EC except needs minor work (dress frets, setup, etc. - sold AS-IS), acoustic-electric, 16-1/4" lower bout, rounded cutaway, gloss natural finish, solid spruce top, maple back, sides, and 14-fret neck, white-bound 20-fret rosewood fingerboard, single pearl slash with slotted diamond inlay at 12th fret, 1-11/16" nut width, 25-1/2" scale, rosewood bridge, white-bound body and headstock, black pickguard, System 600T MKII pickup / preamp with 3-band EQ, notch filter, phase reversal, and chromatic tuner, made in Korea, with gigbag (SN:06066106)
20U-11895
$385.00
AVALON L320C (recent)
13 Photos
EC+, 16-1/4" lower bout, 4" to 4-7/8" body depth, rounded cutaway, semi-gloss natural finish, solid spruce top, solid Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard without inlays, bound with rosewood and maple, 1-3/4" nut width, 25-1/2" scale, Brazilian rosewood bridge with split saddle, abalone rosette, maple-bound body, b-w-b-r-b-w-b top purfling Brazilian rosewood headstock overlay with pearl "A" inlay, gold tuners with ebony buttons, very fine sound, handcrafted in Ireland from the folks that brought you Lowden guitars, pickup has been removed, newer endpin, original endpin and extra saddles included, on consignment, with thermoplastic OHSC (black lining) (SN:L-00944)
20U-11761
$2,950.00
|
BABICZ IDENTITY DRW-06 (recent)
14 Photos
EC-, interesting design featuring a lateral compression soundboard (strings hook into ferrules that are attached directly to soundboard and internal bridge plates), continually adjustable neck and torque reducing split bridge, all solid woods, natural satin finished spruce top, natural gloss finished rosewood back and sides, 14-fret mahogany back and neck, 20-fret rosewood fingerboard with dot inlays, clear pickguard, black Grover Rotomatic tuners, 15-1/2" lower bout, 25.5" scale, 4-1/8" to 4-5/8" body depth, 1-11/16" nut width, black-bound body and fretboard, faux abalone soundhole rosette, with OHSC (blue lining), on consignment (SN:0536202)
20U-11704
$650.00
|
BOURGEOIS COUNTRY BOY DELUXE (recent)
12 Photos
EC+, D-size, sunburst finished Adirondack spruce top, flamed mahogany back and sides, 14-fret mahogany neck, rosewood-bound 20-fret ebony fingerboard, pearl micro dot inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, rosewood-bound body, Brazilian rosewood headstock overlay, gold Waverly tuners with butterbean buttons, interior label signed by Dana Bourgeois, fine sound, on consignment, with arched-lid HSC (blue lining) -price reduced (SN:003843)
20U-11388
$2,750.00
|
BOURGEOIS JOMC SITKA TOP (2005)
14 Photos
EC+ jumbo orchestral model, 15-5/8" lower bout, rounded cutaway, gloss natural finish, figured sitka spruce top, rosewood back and sides, 3-3/4" to 4-3/4" body depth, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fretboard with abalone leaf inlays, ebony bridge, ebony peghead overlay with ivoroid border and pearl "Bourgeois" logo, tortoise plastic pickguard, ivoroid double-bound body with b-i-b purfling, nickel Waverly tuners with butterbean buttons, decorative backstripe, 25.5" scale, 1-3/4" nut width, built in Maine, signed by Dana Bourgeois, gorgeous guitar with fine sound! with OHSC (blue lining) (SN:003428)
20U-11844
$2,985.00
|
BOURGEOIS PROFESSIONAL SERIES OM (2002)
13 Photos
EC, gloss natural finish, spruce top, scalloped bracing, Indian rosewood sides and back, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard with slotted diamond inlays, ebony bridge, tortoise plastic body binding and pickguard, rosewood peghead overlay with pearl "Bourgeois" logo, Waverly tuners with butterbean buttons, 15-1/8" lower bout, ~25.5" scale, 1-23/32" nut width, 3-1/4" to 4" body depth, attractive backstrip, active I-beam pickup installed with volume control and 1/4" endpin jack, plugged hole in heel from removed strap button, label signed by Dana, nice handcrafted guitar, with TKL HSC (burgundy lining) (SN:002237)
20U-11886
$2,500.00
|
BOURGEOIS RICKY SKAGGS SIGNATURE MODEL (1998)
14 Photos
EC-, D-size, 15-5/8" lower bout, spruce top, rosewood back and sides, mahogany neck, ivoroid bound neck, headstock, and body, ebony fretboard with split diamond inlays, rosewood headstock overlay with pearl logo, ebony belly bridge, abalone soundhole rosette, tortoise plastic pickguard, Waverly tuners with butterbean buttons, 25-5/8" scale, 1-3/4" nut width, big, rich tone! with OHSC (blue lining) (SN:001331)
20U-11862
$2,485.00
|
BREEDLOVE FOCUS (2005)
16 Photos
EC- except for repaired top crack, 15-1/4" lower bout, rounded cutaway, gloss natural finish, solid cedar top, solid rosewood back and sides, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard, abalone "Focus" inlays, 1-3/4" nut width, 25-1/2" scale, pinless ebony bridge, abalone soundhole ring, black-bound body, w-b-w-b top purfling, ebony headstock overlay with pearl "B" inlay, chrome Grover mini Rotomatic tuners, L.R. Baggs Dual Source pickup / mic / preamp system, fine sound, with arched-lid OHSC (black lining) (SN:8461)
20U-11689
$1,750.00
|
BREEDLOVE SC25 CUSTOM (2006)
12 Photos
EC, 15-3/8" lower bout, rounded cutaway, gloss natural finish, solid spruce top, solid flamed myrtle back and sides, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard, fancy abalone inlays, 1-3/4" nut width, 25-1/2" scale, pinless ebony bridge with factory "Bridge Doctor", abalone rosette, black-bound bldy with herringbone top purfling, striped ebony headstock overlay with pearl "B" inlay, chrome Grover mini Rotomatic tuners with ebony buttons, L.R. Baggs Dual Source pickup system installed, fine sound, made in Oregon, interior label signed by Kim Breedlove, with arched-lid OHSC (black lining) (SN:9231)
20U-11850
$3,425.00
|
COLLINGS DS2HA (recent)
14 Photos
EC+, gloss natural finish, Adirondack spruce top with herringbone top trim, scalloped bracing, Indian rosewood back and sides, zipper backstripe, ivoroid-bound body, 12-fret mahogany neck, 19-fret ebony fretboard with slotted diamond inlays, 1-25/32" nut width, 25-1/2" scale length, ebony bridge, tortoise plastic pickguard, slotted headstock with Brazilian overlay and pearl "Collings" logo, Waverly tuners with butterbean buttons, handcrafted in Texas and has the big sound to match, with Geib-style OHSC (green lining) (SN:12928)
20U-11782
$3,400.00
|
COLLINGS OM1 KOA (recent)
12 Photos
EC+, German spruce top, scalloped bracing, highly flamed Koa sides and bookmatched back, 14-fret mahogany neck, gloss natural finish, all solid woods, black-bound 20-fret ebony fingerboard with dot inlays, ebony bridge, small tortoise plastic pickguard, ebony peghead overlay with pearl "Collings" logo, chrome Waverly tuners with butterbean buttons, tortoise plastic body binding, wood top purflings, 15" lower bout, 25.5" scale, 1-3/4" nut width, 3-1/4" to 4" body depth, very nice looking and sounding guitar! With Geib-style OHSC (green lining), on consignment (SN:13483)
20U-11758
$3,800.00
|
COLLINGS SJ SB CUSTOM (recent)
12 Photos
EC+, 16-1/8" lower bout, full body sunburst finish and neck as well (FBSB), spruce top with scalloped bracing, highly flamed maple back and sides, 14-fret flamed maple neck, 20-fret ebony fingerboard with notched and scalloped diamond inlays, 1-3/4" nut width, 25-5/8" scale length, ebony bridge, tortoise plastic pickguard, tortoise plastic-bound body, fingerboard and headstock, ebony headstock overlay with pearl "Collings" logo and fancy pearl inlay, nickel open-gear Waverly tuners with ebony buttons, fine sound, on consignment, with arched-lid OHSC (green lining) - price reduced (SN:13219)
20U-11527
$3,800.00
|
CORT MR600N (1999)
10 Photos
EC except needs some work (cut down bridge and saddle to lower action, reglue bridge, setup, etc., - sold AS-IS), D-size body with florentine cutaway, spruce top with oval soundhole, mahogany back and sides, mahogany neck with 22 fret rosewood fingerboard, dot inlays, 6-in-a-line headstock, chrome sealed tuners, black plastic pickguard, made in Korea, gigbag
20U-11646
$125.00
|
EMENEE "OHIO ART" BOSS GUITAR AMERICA PLASTIC TOY GUITAR (1980'S)
6 Photos
VGC, all plastic construction, red top with injection molded integral bridge, paper label with the "Ohio Art BOSS Guitar America" on it, white body and neck, red fingerboard with 16 integral frets, 1-17/32" nut width, 19" scale, red plastic headstock overlay, plastic tuners missing, made by Emenee Industries of Bryan, Ohio. Not to be confused with a functioning instrument, this is a collectible TOY. Sold AS-IS.
20U-11157
$25.00
|
FENDER DG10CE NAT (2000)
13 Photos
VG-EC except needs work (remove sticker repair top crack, take bridge down from top, restring and set up, etc. - sold AS-IS), D-size, acoustic-electric, rounded cutaway, satin natural finish, spruce top, mahogany back and sides (all laminate), 14-fret mahogany neck, black-bound 20-fret rosewood fingerboard with dot inlays, 1-1/16" nut width, 25-1/2" scale, 15-3/4" lower bout, 3-7/8" to 4-7/8" body depth, rosewood bridge, black pickguard and body binding, chrome tuners, factory Mini Convertible II pickup system, made in Korea, with Superior gigbag (SN:KA:00031635)
20U-11907
$150.00
|
FENDER DG8 (1998)
13 Photos
EC except needs some minor work (polish frets, reglue bridge, setup, etc. - sold AS-IS), D-size, natural gloss finish, laminate spruce top, nato back and sides, 14-fret nato neck, 20 fret rosewood fingerboard with dot inlays, 1-11/16" nut width, 25-1/4" scale length, rosewood bridge, chrome tuners, black pickguard, body and fretboard binding, built in Korea, with gigbag (SN:KS98102960)
20U-11859
$80.00
|
GARRISON F20 (2003)
14 Photos
EC except needs some work (dress frets, setup, etc. - sold AS-IS), D-size, satin natural finish, solid spruce top, solid birch back and sides, 14-fret mahogany neck, black-bound 20-fret rosewood fingerboard, abalone dot inlays, 1-11/16" nut width, 25-1/2" scale, rosewood bridge, black pickguard, chrome tuners, factory Buzz Feiten Tuning System, built around a unique carbon fiber internal frame / bracing system, L.R. Baggs Active Element installed, made in Canada, with OHSC (black lining) (SN:030515080)
20U-11750
$485.00
|
GIBSON 1942 ROSEWOOD SOUTHERN JUMBO REISSUE (2004)
13 Photos
EC, 16" lower bout, 3-3/4" to 4-3/4" body depth, sloped shoulders, sunburst finished spruce top, rosewood back and sides, 14-fret mahogany neck, 19-fret rosewood fingerboard with pearl double parallelogram inlays, 1-23/32" nut width, 24-3/4" scale, rosewood belly bridge with long saddle and pearl dot inlays, white-bound body and fretboard, b-w-b-w top purfling, b-w-b back purfling, firestripe tortoise plastic pickguard, vintage-style tuners with white buttons, banner headstock reads "ONLY A GIBSON IS GOOD ENOUGH", interior orange label reads "FULLER'S VINTAGE GUITAR", with black OHSC (blue lining) (SN:02894004)
20U-10986
$2,550.00
|
GIBSON 60's AUTHENTIC HUMMING BIRD (2003)
14 Photos
EC, Limited Edition, 16" lower bout, sunburst Sitka spruce top, solid mahogany back and sides, 14-fret mahogany neck, white-bound 20-fret rosewood fingerboard with pearloid double parallelogram inlays, 1-3/4" nut width, 24-3/4" scale, rosewood reverse belly bridge with pearl dot inlays, etched pickguard from the original 60's casting molds, w-b-w-b-w-bound top, white-bound back, gold Kluson-style tuners with keystone buttons, with certificate stating this is one of the pilot run of 24 instruments and signed by Ren Ferguson (Gibson Montana's master luthier), really good sound, made in Montana, with special 1960's style OHSC with brass "Gibson" nameplate and yellow plush lining (SN:02083020)
20U-11897
$2,400.00
|
GIBSON B-25 (1969)
14 Photos
VG-EC, 14-1/4" lower bout, sunburst finished X-braced spruce top, mahogany back and sides, 14-fret 3-peice mahogany neck, 20-fret rosewood fingerboard, pearl dot inlays, 1-9/16" nut width, 24-3/4" scale, raised pearl logo on headstock with B-25 engraved on truss rod cover,rosewood bridge with adjustable saddle, black plastic pickguard, white-bound body, 3-on-a-plate covered gear tuners with plastic buttons, with semi-hardshell case (gold lining) (SN:912653)
20U-11723
$1,250.00
|
GIBSON BLUERIDGE CUSTOM (1974-75)
15 Photos
VG-EC except needs lots of work (replace one tuner, glue headstock seam, refret to straighten neck, setup, etc. - sold AS-IS), natural finish solid spruce top, rosewood back and sides, 16" lower bout, dark-stained 3-piece maple neck with 20 fret rosewood fretboard, pearl dot inlays, 1-11/16" nut width, 25-1/2" scale, replacement Martin-style ebony bridge, double black-bound body, w-b-w top and back purfling, replacement tortoise plastic pickguard, replacement tuners tuners with metal buttons, repaired end-block crack, tuners have been changed more than once, brown "Wheatland Festival with pine trees" graphic painted on top of guitar in brown paint, trussrod is at maximum adjustment, plugged jackplate hole on side, repaired center seam and treble side cracks, this guitar has had numerous modifications, just needs some TLC, made in Kalamazoo, rough SSC (brown lining) (SN:B002017)
20U-11926
$550.00
|
GIBSON HARLEY DAVIDSON LIMITED EDITION (1994)
12 Photos
EC except could use work (refret to true and straighten fingerboard, restring and set up, etc. - sold AS-IS), #192 of 1500, gloss black finish, 15-3/4" lower bout, 3-3/4" to 4-5/8" body depth, all solid woods, spruce top, maple back and sides, 14-fret maple neck, white-bound 20-fret ebony fingerboard with pearl shield inlays, 1-23/32" nut width, 24-3/4" scale, ebony belly bridge, dual black pickguards (stenciled "Harley-Davidson"), w-b-w double-bound, body, pearl headstock inlays of Gibson and H-D logos, nickel tuners, 100th Anniversary interior label, these guitars were originally sold at Harley dealerships, with certificate of authenticity, and black wooden OHSC (Harley orange lining) (SN:92294012)
20U-11547
$2,100.00
|
GIBSON HUMMINGBIRD (1966)
14 Photos
VG-EC with a repaired headstock crack / top crack and needs work (repair top center seam, reglue pickguard, reset neck, level and dress frets, strings, setup, etc. - sold AS-IS), 15-7/8" lower bout, square-shouldered D-shape, sunburst finished spruce top (appears to be oversprayed), cherry stained mahogany back and sides (sides appear to be slightly oversprayed), 14-fret mahogany neck, white-bound 20-fret rosewood fingerboard with pearl dual parallelogram inlays, 1-19/32" nut width, 25-1/2" scale, rosewood reverse belly bridge, plastic pickguard embosed with hummingbird and flower motif, white-bound body, pearl "Gibson" and crown headstock inlays, gold Kluson Deluxe tuners with single ring keystone buttons, with flat-lid HSC (black lining) (SN:405085)
20U-11535
$2,400.00
|
GIBSON J-50 ADJ (1964)
12 Photos
VG-EC, some pick wear on top between bridge and pickguard, finish on back of neck worn from capo use, 16" lower bout, sloped shoulders, natural finish, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard, pearloid dot inlays, 1-11/16" nut width, 24-3/4" scale, rosewood reverse belly bride with adjustable saddle, tortoise plastic pickguard, white-bound body, Kluson tuners, big sound, with arched-lid HSC (green lining) (SN:197491)
20U-11275
$2,685.00
|
GIBSON J-50 ADJ (1964)
13 Photos
VG-EC, 16" lower bout, sloped shoulders, natural finish, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearloid dot inlays, 1-11/16" nut width, 24-3/4" scale, 3-7/8" to 4-7/8" body depth, rosewood reverse belly bride has been plugged and a regular bone saddle installed (pro job, original parts in case), new bone nut, tortoise plastic pickguard, white-bound body, b-w top purfling, 3-on-a-plate Kluson Deluxe tuners, good sound! With economy thermoplastic SKB HSC (SN:214390)
20U-11764
$3,000.00
|
GIBSON J-50 ADJ (1965)
14 Photos
VG-EC, 16" lower bout, sloped shoulders, gloss natural finish, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearloid dot inlays, 1-11/16" nut width, 24-3/4" scale length, 4" to 4-7/8" body depth, Brazilian rosewood reverse belly bridge with adjustable saddle, tortoise plastic pickguard, white-bound body, b-w top purfling, guitar has had a neck reset at some point (pro job), some overspray on heel, fine sound, with OHSC (yellow lining) (SN:255543)
20U-11640
$3,200.00
|
GIBSON J-50 ADJ (1967)
16 Photos
EC except for repaired crack in lower bout, 16-1/4" lower bout, sloped shoulders, natural finish spruce top, mahogany back and sides with finish checking throughout, 14-fret mahogany neck, 20-fret rosewood fingerboard, pearloid dot inlays, 1-9/16" nut width, 24-3/4" scale, rosewood reverse belly bridge, tortoise plastic pickguard, white-bound body, b-w top purfling, 6 original individual open-gear tuners, chrome hardware, very clean, on consignment, with recent thermoplastic HSC (black lining) (SN:064179)
20U-11808
$2,500.00
|
GIBSON LC-1 CASCADE (2005)
14 Photos
EC, antique natural finish, 00-size, L-series small body with cutaway, solid Sitka spruce top, solid Indian rosewood back and sides, 14-fret mahogany neck20 frets, rosewood fingerboard with pearl dot inlays, black headstock overlay with pearl Gibson logo and crown inlay, open back Gotoh tuners with butterbean buttons, abalone rosette, 1-11/16" nut width, 24 3/4" scale, rosewood bridge, gold hardware, comes with unmounted tortoise plastic pickguard, Fishman Prefix Plus system, made in Montana, with OHSC (blue lining) (SN:00275028)
20U-11838
$1,750.00
|
GIBSON LG-1 (1956)
13 Photos
VGC+, here's a nice sounding player's LG-1, this guitar has seen some repairs and modification's over the years but is in great playing shape now, this guitar was professionally converted from ladder braced top to X-braced top, new maple bridge plate, it has a professionally repaired headstock and the neck is refinished, 2 repaired top cracks along edge of pickguard, one repaired back crack, new bone nut and saddle, replacement Kluson Deluxe tuners, sunburst finished spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearloid dot inlays, rectangular Brazilian rosewood bridge, 14-1/2" lower bout, 24-3/4" scale, 1-11/16" nut width, 3-1/2" to 4-3/8" body depth, endpin and strap button added, with import flat lid HSC (black lining), on consignment (SN:V7698-7)
20U-11930
$1,250.00
|
GIBSON LG-1 (1966)
15 Photos
VG-EC except for repaired cracks (glued and cleated, finish touched up) on the bass side bout, ladder braced natural finished spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearloid dot inlays, 1-19/32" nut width, 24-5/8" scale length, new birdge plate and replacement reverse belly bridge installed, white-bound body, tortoise plastic pickguard, 3-on-a-plate Kluson Deluxe tuners with white-plastic buttons, on consignment, with SSC (broken handle, black interior) (SN:381852)
20U-11843
$1,100.00
|
GIBSON LG-2 (1942-46)
13 Photos
VG-EC except needs work (reglue bridge, glue back center seam, glue pickguard, borderline for neck reset, strings, setup, etc. - sold AS-IS), 14-3/8" lower bout, sunburst finished X-braced spruce top, 14-fret mahogany neck, 19-fret Brazilian rosewood fingerboard with dot inlays, 1-3/4" nut width, 24-7/8" scale, white-bound body, tortoise plastic pickguard, Brazilian rosewood bridge with 2 dots, tortoise plastic pickguard, 3-on-a-plate open-gear riveted tuners with white-plastic buttons, banner headstock logo reads "ONLY A GIBSON IS GOOD ENOUGH", with SSC (blue interior) (SN:2395 12)
20U-11372
$3,500.00
|
GIBSON LUTHIER'S CHOICE AJ (ADVANCED JUMBO) (c.2004)
13 Photos
EC+, D-size, sloped shoulders, sunburst finished Adirondack spruce top with scalloped bracing, natural finished Brazilian rosewood sides and bookmatched back, 14-fret mahogany neck, 19-fret rosewood fingerboard with pearl chevron inlays, 1-3/4" nut width, 25.4" scale, 16" lower bout, 3-7/8" to 4-3/4" body depth, rectangular rosewood bridge with long saddle and 2 pearl dots, black peghead overlay with pearl prewar script "Gibson" logo and chevron inlay, firestripe pickguard, Waverly tuners with butterbean buttons, Gibson Custom Shop Decal on back of headstock, white-bound body and fretboard, w-b-w soundhole rosette, BIG sound, built in the Montana Custom Shop, with black Custom Art Historic OHSC (burgundy lining), on consignment (SN:WWBAJ001)
20U-11823
$6,000.00
|
GIBSON ORIGINAL JUMBO (2004)
15 Photos
EC- except for missing finish on back of neck, slope-shoulders, D-size, sunburst finish, Adirondack spruce top, mahogany back and sides, V-shaped 14-fret mahogany neck, 19-fret rosewood fingerboard with pearl dot inlays, 1-25/32" nut width, 24-3/4" scale, 16" lower bout, 4-1/8" to 4-3/8" body depth, rectangular rosewood bridge with long saddle and two pearl dot inlays, firestripe pickguard, white-bound body, pearl script "Gibson" headstock inlay, Gotoh vintage-style tuners with butterbean buttons, Custom Shop decal on back of headstock, good sound, with black Custom Art Historic OHSC (burgundy lining), on consignment (SN:00064008)
20U-11881
$2,300.00
|
GIBSON SHERYL CROW SIGNATURE MODEL (2003)
14 Photos
EC+, square shoulder dreadnought, antique natural finish on solid Sitka spruce top, heritage cherry finished solid mahogany back and sides, mahogany neck with bound rosewood fingerboard, 20 frets, parallelogram inlays, black headstock overlay with pearl Gibson and crown inlay, white-bound front and back with b-w-b-w-b top purfling, hummingbird style tortoise pickguard without the artwork, rosewood reverse belly bridge, individual covered nickel tuners with white buttons, 24-3/4" scale, replica of Sheryl's prized 1962 Gibson Country Western and has her signature on the label, 1-3/4" nut width, made in Montana, with OHSC (blue lining) (SN:02433009)
20U-11803
$1,625.00
|
GIBSON SJ-100 (1939-40)
22 Photos
VGC+, Can you say rare, rare, rare? one of only 79 built in the first two years of production (only 138 were built from 1939-1941), Awesome pre-war guitar! Sunburst finish, jumbo body, spruce top, mahogany back and sides, 2-piece 14-fret maple neck with dark center strip, 20-fret ebony fingerboard with pearl dot inlays, ebony open moustache bridge with individual "adjustable bearings" (saddles) for each string, "shoulder" tortoise plastic pickguard, white-bound body and fretboard, b-w top purfling, stairstep headstock with script "Gibson" logo inlaid in pearl, 17" lower bout, 3-7/8" to 4-1/2" body depth, 26" scale, 1-3/4" nut width, original chrome Sealfast tuners, much tender loving care has been administered to refurbish this guitar to it's present glory (spruce top patch under fretboard extension and several repaired top cracks in the same area, neck reset, refretted, new nut, bridge string slots filled, repaired back cracks near neck block, repaired pickguard crack, one large top ding, finish touchup throughout repaired areas), period strap holders installed on back of headstock and near endpin, Custom engraving on truss rod cover reads "L.W.S.", this model was surpassed only by the SJ-200 in it's day, excellent sound so you can play Country like a "Singing Cowboy" or the Blues like Lonnie Johnson! With worn but solid brown OHSC (plush burgundy lining), on consignment
20U-11779
$55,000.00
|
GOODALL AKGC KOA GRAND CONCERT (recent)
13 Photos
EC+, all solid wood construction, sitka spruce top, koa back, sides, and headstock veneer, 14-fret mahogany neck, pheasant wood bridge and fretboard (looks a bit like wenge), 20 frets, pearl dot inlays, 1-3/4" nut width, 25-1/2" scale, 15-1/8" lower bout, 3-3/4" to 4-1/4" body depth, black-bound body and fretboard, wood top purfling, clear pickguard, chrome Gotoh tuners, agoya shell soundhole rosette, pearl winged "G" headstock logo, handmade in Hawaii, good sound, with OHSC (green lining) (SN:4643)
20U-11762
$2,750.00
|
GOODALL AKJ KOA JUMBO (recent)
13 Photos
EC+, all solid wood construction, sitka spruce top, nicely figured koa back, sides, and headstock veneer, 14-fret mahogany neck, pheasant wood bridge and fretboard (looks a bit like wenge), 20 frets, pearl dot inlays, 1-3/4" nut width, 25-1/2" scale, 17" lower bout, 4" to 4-1/2" body depth, black-bound body and fretboard, wood top purfling, clear pickguard, chrome Gotoh tuners, agoya shell soundhole rosette, pearl winged "G" headstock logo, handmade in Hawaii, nice airy sound, with TKL OHSC (burgundy lining), on consignment (SN:AKJ3326)
20U-11755
$2,700.00
|
GOODALL AMHS MAHOGANY STANDARD (1997)
13 Photos
EC, 16" lower bout, sloped shoulders, natural gloss finish, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with pearl dot inlays, 1-3/4" nut width, 25-1/2" scale, 4" to 4-5/8" body depth, rosewood bridge, clear pickguard, paua shell rosette, maple body and fretboard binding, flamed koa headstock overlay with "winged G" inlay, chrome Gotoh tuners, bone nut and saddle installed, Fishman Rare Earth Blend pickup / microphone system installed, handcrafted in Kailua-Kona, Hawaii, with tweed-like arched-lid HSC (red lining) (SN:4-10-07)
20U-11877
$2,250.00
|
GOODALL RS 1601 (c.1998)
13 Photos
EC+, D-size, 16" lower bout, gloss natural finish, spruce top, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with slotted diamond abalone inlays, 1-13/16" nut width, 25-1/2" scale length, curly koa body, neck and headstock binding, ebony bridge, abalone soundhole rosette, ebony headstock overlay with pearl and abalone inlays, chrome chrome Schaller tuners with metal buttons, active Fishman Matrix pickup installed, very fine sound, made in Hawaii, on consignment, with Geib-style OHSC (blue lining)
20U-11894
$3,200.00
|
GOODALL TR000-12S
13 Photos
EC+, 000-body size, Master grade Adirondack spruce top with scalloped bracing, Indian rosewood back and sides, 12-fret neck with slotted headstock, 20-fret ebony fingerboard with slotted square inlays, ebony bridge, maple body and headstock binding, herringbone top purfling and soundhole rosette, tortoise plastic pickguard, ebony peghead overlay with winged "G" logo, Waverly Sloane tuners with ebony buttons, 15-1/4" lower bout, ~25" scale, 1-13/16" nut width, 3-3/4" to 4-1/8" body depth, bone saddle, fossilized ivory nut, very nice sound, with newer Geib-style Goodall HSC (green lining), on consignment (SN:3779)
20U-11647
$3,850.00
|
GRIT LASKIN JUMBO "THE PITCH" (2003)
13 Photos
EC++, 16-1/2" lower bout, gloss natural finish, Sitka spruce top, Indian rosewod back and sides with contoured Laskin armrest, 14-fret mahogany neck, 21-fret ebony fingerboard with offset abalone dot inlays, 1-3/4" nut width, 25-5/8" scale, ebony bridge, clear pickguard, ebony-bound body with maple-ebony-maple side and back purfling and m-e-m-rosewood top purfling (extending around fingerboard extension), elaborate inlaid rosette with two rings of abalone purfling, chrome Schaller tuners with ebony buttons, wonderful sound, and topped off with one of Laskin's incredible signature inlays: a baseball pitcher in mid-throw, right foot extended to mid first fret, with a background of a blue sky, back fence, and coincidentally, an Elderly Instruments billboard. This amazingly realistic work of art is executed in mother-of-pearl, gold mother-of pearl, Walrus Ivory, Lapis, Mexican turquoise, Red Coral, Orange Spiney shell, Tahitian Blacklip pearl, gold, and Obsidian. The artistic nature of Grit's inlays truly must be seen to be appreciated, and like all of Grit's guitars, this sounds great too, with custom Calton HSC
20U-9619
$8,500.00
|
GUILD GAD-30E (recent)
14 Photos
EC+ orchestra model in ice tea burst, solid spruce top, scalloped braces, 15-1/4" lower bout, 3-1/4" to 4" body depth, solid mahogany sides and back, 20 fret rosewood fretboard, pearl dot inlays, 25-1/2" scale, 1-3/4" nut, rosewood bridge, bone nut and saddle, wood bindings, Chesterfield headstock logo, nickel open-back vintage style tuners, butterbean buttons, tortoise plastic pickguard, Fishman Matrix I pickup, with OHSC (black lining) made in China (SN:GAD-11024)
20U-11706
$665.00
|
GUILD GAD-50 (recent)
14 Photos
EC, D-size, gloss 2-color sunburst finish, all solid wood, spruce top with scalloped bracing, Indian rosewood back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with vintage style inlays, rosewood bridge, rosewood peghead overlay with "Guild" logo and Chesterfield inlay, wood body bindings, b-w-b-w top purfling, fancy backstrip, tortoise plastic pickguard, 25-1/2" scale, 1-11/16" nut width, 15-5/8" lower bout, 3-3/4" to 4-3/4" body depth, chrome Grover Rotomatic tuners, small (1/4" X 1/4") spot where dark finish is rubbed through to the wood, clear finish covers this spot, real nice import guitar, made in China, with OHSC (black lining) (SN:GAD-29522)
20U-11900
$550.00
|
GUILD JF30 (1999)
14 Photos
EC, jumbo-size, 17" lower bout, gloss sunburst finish, solid spruce top, flamed-maple sides and arched back, 14-fret maple neck, 20-fret rosewood fingerboard with dot inlays, 1-11/16" nut width, 25-1/2" scale, rosewood bridge, tortoise plastic pickguard, white-bound body with b-w-b-w top purfling, gold Grover Rotomatic tuners, Chesterfield headstock inlay, neck block stamped "OCT 26 1999" made in Westerly, RI, with flat-lid OHSC (gray lining) (SN:AJ301027)
20U-11853
$1,100.00
|
HARMONY STELLA MODEL H928 (1960's)
17 Photos
VGC except needs work (repair missing chunk in back, fix separating back seams, replace missing bridge, new nut, refret to straighten bowed neck, restring and setup, etc. - sold AS-IS) 0-size, 13-1/8" lower bout, striped blond finish, 12-fret neck, solid headstock, 18-fret fingerboard with silkscreened "inlays", 1-3/4" nut width, ~24" scale, painted on top purfling and soundhole edge, tortoise plastic pickguard, trapeze tailpiece, 3-on-a-plate open-gear tuners, built in the USA, a wall hanger in a rare color that looks OK from the front, with brown OSSC (missing handle) (SN:3453H928)
20U-11613
$40.00
|
HUSS & DALTON TOM-M CUSTOM (2007)
12 Photos
EC+, here's a visually stunning guitar from our friends at Huss & Dalton, gloss black finish, Adirondack spruce top with scalloped bracing, mahogany back and sides, grained ivoroid-bound body, fretboard and headstock, abalone top purfling and soundhole rosette, abalone torch headstock inlay, 14-fret mahogany neck, 20-fret ebony fingerboard with snowflake inlays, ebony bridge, chrome Waverly tuners with butter bean buttons, 15-1/8" lower bout, 3-3/8" to 4-1/4" body depth, 24.9" scale (short scale), 1-3/4" nut width, 2-3/16"string spacing at the saddle, guitar is signed and dated under top, great guitar! with tweed OHSC (brown lining), on consignment (SN:2136)
20U-11509
$4,800.00
|
JAMES OLSON JUMBO CUSTOM (1996)
11 Photos
EC, jumbo body, 17" lower bout, 3-7/8" to 4-3/4" body depth, nice tight-grained spruce top, Indian rosewood back and sides, 5-piece 14 fret mahogany-maple-rosewood-maple-mahogany neck, 20 fret ebony fingerboard with snowflake inlays, ebony bridge, abalone top purfling and soundhole rosette, black pickguard, tortoise plastic body binding, wood back purfling, herringbone backstrip, ebony peghead overlay with maple-ebony-maple border and pearl "O" inlay, gold Schaller tuners, ebony truss rod cover, 25.4" scale, 1-3/4" nut width, excellent sound! Beautifully handcrafted in Minnesota, Fishman Matrix pickup installed, with Calton Deluxe HSC (gray with red lining), on consignment (SN:603)
20U-9446
$12,000.00
|
KINSCHERFF HIGH NOON KOA CUTAWAY (2000)
13 Photos
EC, small jumbo body size, sharp cutaway, gloss natural finish, spruce top, highly figured koa back and sides, unique ebony bridge, 14-fret mahogany neck, 20-fret ebony fingerboard with wave inlay at 12th fret, 1-3/4" nut width, 25-1/2" scale, 16" lower bout, 3-11/16" to 4-9/16" body depth, rosewood-bound body and fretboard, w-blue-w-b-w-b top purfling, abalone soundhole rosette, gold Gotoh tuners, striped ebony headstock overlay with wave and planet inlays, handcrafted in U.S.A. by Jamie Kinscherff, dated 3/8/2000 and signed by Jamie under top, excellent sound! on consignment, with TKL HSC (burgundy lining) (SN:0185)
20U-11912
$3,500.00
|
LARRIVEE 30TH ANNIVERSARY MODEL (1997)
14 Photos
EC+, Limited Edition, #14 of 100, based on the C-10 model with custom appointments, gloss natural finish, sharp cutaway, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard with fancy pillar with bow and floral tree, ebony bridge with floral inlays, Brazilian rosewood peghead overlay with border and very elaborate inlay of a woman looking in a mirror, banner on inlay reads "1967 - 1997", abalone top purfling and soundhole rosette, clear pickguard, chrome tuners, wood body bindings and purflings, 16-1/8" lower bout, 3-5/8" to 4-1/2" body depth, ~25-5/8" scale, 1-23/32" nut width, L.R. Baggs active I-beam pickup installed with 1/4" endpin jack, inside label is signed, very nice guitar (which Larrivee tells us would have a list price of $12,000 if they made on today)! Built in Canada, with black faux snakeskin OHSC (green lining), on consignment -price reduced (SN:14-19963)
20U-11698
$5,700.00
|
LARRIVEE D-03 (recent)
13 Photos
EC+, satin natural finish, solid spruce top, solid mahogany back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard, micro dot inlays, 1-23/32" nut width, 25-5/8" scale, ebony bridge, clear plastic pickguard, black plastic bound body, ebony headstock overlay, chrome tuners, made in British Columbia, with flat-lid OHSC (black lining) (SN:06697)
20U-11848
$725.00
|
LARRIVEE L-05 (recent)
13 Photos
EC+, 16-1/4" lower bout, gloss natural finish, solid spruce top, solid mahogany back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret ebony fingerboard, micro-dot inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, clear pickguard, abalone rosette, flamed maple-bound body, b-w-b purfling, ebony headstock overlay with silver trim and pearl "Larrivee" logo, chrome tuners, made in the USA, with arched-lid OHSC (black lining) (SN:62184)
20U-11720
on hold...$1,150.00
|
LARRIVEE SD-60 (recent)
12 Photos
EC+, 15-3/8" lower bout, D-size with sloped shoulders, solid spruce top with large soundhole, solid Indian rosewood back and sides, 12-fret mahogany neck with slotted headstock, ivoroid-bound 18-fret ebony fingerboard with pearl diamond inlays, 1-29/32" nut width, 25-5/8" scale, ebony pyramid bridge, tortoise plastic pickguard, flame maple body binding, herringbone top purfling, abalone soundhole rosette, rosewood peghead overlay with pearl "Larrivee" logo inlay, nickel open-gear tuners with ebony buttons, made in the U.S.A., on consignment, with arched-lid OHSC (black lining) - price reduced (SN:70994)
20U-11579
$1,790.00
|
LINE 6 VARIAX 700 ACOUSTIC (recent)
11 Photos
EC except for one spot on lower bout where finish has faded, natural finish, rounded cutaway, spruce top, chambered mahogany body, 14-fret mahogany neck, 24-fret rosewood fingerboard, slotted diamond inlays, 1-23/32" nut width, 25-1/2" scale, rosewood bridge, cream-bound top, chrome tuners, piezo bridge saddles interface with Line 6's software to provide a wide palette of acoustic (guitar, resonator, banjo, even shamisen and sitar) sounds, with power supply / DI box and gigbag (SN:04030254)
20U-11831
$825.00
|
LOWDEN S32 (c.1988)
13 Photos
EC, about 00-size, ~14-5/8" lower bout, natural satin finish, spruce top, rosewood back and sides, 5-piece 14-fret mahogany neck with rosewood stringers, 20-fret ebony fingerboard with side dot position markers, 1-3/4" nut width, 25-1/2" scale, pinless rosewood bridge, clear pickguard, abalone soundhole rosette, maple-bound body, ebony-maple-mahogany top purfling and on each side of rosette, rosewood peghead overlay, gold tuners with amber pearloid buttons, hancrafted in Ireland, with thermoplastic OHSC (mauve lining) (SN:11889)
20U-11846
$2,300.00
|
MATON C185 CUSTOM JUMBO (recent)
11 Photos
EC+, gloss natural finish, all solid woods, spruce top, blackwood back and sides, 14-fret maple neck, 21-fret rosewood fingerboard with dot inlays, rosewood bridge, herringbone top purfling and soundhole rosette, black pickguard, gold tuners, 16" lower bout, 4" to 5" body depth, 25.5" scale, 1-23/32" nut width, similiar to AJ85, nice workmanship, built in Australia, with Hiscox thermoplastic OHSC (mauve lining) (SN:191 (0701))
20U-11464
$1,650.00
|
MCELROY 00 (2005)
12 Photos
EC+, 00-size, 14-1/4" lower bout, natural finish, Sitka spruce top with nice bearclaw figure, flamed acacia back and sides, 12-fret mahogany neck, 19-fret ebony fingerboard with micro-dot inlays, 1-25/32" nut width, 24-7/8" scale length, ebony bridge, black-bound body, fingerboard and headstock with maple purfling, gold Grover open-gear tuners with butterbean buttons, rosewood headstock overlay with ivoroid "McElroy" inlay, handcrafted in Seattle, WA., fine sound, with arched-lid HSC (burgundy lining) (SN:50100)
20U-11266
$2,400.00
|
MERRILL 12-FRET C-18 PROTOTYPE (recent)
14 Photos
EC, D-size, 15-5/8" lower bout, natural finished Adirondack spruce top with scalloped bracing and high X-brace, slotted-headstock Honduran mahogany back and sides, 12-fret mahogany neck, 20-fret ebony fingerboard with dot inlays, 1-7/8" nut width, 25-3/8" scale, ebony bridge, bone nut and saddle, tortoise plastic pickguard, rosewood body binding, w-b-w-b top purfling, Brazilian rosewood headstock overlay, open-gear Waverly tuners with ivoroid buttons, fine sound, refretted in our shop, neck block stamped "PROTOTYPE / MC C-16 / 12FT / 000174", with arched-lid OHSC (brown lining) (SN:000174)
20U-11773
$4,200.00
|
MORGAN CONCERT CUTAWAY (recent)
14 Photos
EC+, J-size, 16" lower bout, 4-1/2" body depth, natural finish spruce top, flamed koa back and sides, 14 fret one piece mahogany neck with ivoroid bound ebony fingerboard, 20 frets, "Elephant" inlay pattern reaches from headstock face to the 12th fret, abalone rosette, rosewood binding with abalone purfling, ebony bridge, tortoise plastic pickguard, chrome "Morgan" engraved Gotoh tuners with metal buttons, active bridge pickup installed with endpin jack, 1-3/4" nut width, 25-1/2" scale, made in Canada, on consignment, with arched-lid HSC (gray lining) (SN:815)
20U-11892
$3,500.00
|
NATIONAL N-720 (c.1967-68)
15 Photos
VG-EC except for repaired headstock seams, gloss natural finish, D-size, solid spruce top, X-braced, mahogany back and sides, bolt-on 14-fret maple neck, 19-fret rosewood fingerboard with pearloid block inlays, zero-fret, "Gumby"shaped headstock with raised "National" logo, 3-on-a-plate Kluson Deluxe tuners with large tulip shaped buttons, unique "long horn" wood bridge, large 3-point tortoise plastic pickguard, interesting soundhole rosette, white-bound body and fretboard, b-w-b-w top purfling, 15-5/8" lower bout, 3-1/2" to 4" body depth, 25.5" scale, 1-11/16" nut width, short lived model built by Kay when it was owned by Valco (Supro, National), armrest and replacement truss rod cover added, kind of Southwestern vibe, with very rough SSC, on consignment
20U-11663
$800.00
|
NORMAN B20 FOLK (recent)
10 Photos
EC except needs minor work (minor fret level, strings, setup, etc. - sold AS-IS), 14-3/4" lower bout, folk-size, satin finish, solid spruce top, cherry back and sides, 14-fret maple neck (neck has been nicely re-shaped to a "V"), 21-fret rosewood fingerboard with pearl dot inlays, 1-11/16" nut width, 24-7/8" scale length, rosewood bridge, soundhole rosette, chrome tuners, made in Canada (SN:05202693)
20U-11102
$250.00
|
OVATION 1771LX BALLADEER (2006)
12 Photos
EC, 15-7/8" lower bout, rounded cutaway, bound cherry cherryburst (solid) Sitka spruce top, enhanced scalloped LX bracing, mid depth bowl, 14-fret mahogany neck, rosewood fretboard, dot inlays, 1-11/16" nut width, 25.4" scale, pinless rosewood bridge, fancy rosette, chrome tuners, OP-PRO SERIES onboard pickup / preamp with built in tuner, with thermoplastic OHSC (black lining) (SN:605203)
20U-11908
$500.00
|
OVATION 1778T ELITE (2006)
12 Photos
EC++, 15-13/16 lower bout, single cutaway, mid-depth bowl body, textured lusty red finish, solid spruce top with 11 small soundholes on bass side upper bout, two-piece maple neck, 1-11/16" nut width, 25-1/4" scale length, black tuners, ebony bridge, Ovation OP-Pro Series onboard pickup system with built-in tuner, made in New Hartford, Connecticut, with OHSC (SN:603914)
20U-11015
$725.00
|
OVATION CC057 CELEBRITY (recent)
12 Photos
VG-EC except needs work (replace battery, recut bridge slot to lower action, saddle is as low as it can go, etc. - sold AS-IS), acoustic-electric, rounded cutaway, mahogany finish spruce top, super shallow bowl, 14-fret bound mahogany neck, rosewood fretboard, dot and diamond inlays, 20 frets, pinless walnut bridge, chrome tuners, under saddle pickup, built in Korea, 1-11/16" nut, 25-1/2' scale, with gigbag (SN:1113194)
20U-11870
$200.00
|
OVATION S771 BALLADEER SPECIAL (recent)
12 Photos
EC, acoustic-electric, mid-depth bowl, autumn burst satin finish on bound solid spruce top, mahogany neck, rosewood fretboard, side dots, 20 frets, under saddle pickup with OP-30 preamp, great working man's guitar, Ovation roto style tuners, 1-11/16" nut, 25-1/2" scale, with OHSC (SN:S71269)
20U-11827
$585.00
|
OVATION STANDARD BALLADEER 1861-LX (recent)
12 Photos
EC+, acoustic-electric, rounded cutaway, super shallow bowl, white bound gloss red-burst finish, b-w-b top purfling, satin finished mahogany neck, bound rosewood fingerboard, dot markers, 20 frets, pinless walnut bridge, factory pickup system with 3 band EQ and built-in tuner, chrome tuners, 1-11/16" nut, 25-1/2" scale, made in USA, with black thermoplastic OHSC (black lining) (SN:607534)
20U-11651
$735.00
|
RANDALL KRAMER BIG SKYE (2005)
12 Photos
EC+ with a small finish flaw on back, 14-5/8" lower bout, solid spruce top with nice bearclaw figure, solid Brazilian rosewood back and sides, 14-fret mahogany neck, rosewood-bound ebony fingerboard, 1-25/32" nut width, 25-1/2 scale length, ebony bridge, koa top purfling, fancy rosette, rosewood-bound body and headstock, Brazilian rosewood headstock overlay with abalone and pearl inlay, Brazilian rosewood backstrap, chrome Gotoh 510 Super Machine Head tuners with black chrome buttons, handcrafted in California, fine sound, on consignment, with tweed HSC (green lining) (SN:024)
20U-11399
$5,000.00
|
RANDY LUCAS LD-28 (1996)
12 Photos
EC-, D-size, 15-1/2" lower bout, gloss natural finish, Adirondack spruce top, scalloped bracing, forward-shifted X-brace, Brazilian rosewood back and sides, 14-fret mahogany neck (slight V-shape), 20-fretebony fingerboard with slotted diamond inlays, "Lucas" inlay at 12th fret, 1-23/32" nut width, 25-3/8" scale, ebony bridge with long saddle, tortoise plastic pickguard, ivoroid-bound body and headstock, herringbone top trim, Brazilian rosewood headstock overlay with pearl torch inlay, nickel tuners, handcrafted by Randy Lucas, fine sound, on consignment, with arched-lid HSC (black lining) (SN:015-2)
20U-11354
$6,000.00
|
RICH & TAYLOR CUSTOM BRAZILIAN (recent)
12 Photos
EC, D-size, 15-5/8"lower bout, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with fancy pearl and abalone engraved leaf inlays, 1-3/4" nut width, 25-5/16" scale length, ebony bridge, white-bound body, fingerboard and headstock, abalone top, back and side purfling, abalone pickguard, fancy headstock inlays, gold tuners, handcrafted in Tennessee, fine sound, label signed by Greg Rich, Mark Taylor and Chris Bozung, with flat-lid HSC (black lining) (SN:9402-010)
20U-11437
$5,500.00
|
ROCKBRIDGE DREADNOUGHT (recent)
13 Photos
EC+, D-size, ~15-1/2" lower bout, 3-15/16" to 4-15/16" body depth, gloss finished red spruce top and premium Brazilian rosewood back and sides, tortoise plastic binding on the front, back, fingerboard and headstock, herringbone top purfling and rosette, 14-fret mahogany neck with hand rubbed satin finish, 21 fret ebony fingerboard with abalone snowflake inlays, Brazilian rosewood headstock overlay with pearl logo inlay, open back gold Waverly tuners with butterbean buttons, ebony bridge, fossil ivory nut and saddle saddle, Greven(?) tortoise plastic pickguard, 1-11/16" nut width, ~25-1/8" scale, made in USA, with arched-lid HSC (burgundy lining) (SN:69/05)
20U-11871
$5,000.00
|
SAMUELSON SMALL JUMBO (2002)
12 Photos
VG-EC except for one repaired top crack, gloss natural finish, 16" lower bout, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, 19-fret ebony fingerboard with surfboard shape inlays, ebony bridge, herringbone top purfling and soundhole rosette, wood body binding, curly maple headstock overlay, gold tuners, 25.5" scale, 1-23/32" nut width, built in the U.S.A. by Rick Samuelson, on consignment (SN:#7)
20U-11660
$700.00
|
SANTA CRUZ H-13 (2003)
18 Photos
EC- with a minor finish bubble in front of bridge, #7 out of a run of 15, 14-3/4" lower bout, sunburst finished spruce top, mahogany back and sides, 13-fret mahogany neck with slotted headstock, 21-fret ebony fingerboard, 1-3/4" nut width, 25.4" scale length, 3-7/8" to 4-3/4" body depth, rectangular ebony bridge, firestripe pickguard, ivoroid-bound body, ebony headstock overlay, gold vintage-style tuners with butterbean buttons, passive under-saddle pickup installed with 1/4" endpin jack, fine sound, with arched-lid OHSC (burgundy lining), on consignment (SN:660 7/15)
20U-11887
$3,400.00
|
SANTA CRUZ TONY RICE (1998)
13 Photos
EC except for repaired crack on lower treble side, 15-5/8" lower bout, gloss natural finish, spruce top, Indian rosewood back and sides, 14-fret mahogany neck, ivoroid-bound 21-fret ebony fingerboard, pearl "SCGC" inlay at 12th and 13th frets, 1-23/32" nut width, 25-3/8" scale, large (4-1/4" diameter) soundhole with herringbone rosette, ebony bridge, tortoise plastic pickguard, ivoroid-bound body, herringbone top trim and rosette, ebony peghead overlay without inlays, nickel Waverly open-gear tuners with butterbean buttons, very fine sound, with arched-lid HSC (blue lining) (SN:2998R)
20U-11869
$3,100.00
|
SANTA CRUZ TONY RICE CUSTOM (2007)
12 Photos
EC+, D-size, gloss natural finish, European spruce top with large soundhole, Indian rosewood back and sides, 14-fret V-shaped mahogany neck, ivoroid-bound 21-fret ebony fingerboard, pearl "SCGC" inlay at 12th-13th frets, 1-3/4" nut width, 25-3/8" scale, ebony bridge, tortoise plastic pickguard, ivoroid-bound body, herringbone top trim and rosette, zipper back strip, Brazilian rosewood peghead overlay, ivoroid heelcap, nickel Waverly butterbean tuners, with arched-lid HSC (burgundy lining) (SN:5505R)
20U-11739
$3,100.00
|
SANTA CRUZ VINTAGE ARTIST (recent)
13 Photos
EC with ~4" scrape on top (not through finish - see photos), D-size, gloss natural finish, spruce top, wild looking sycamore back and sides, 14-fret mahogany neck, 21-fret ebony fingerboard, micro dot inlays, 1-23/32" nut width, 25-3/8" scale, ebony bridge, tortoise plastic pickguard, koa-bound body, herringbone top trim, sycamore headstock overlay, pearl "SCGC" logo, gold open-gear tuners with butterbean buttons, Fishman Matrix pickup installed, with arched-lid HSC (blue lining) (SN:4704)
20U-10741
$2,900.00
|
SANTA CRUZ VINTAGE ARTIST ROSEWOOD (c.2000)
14 Photos
EC with repaired top cracks, D-size, 15-5/8" lower bout, spruce top with high X-brace, rosewood back and sides, 14-fret mahogany neck, 21-fret ebony fingerboard with micro-dot inlays, 1-23/32" nut width, 25-1/2" scale length, ebony bridge, ivoroid-bound body, fingerboard and headstock, tortoise plastic pickguard, Brazilian rosewood peghead overlay, nickel Waverly tuners with butterbean buttons, fine sound, with arched-lid HSC (blue lining) (SN:2679)
20U-11206
$3,100.00
|
SAWCHYN SSJ-83 (recent)
12 Photos
EC+, 16-1/8" lower bout, rounded cutaway, spruce top with bearclaw figure, mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with slotted diamond abalone inlays, 1-25/32" nut width, 25-5/8" scale length, ebony bridge, fancy rosette, clear plastic pickguard, ivoroid-bound body, fingerboard and headstock, chrome Schaller tuners with ebony buttons, ebony headstock overlay with abalone "S" inlay, handcrafted in Canada, fine sound, with tweed HSC (brown lining) (SN:00411)
20U-11497
$2,200.00
|
SEAGULL S6 PLUS SPRUCE (2005)
15 Photos
EC- except could use minor work (polish frets, restring and set up, etc. - sold AS-IS), S-Series, acoustic-electric, D-size, satin natural finish, solid spruce top, cherry back and sides, 14-fret maple neck, 21-fret rosewood fingerboard with dot inlays, 24.9" scale length, 1-13/16" nut width, 16" lower bout, 4" to 4-7/8" body depth, rosewood bridge, tortoise plastic pickguard, chrome tuners, factory Godin Quantam pickup system installed, cream-bound body, built in Canada, with with Roadrunner thermoplastic HSC (green lining) (SN:05395543)
20U-11925
$350.00
|
TACOMA DBZ20 (2002)
19 Photos
VG-EC except for one repaired back crack, gloss natural finish, spruce top, Brazilian rosewood back and sides, 14-fret mahogany neck, all solid woods, 20-fret rosewood fingerboard with dot inlays, rosewood bridge, rosewood peghead overlay with ivoroid "TACOMA" logo, ivoroid-bound body and headstock, fancy wood marquetry top purfling, abalone soundhole rosette, clear pickguard, chrome tuners, 15-7/8" lower bout, 25.5" scale, 3-7/8" to 4-3/4" body depth, 1-3/4" nut width, built in the U.S.A., with black flat-lid OHSC (tan lining), on consignment - price reduced (SN:F0590170)
20U-11286
$1,250.00
|
TACOMA DM9 (2001)
12 Photos
EC except needs work (glue fingerboard extension, fill back of bridge, level and dress frets, strings, setup, etc. - sold AS-IS), D-size, 15-3/4" lower bout, natural satin finish, all solid woods, spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with abalone dot inlays, 1-3/4" nut width, 25-5/8" scale, rosewood bridge, tortoise plastic-bound body and fretboard, clear plastic pickguard, chrome tuners, 4-color herringbone soundhole rosette, with black OHSC (tan lining) (SN:E0990040)
20U-11575
$425.00
|
TACOMA DR-20 (2001)
11 Photos
EC except needs work (install new nut, level and dress frets, strings, setup, etc. - sold AS-IS), D-size, gloss natural finish, solid spruce top, solid rosewood back and sides, 14-fret mahogany neck, ivoroid-bound 20-fret rosewood fingerboard with abalone dot inlays, 1-13/16" nut width, 25-1/2" scale, rosewood bridge, abalone soundhole rosette, ivoroid-bound body, 4-color wood herringbone pattern top trim, chrome tuners, rosewood peghead overlay with vertical "Tacoma" logo (SN:E1220190)
20U-11571
$550.00
|
TACOMA PAPOOSE P-2 MINI GUITAR (2000)
10 Photos
EC- except needs work (reglue 2 loose top braces, repair finish ding in top, dress frets, setup, etc. - sold AS-IS), 11" lower bout, natural satin finish, solid cedar top with offset soundhole, rosewood back and sides, bolt-on mahogany neck, 21-fret rosewood fingerboard with dot inlays, 1-7/8" nut width, ~19-1/4" scale, pinless rosewood bridge, clear pickguard, chrome tuners, tuned A to A (like a regular guitar with capo at 5th fret), made in the U.S.A. (SN:D2665150)
20U-11832
$350.00
|
TAKAMINE EF360SC (2006)
14 Photos
EC+, cutaway dreadnought body, 15-3/4" lower bout, solid spruce top, rosewood sides and back, mahogany neck with 20 fret bound rosewood fingerboard, wood and acrylic mirror inlays, 1-11/16" nut width, 25-1/2" scale, rosewood headstock veneer with abalone logo, maple, koa and gold mirror rosette, rosewood bridge, tortoise plastic pickguard, CT4B preamp, gold tuners, natural finish, made in Japan, with brown OHSC (green lining) (SN:06080820)
20U-11817
$985.00
|
TAYLOR 110E (2003)
13 Photos
EC except for 2 long repired cracks in side near preamp and needs some work (dress frets, reset neck, replace battery, setup, etc. sold AS-IS), D-size, 15-7/8" lower bout, satin natural finish, solid spruce top, laminated sapele sides and arched back, 14-fret mahogany neck, 20-fret ebony fingerboard with dot inlays, 1-11/16" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, black-bound body, Fishman Classic 4 pickup and preamp, chrome tuners, with gigbag (SN:20030710815)
20U-11830
$375.00
|
TAYLOR 114 (2007)
13 Photos
EC except needs some work (polish frets, etup, etc. - sold AS-IS), 15-3/4" lower bout, grand auditorium size, satin natural finish, solid Sitka spruce top, laminated sapele sides and arched back, 14-fret mahogany neck, 20-fret fingerboard with dot inlays, 1-11/16" nut width, 25-1/2" scale length, rosewood bridge, tortoise plastic pickguard, black-bound body, rosewood headstock overlay, chrome tuners, with tan Taylor gigbag (SN:200705118835)
20U-11864
$425.00
|
TAYLOR 710 (1988)
13 Photos
VG-EC with two repaired cracks on top at end of fingerboard, 16" lower bout, D-size, gloss natural finish, spruce top, rosewood sides and 3-piece back, 14-fret mahogany neck, black-bound 20-fret ebony fingerboard, abalone dot inlays, 1-23/32" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, black-bound body, chrome Schaller tuners, with flat-lid HSC (gray lining) (SN:6052)
20U-11537
$1,400.00
|
TAYLOR 814-CE (2001)
14 Photos
EC- with a repair to the lower bout treble side and a minor finish crack on top, grand auditorium size, 15-7/8" lower bout, gloss natural finish, spruce top, rosewood back and sides, 14-fret mahogany neck, white-bound 20-fret ebony fingerboard, modern pearl inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic pickguard, abalone soundhole rosette, white-bound body, white-bound headstock with pearl "Taylor" inlay, gold Grover Rotomatic tuners, factory onboard Fishman Prefix Stereo Blender, blue Alvarez HSC (blue lining) (SN:20010227142)
20U-11110
$2,150.00
|
TAYLOR 815-C (1995)
12 Photos
EC-, 17-1/8" lower bout, jumbo-size, sharp cutaway, solid spruce top, solid rosewood back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with fancy pearl inlays, 1-11/16" nut width, 25-1/2" scale length, ebony bridge, tortoise plastic pickguard, abalone rosette, white-bound body, fingerboard and headstock, gold Grover Rotomatic tuners, active Fishman Matrix transducer installed, with brown OHSC (raspberry lining) (SN:951205130)
20U-11479
$2,500.00
|
TAYLOR DN5 (2007)
13 Photos
EC+, D-size, 15-7/8" lower bout, gloss natural finish Sitka spruce top, mahogany back and sides, satin finished mahogany neck with ebony fingerboard, pearl dot inlays, 20 frets, ivoroid bound body and fretboard, abalone rosette, ebony bridge, gold Taylor sealed back tuners, 1-3/4" nut width, 25-1/2" scale, made in USA, with brown HSC (burgundy lining) (SN:20070207105)
20U-11931
$1,650.00
|
TAYLOR GSMC (2006)
13 Photos
EC, GS Series, 16-1/4" lower bout, Western red cedar top, Tropical American mahogany back and sides, 14-fret mahogany neck, 20-fret ebony fingerboard with abalone dot inlays, 1-3/4" nut width, 25-1/2" scale length, 3-3/4" to 4-3/8" body depth, ivoroid-bound body and fretboard, ebony bridge, abalone soundhole rosette, rosewood peghead overlay with pearl "Taylor" logo, gold tuners, clear pickguards added, made in California, with brown faux-gator OHSC (brown lining), on consignment (SN:20060817152)
20U-11837
$1,450.00
|
TAYLOR GSST LIMITED EDITION (2000)
15 Photos
EC+, Gallery Series "Sea Turtles" Limited Edition, #49 of 100, grand auditorium size, 15-3/4" lower bout, natural finish spruce top and quilted-maple back and sides, 14 fret maple neck with tortoise plastic bound ebony fingerboard, pearl and abalone inlay of two sea turtles swims across the upper fingerboard, 20 frets, 1-3/4" nut width, 25-1/2" scale, abalone rosette and top purfling, tortoise plastic bound top, soundhole edge, back and headstock, ebony headstock overlay with pearl "Taylor" logo, sea turtle and jellyfish of pearl and abalone inlaid on back of guitar, ebony bridge, gold plated Schaller tuners with ebony buttons, a really beautiful and fine playing guitar, made in the USA, with OHSC (magenta lining) (SN:20001019156)
20U-11867
$3,500.00
|
TAYLOR K-14CE (1998)
14 Photos
EC-, several pick scratches around soundhole and one near binding on lower bass bout, grand auditorium size, rounded cutaway, solid cedar top, solid figured koa sides and 3-piece back, 14-fret mahogany neck, tortoise plastic-w-bound ebony fretboard with fancy agoya shell inlays, 1-3/4" nut width, 25-1/2" scale, ebony bridge, tortoise plastic-bound body with agoya shell top trim and soundhole rosette, ebony headstock overlay with pearl "Taylor" logo and fancy shell inlay, gold tuners, Taylor Prefix Blender pickup / preamp system, with brown tolex OHSC (burgundy lining) (SN:980408140)
20U-11473
$2,400.00
|
TAYLOR K-20CE (2003)
12 Photos
EC+, acoustic-electric, rounded cutaway, D-size, 15-7/8" lower bout, figured koa top, back and sides, gloss finish, 14 fret mahogany neck, tortoise plastic-white 20 fret ebony fingerboard with fancy inlays, ebony bridge, ebony peghead overlay with fancy inlay and "Taylor" logo, gold Grover Rotomatic tuners, tortoise plastic-w-b body and soundhole binding, Agoya shell top purfling and soundhole rosette, factory Taylor Expression pickup system, 25.5" scale, 1-3/4" nut width, 3-5/8" to 4-7/16" body depth, with brown OHSC (black lining) (SN:20030225155)
20U-11677
$2,650.00
|
TAYLOR W-14-C (1998)
14 Photos
EC- with one large top ding, 15-7/8" lower bout, rounded cutaway, solid cedar top, nicely figured walnut sides and three-piece back, 14-fret mahogany neck, 20-fret ebony fingerboard with fancy inlays, 1-3/4" nut width, 25-1/2" scale length, ivoroid-bound body, neck and headstock, ebony peghead overlay with "Taylor" logo and fancy inlay, abalone top trim and soundhole rosette, ebony bridge, gold Grover Rotomatic tuners, Fishman Matrix pickup and 1/4" jack installed, with brown tolex OHSC (raspberry lining) (SN:981002144)
20U-11659
$1,850.00
|
TAYLOR XX-MC 20TH ANNIVERSARY (1994)
12 Photos
EC-, Limited Edition (#221 of 250), grand auditorium size, 15-3/4" lower bout, cedar top, mahogany back and sides, 14-fret mahogany neck, rosewood-bound 20-fret ebony fingerboard, fancy 20th Anniversary engraved pearl inlay from 12th to 18th fret, 1-25/32" nut width, 25-1/2" scale, ebony bridge, rosewood-bound body with turquoise back and side purfling, turquoise and abalone rosette, gold Grover Rotomatic tuners, active i-Beam pickup installed, on consignment, with brown OHSC (raspberry lining) (SN:940913124)
20U-11519
$2,300.00
|
TAYLOR XXX-RS 30TH ANNIVERSARY (2004)
12 Photos
EC+ with a finish crack at upper bout bass side, Limited Edition, #152 of 250, grand concert size, gloss natural finish, sunburst spruce top, Indian rosewood back and sides, 14-fret mahogany neck with slotted headstock, 20-fret ebony fingerboard with engraved pearl 30th Anniversary inlay, 1-3/4" nut width, 24-7/8" scale, ebony bridge, ivoroid-bound body, abalone rosette and top trim, ebony armrest installed, ebony overlays on front and back of headstock (pearl "Taylor" logo on front and floral inlay on back), engraved Waverly Sloane tuners with ivoroid buttons, inner label signed by Bob Taylor and Kurt Listug and dated 8/23/2004, with brown tolex OHSC (black lining) (SN:20040811108)
20U-11397
$2,600.00
|
TOM ANDERSON CROWDSTER (2006)
13 Photos
EC+, Tom Anderson's entry into the acoustic-electric market, blueburst finish, figured maple top on a chambered alder body, bolt-on mahogany neck, rosewood fretboard, dot inlays, 22 frets, pinless acoustic style bridge, Anderson factory-voiced L.R. Baggs under saddle pickup system, Buzz Fieten tuning system, 1-5/8" nut, 24-3/4" scale, with OHSC, on consignment (SN:06-23-04A)
20U-11893
$2,000.00
|
VEGA A-25 (1960's)
13 Photos
EC- except for repaired top center seam, D-shape (but slightly smaller than D-size), 14-7/8" lower bout, gloss natural finish, all solid woods, X-braced spruce top, mahogany back and sides, 14-fret mahogany neck, 20-fret rosewood fingerboard with dot inlays, 1-23/32" nut width, 24-7/8" scale length, rosewood bridge, tortoise plastic pickguard, tortoise plastic bound body, bone nut and saddle installed, black peghead with gray "Vega" logo, Grover Sta-tite tuners with butterbean buttons, label reads "Vega Instrument Co. / NEEDHAM HEIGHTS, MASS. 02194", built in the U.S.A., with semi-HSC (yellow lining), "CHRIS LINGER" stenciled on lid (SN:12035)
20U-11113
$1,200.00
|
WECHTER 5713 PARLOR (recent)
12 Photos
EC except needs some minor work (polish frets, setup, etc. - sold AS-IS), parlor size, 13-1/2" lower bout, 3-3/8" to 3-3/4" body depth, gloss natural finished solid spruce top, scalloped braces, satin finished rosewood back and sides, 14 fret nato neck with bound rosewood fingerboard, 20 frets, small dot inlays, ivoroid bound top, back, neck and headstock, b-i-b top purfling, abalone rosette, ebony bridge with compensated saddle, 1.7" nut width, 25-1/2" scale, sealed back tuners with chrome buttons, made in China, with gigbag (SN:17183)
20U-11865
$315.00
|
WECHTER PATHMAKER (c.1995)
14 Photos
EC, acoustic-electric, satin natural finish spruce top, rosewood sides & back, unique double cutaway body, neck meets body at 19th fret, 22-fret rosewood fretboard with offset dot inlays, walnut bridge, 15-1/2" lower bout, 1-11/16" nut width, ~25.5" scale, 3-1/2" to 4" body depth, abalone soundhole rosette, factory Fishman Prefix Plus pickup system with volume, 4-band EQ and notch filter, tortoise plastic pickguard, made in Michigan, on consignment, with arched-lid OHSC (green lining) (SN:72)
20U-11923
$1,200.00
|
WM. B. TILTON PARLOR GUITAR (mid-1800's)
14 Photos
VG-EC except needs work (glue open back seams, redo old repair: reglue & reinforce major side crack, repair broken tailpiece, 5 missing frets, reseat and dress frets, reset neck, repair top crack, remove added cloth fret markers, setup, strings, etc. - sold AS-IS), ladder-braced spruce top, Brazilian rosewood sides and back, 12-fret mahogany neck, 18-fret ebony finberboard, slotted headstock, decorative 3-in-a-line tuners with bone buttons, 1-25/32" nut width, ~24-1/2" scale, replacement (but very cool) decorative metal tailpiece (needs repair), 11-1/2" lower bout, unbound body, b-w-brown-w-b soundhole ring, nickel-silver soundhole medallion engraved "Wm. B. TILTON'S / IMPROVEMENT / Patented March 4 1856 / ZOGBAUM & FAIRCHILD / NEW YORK" is mounted on the longitudinal wooden bar that constitutes the "Improvement", made by John C. Haynes and stamped on back of headstock "John C. Haynes & Co. / Boston", with coffin case (SN:03091)
20U-11855
$1,200.00
|
Flat-top Guitars
 other vintage and used categories . . .
|
|
|
|
| 
