rosewood fingerboard with 19 inlaid fret lines and pearl dot markers, 1-15/16" nut width, 25" scale, cast spider bridge with hard maple inserts, spun aluminum cone, dual f-holes, chrome hardware, fan design coverplate, internal soundpost and baffle design (no soundwell), with gigbag (black lining) (SN:15000)
50U-1933
$785.00
|
Resonator & Hawaiian Guitars
 other vintage and used categories . . .
|
|
|
|
| 
